Package No. APART/NOCP/I C/PHYSICAL INTERFACE

Amount

CIVIL WORKS: DISMANTLING WORKS: Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (ii) Area of door/window above 3.00 m2

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

BRICK MASONARY: 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick/ R.B wall

TILES WORKS: VITRIFIED TILES: A) ON FLOOR : Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) c) Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 1200mmx600mm and above

ON WALLS: Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).iii) Of size300mmx600mm and above

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) Normal Quality (i) With Fix-A-Tile (Chaksey/Sika//Pedelite/rouf)

ANTISKID TILES: VITRIFIED: ii)Executive range-1 (Sizes 600 mm x 300mm and above) a) Nitco made (Oak Wood)

CEMENT PLASTERING: 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4

Extra over item no 12, 13 for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed. ii) 15 mm thick plaster b) In cement mortar 1:4

Extra over item no 12 and 13 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster

Extra over item no 12 & 13 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster

CEILING, LINING AND PARTITION: GYPBOARD CEILING: Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) wall lining which includes 12.5mm/ 9.5mm thick Gypboard (conforming to IS:2095-1982) screw fixed to the Ceiling section of size 0.55mm thick having a knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm made of G.I. Steel placed at 600mm c/c in perimeter channels of size 0.55mm thick having one flange of 20mm and flane of 30mm and a web of 27mm made of G.I. Steel fixed to the floor & ceiling with nylon sleeves & wood screws at 600mm c/c. Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) wall lining which includes 12.5mm/ 9.5mm thick Finally the boards are to be jointed and finished so as to have a Flush look which includes filling and finishing with jointing Compound, joint paper tape, two coat drywall top coat suitable for Gypboard complete as specified and directed at all levels (Glass wool to be measured and paid separately) (For light finishing, skirting providing opening for doors, windows, ventilators etc. cut out made with the frame of perimeter channel supported suitably to be measured and paid suitably when necessary). B) M/F wall lining with plain Gypboard 12.5mm thick.

ACOUSTICAL APPLICATION: Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm x 600mm of 13mm/15mm thickness to be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed. B) Using 15mm thick ceiling tiles

CHOWKATHS: Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

PVC Windows: Supplying and installing uPVC- Casement Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. (c) Double leaf Side hung Window with a Dummy Mullion - French Window (2 Panels) using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

CURTAIN WALL, CURTAIN GLAZING, STRUCTURAL GLAZING: Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels.s. (a) with 12 mm thick toughen glass

WALL PUTTY Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

Wall Painting: Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Extra over item no 23 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

BLIND: Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds (a) Regular iii) 75 mm

REINFORCEMENT: Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. .

FIRE FIGHTING WORKS: FIRE EXTINGUISHER: Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark(05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Testing and Commisioning of loop card for addressable panels make (MORLEY/FIRELITE/APOLLO or equivalent as approved by the deptt)

ADDRESSABLE FIRE ALARM & DETECTION SYSTEM: Supply, Installation, Testing and Commisioning of Addressable Semi Flush Mounting Resettable ( Non Breaking Glass) MCP, supplied with special Reset Tool Brand : ( MORELY/FIRELITE/Appollo or equivalent as approved by the Deptt.)

Supply, Installation, Testing and Commisioning of Addressable Wall Mounting Sounder/Hooter Cum Strobe Brand : ( MORELY/FIRELITE/Appollo or equivalent as approved by the Deptt.)

Supply, Installation, Testing and Commisioning of Addressable Input/Output Module Brand : (MORELY/FIRELITE/Appollo or equivalent as approved by the Deptt.)

Supply, Installation, Testing and Commisioning of Addressable Loop Isolator Brand : (MORELY/FIRELITE/Appollo or equivalent as approved by the Deptt.)

Supply, Installation, Testing and Commisioning of Response Indicator.

Supply, installation, testing & commissioning of intelligent plug in photo electric smoke detectors having features like integral communication, dual LED for 360˚ viewing angle, walk test with address display etc. UL/ LPCB approved, make : HONEYWELL, MORLEY IAS, Model : MI -PSE or equivalent as approved by the Deptt.

Supply, Installation, Testing and Commisioning of Monitor Module. UL/ LPCB approved, make : HONEYWELL, MORLEY IAS, Model : MI -PSE or equivalent as approved by the Deptt.

Supplying and Installation of photo Luminescent exit board in RED/GREEN colour of size 300 X 150 mm.

Supply & fixing of 2X1.5 sq. mm. PVC insulated copper Armoured Cable on surface/recess/above false ceiling etc. as required. ( ISI marked)

Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

SANITARY WORKS: EUROPEAN TYPE WATER CLOSET: Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) iii) Jaquar make a) White (vii) Kubix (Cat. No.KUS-WHT-0311) (inclusive of seat cover and fittings)

CONCEALED CISTERN: Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) (C) Jaquar Make Concealed Cistern (Cat.No.CIB-WHT-31801011X) with Control Plate (CP) (Cat. No. CIS-CHR-31191510X)

WASH BASIN: Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Table Top Basin (C) Jaquar Make(vi) JDBC (Cat. No.JDS-WHT-0547)

KITCHEN SINK (STAINLESS STEEL): Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (B) Nirali (ix) Grace Plain Jumbo (Bowl Size - 610 x 460 x 254) Glossy

MIRROR: Providing fitting and fixing Decorative Mirror complete as directed and specified. (B) Jaquar Make (a) Double Arm Wall Mounted reversible plain / Magnifying (3X) Pivotal Mirror (Cat. No.ACN-1193N)

SHELF: Glass shelf with C.P. guard rail (iii) Jaquar make (c) Kubix 600mm long (Cat. No.AKB-35771)

SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSE AND LIQUID SOAP CONATINER Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (i) Jaquar Make (c) Kubix with glass bottle (Cat. No.AKB-35735)

TOWEL RAIL, TOWEL RACK & TOWEL RING Providing, fitting and fixing Chrome Plated towel rack complete as directed and specified. (a) Jaquar make (v) Kubix (600mm long) with lower hanger (Cat.No.AKB-35781)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (a) Jaquar make (iv) Kubix towel ring square (Cat.No.AKB-35721)

TOILET PAPER HOLDER Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (a) Jaquar make (vii) Kubix toilet roll holder with cover (Cat.No.AKB-35753)

WASTE COUPLING Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

BOTTLE TRAP: Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (a) Jaquar make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

PVC PIPES, BENDS, JUNCTION, TEES ETC Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenche(ii) 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches (ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches (ii) 110mm dia.

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels a) In exposed surfaces or in trenches.including below G.L. as directed and specified. (i) 160mm dia

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels a) In exposed surfaces or in trenches.including below G.L. as directed and specified(ii) 110mm dia.

Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches (ii) 110mm dia.

Supplying fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels a) In exposed surfaces or in trenches. including below G.L. as directed and specified. (i) 110mm x110mm

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including a) In exposed surfaces or in trenches. below G.L. as directed and specified. (i) 110 mm dia

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including a) In exposed surfaces or in trenches. below G.L. as directed and specified (iii) 75 mm dia

Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. (a) 110 mm

Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified (b) 75 mm

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (i) 160mm dia. PVC cowel of ISI make

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make

GRATING: Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia

PIPING: Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all plain and cpvc brass threaded fittings i/c fixing the pipe with claimps at 1.00 m spacing. This is includes jointing of pipes (A)) Exposed or in trenches b) 20 mm nominal outer dia pipe

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all plain and cpvc brass threaded fittings i/c fixing the pipe with claimps at 1.00 m spacing. This is includes jointing of pipes (A)) Exposed or in trenches e) 40 mm nominal outer dia pipe

BIB COCK: Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (ii) Jaquare make (iii)2-Way bib cock

STOP CLOCK: Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Jaquar (ii) 15mm dia( Angular stop cock with long thread )

PILLAR CLOCK Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii)Jaguar make (b)Long neck with areator

SINK CLOCK Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) (v)Jaquar i) Sink cock with regular swinging spout with wall flange brand

FLUSH CLOCK: Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (iii)Jaquar brand b). Queen's Collection - Flush cock with lever handle (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)

VALVE: Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. a) 50mm dia

(F) REVERSE OSMOSIS (R.O)-For best Quality Drinking Water(III) Taurus 25 lph-do 100 litres storage

INTERNAL ELECTRICAL WORKS Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - (i) rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

(ii) With 2 x 4 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

(iii) With 2 x 6 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Short point up to 3.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point up to 3.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) wiring system. With 3 x 25 sq. mm. + earth continuity with 2x16 sq. mm. cable in 38 mm. dia. rigid Steel conduit.

Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 4-5 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department6-8 module type Metal

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department 12-16 module type Metal

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 4 module

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.8 module

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 16 module

Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of

Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE),CRABTREE complete as per direction of department.

Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLANZE), SCHNEIDER (ZENSELO), including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of

Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

MCB DB (ABB, SCHNEIDER MG, LEGRAND, HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDOASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) MCB IN-comer SPN DB Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP- 43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schineider MG, Legrand, Hager, Crabtree xpro, make) 12 way SPN double door MCB IN-comer TPN (Horizontal DB)

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 12 way TPN (8+36) double door

MCB, MCCB, RCCB, RCBO (ABB, SCHNEIDER MG, Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 3. D Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 3 D Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 3 D Series (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 63A

Supplying installation testing and commissioning of Housing, External Dimensions 144 x 100 x 500 mm, Internal Dimensions 88 x 68 x 383 mm, Operating Temp : - 10 deg C ~ + 50 deg C, Used for Box Cameras (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Supplying installation testing and commissioning of Hard Disk for DVR 2 TB ( SEGATE/WD make)

Supplying installation testing and commissioning of 22" LCD TFT Screen ( SAMSUNG/ ball/LG/MITASHI make)

Supplying installation testing and commissioning of UPS 1 KVA for Back up ( ball/ ELNOVA/APC/ make)

supplying installation testing of UTP CAT6 without PVC conduit

Supplying installation testing and commissioning of System for (SAMSUNG or equivalent HONEYWELL/PANASONIC make) High Resolution WDR Fixed Dome Camera:1/3” CCD with icore ™ DS P, 580 TV Lines of high resolution, Enhanced backlight compensation with WDR, BMB, Minimum illumination 0.001Lux, Enhanced function with DS P, Digital Noise Reduction, PIP(picture in pictur,Quad View, Mirror, Digital Zoom, Multi-language OSD, motion detection, Privacy masking, 3-Axis rotation Design and 360°+10° horizontal rotation, True Day/Night version available (HDC-890N(P)TV/ HDC-895PTV), Dual power version available (HDC-895PV/PTV), Multi Language OSD support.

APW Flexi box Wall mount Rack 6U 19" X 500 mm D Networking Wall mount Rack with Front Tinted Glass Door with Lock PDU 6*5A-01 Nos. Fan 90 cfm 230V- 01 Nos, Mounting Hardware ( Set of 10) - 1 set, 19" 1U Cable Manager- 1 Nos.

Wiring for drawing sub-main line with P.V.C. insulated With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/heavy rigid PVC IS : 9537 Part- III conduit. single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ reccessed PVC conduit ( Berlia/AKG/Precision/Presto/Polycab/MW or equivalent make as approved by the Deptt.) wiring system.

UPS, INVERTER & LAN WORKS Supplying including installation of Inverter (Su-Kam/ Microtech/ V-Guard/ Luminous) with Battery and its case as per direction and specified by the Deptt. Sine wave Inverter 1400 VA/240 V

5 KVA on-line UPS System ( Orion or equivalent make as approved by the Deptt.) with PWM- IGBT technology 230 V AC Input ( 160 V- 280 V) 1 Ph output With isolation Transformer KW output with 0.8 PF, 30 min backup using SMF battery.

APW Flexi box Wall mount Rack 12U 19" X 500 mm D Networking Wall mount Rack with Front Tinted Glass Door with Lock PDU 6*5A-01 Nos. Fan 90 cfm 230V- 01 Nos, Mounting Hardware ( Set of 10) - 1 set, 19" 1U Cable Manager- 1 Nos.

Solid Copper Cable Cat 6 , 4 pair, UTP- 305m SCHEINDER/LEGRAND or equivalent make as approved by the Deptt.

Patch Panel Cat 6 UTP keystone - 24 Port- Loaded SCHEINDER/LEGRAND or equivalent make as approved by the Deptt.

Patch Cord Cat 6 UTP Gray 1m- Moulded SCHEINDER/LEGRAND or equivalent.

Patch Cord Cat 6 UTP Gray 1m- Moulded SCHEINDER/LEGRAND or equivalent.

Supplying installation testing and commissioning of 22" LCD TFT Screen ( SAMSUNG/ ball/LG/MITASHI make)

NON SCHEDULED ITEMS FURNITURE WORKS: Supplying and making of 1 (one) no. work-station having a table-top size of 1650mm(W) X 650mm(D) X 750mm (H) in each direction including a drawer unit consist of 3 nos drawer , made out of 19mm marine grade block-board & 12mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/Century/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles, lock, drawer channel etc. complete as directed and specified

Supplying and making of 1 (one) no. work-station having a table-top size of 1200mm(W) X 600mm(D) X750mm(H) in each direction including a drawer unit consist of 3 nos drawer and front partition for soft board, made out of 19mm marine grade block-board & 12mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles etc. complete as directed and specified.

Supplying and making of 1 (one) no. Team Leader work-station having a table-top size of 1800mm(W) X 600mm(D) X750mm(H) in each direction including a drawer unit consist of 3 nos drawer and front partition for soft board, made out of 19mm marine grade block-board & 12mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles etc. complete as directed and specified.

Nodal Officer Table- in solid acrylic & Laminate.Providing and fixing of working table at location of following sizes. Table to be made of 19mm thick ply/board/MDF with necessary framing in TW. Table to have two levels, writing level at 750 mm height and storage level in the side at 675mm height and back unit at 600 mm height. Tableworking top to be clad in CO-01. Power connection in the table to be made available as per the electrical layout. Table top to be finished in C0-01 - Solid Acrylic Surface as per detail drawing. Inside and below table top to be finished in laminate (0.8mm offwhite). Table to have storage below in form of one pedestal of size 600 x 600 , with three drawers. Table to also have foot rest as per architects drawing. One drawer of it to be filing drawer with necessary accessories. All three drawers to have central locking arrangement. inclusive of wire manager provision. The side table has to be laminate finish. Pedestal to be finished in laminate outside and laminate inside,Cost to include all necessary hardware, wire managers of approved makes.Cost to be inclusive of all necessary Hardware of approved makes.Rate to be as per drawing/detail as given by the Architect.All Storages/Counters/Tables to be factory finished as per actual dimensions as on site, and fixed on site as per Architects details/Drawings.Basic rate of Solid Acrylic CO-01 to be 750 per sft + taxes,and that of laminate 5100/- + taxes per sheet of 8' x 4' rate to be tallied for item code as mentioned in finishes.

File Storage- Supplying and making of 1 (one) no. File storage of size 1200 mm(W) X 500mm(D) X 2100mm (H) in each direction made out of 19mm marine grade block-board & 12mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/Century/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles, lock, drawer channel etc. complete as directed and specified

File Storage- Supplying and making of 1 (one) no. File storage of size 5000 mm(W) X 450mm(D) X 2100mm (H) in each direction made out of 19mm marine grade block-board & 12mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/Century/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles, lock, drawer channel etc. complete as directed and specified.

Pantry Storage -1800(W) x 800(H) x 600(D) &800 high storage with shutters with laminate finish as,with intermediate shelves in laminate finish. 900 high storages to be with laminate finish & intermediate shelves in laminate finish. All hardwares to be off hettich make or equivalent. All Storages/Counters/Tables to be factory finished as per actual dimensions as on site, and fixed on site as per Architects details/Drawings.

Supplying and making of 1 (one) no. Meeting Table having a table-top size of 1500mm(W) X 1050 mm(D) X 750mm (H) in each direction including a neccessary power plug socket made out of 19mm marine grade block-board & 12mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/Century/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles, lock, drawer channel etc. complete as directed and specified

Reception table- 2250(L) X 750(D) X 1050 (H) in Solid Acrylic Surface CO-02.Providing and fixing of reception table at location of following sizes. Table to be made of 19mm thick ply/board/MDF with necessary framing in TW. Table to have two levels, writing level at 750 mm height and transaction level at 1100mm height. Table working top to be clad in CO-02.FRONT to be finished in GREY CO-02 - Solid Acrylic Surface as per detaildrawing. Inside and below table top to be finished in laminate. Table to have storage below in form of two pedestals of size 600 x 600 , with three drawers.Table to also have foot rest as per architects drawing. One drawer of it to be filing drawer with necessary accessories. All three drawers to have central locking arrangement. inclusive of wire manager provision. Pedestals (2 nos) to be finished in laminate outside and laminate inside, Cost to include all necessary hardware, wire managers of approved makes.Cost to be inclusive of all necessary Hardware of approved makes.Rate to be as per drawing/detail as given by the Architect.All Storages/Counters/Tables to be factory finished as per actual dimensions as on site,and fixed on site as per Architectsdetails/Drawings.Basic rate of Solid Acrylic CO-02 to be 750 per sft + taxes, rate to be tallied for item code as mentioned in finishes schedule. Contractor to assume the product specified and quote accordingly .Pedestal to be finished in laminate outside and laminate inside, Cost to include all necessary

Hardwood framework with MDF cladding for laminate finish on one side & Ply wood cladding for paint finish on the other side (paint to be paid seperately.(P7):P/F Framework using 25-50 mm thick hardwood (Kail) members 50x100mm wide. The members to be placed as per grooves & skin fixing pattern or at 600 mm c/c in both directions as per detail design.The fixing of members to be done with screws and the joints to be of the type to achieve rigidity in the frame.This will have 12 mm MDF over the frame Hardwood partition & gypsum board partiotion on the other side. Wood to be treated for anti-termite and FIRE RATED PAINT on framework. Framework to be strenghthened for Audio Visual equipments as required. Laminate Finish Basic Rate: Rs 1500/- + tax

Flush Door (3rd Floor)- 35mm thick composite wooden door system which shall include hard wood frame (150x75mm), stainless steel accessories. (D2 & D3):Location: Toilet Doors, Balcony Door, Store & Record Room. Shutter : 35mm flush door system of approved make with 1.0 mm thk laminate on both sides.Finish : approved laminate of 1.0 mm thickness including providing and fixing ball bearing hinges, door stoppers, rubber buffers including 3 coats of matte/ mellamine polishing on wooden surfaces complete as per detail .Hardware : Door to be complete with hardwares as per finishes schedule: Hettich make Mortise Lock, surfac mounted door closer , Door stopper - D type, door closer and 4 ball bearing flat button hinge with screws / pivot, etc all complete.Hardware - Hettich Eqv , all samples to be approved by Client/Architect.Hettich -Overhead door closerHSA 20/ Eqv. Weight of Doors to be evaluated for final proposal of door closer .Hettich - Floor Mounthed Half moon Door Stopper & Front Door Stopper. Toilet Doors to have Ventilation "jaali". LM-02 Basic Rate INR 2000 per 4'x8' sheet + taxes - Product code to be referred from finishes schedule and vendor to quote appropriately as per product specifications. (with making provision for door Access control system as required, to be paid

Wash Basin Conters of 600 (D) x 750(W) x 600(D) Under counter in ply/board with laminate finish fixed with granite top (granite to be measured & paid seperately) as per architects details/drawings. Basic Rate of laminate 1500/- of 8' x 4' per sheet

Text cut out of MDF (12MM CNC cut)Providing and fixing colored Text as per approved design of 12mm thick MDF partitions as per detail and instructions of the architect.Cost to include cutting design & installation, designing and samples , drafts for client approvals all complete as per design detail. Basic rate is Rs1800/sqm.Make - As per technical specs

CHAIRS: Supplying of Chairs of Monarch Mid Back for office staff, Meeting Room, Reception.

Supplying of Chairs of Sedna Very High Back of Godrej for Nodal Officer

Supplying of Chairs of Sedna Mid Back of Godrej for Visitors in Nodal Officer Room.

Supplying and Providing of 3+1 Sofa with Coffe Table of brand Godrej or equivalent.

Supplying of Chairs for Conferrence Room of brand Godrej or Equivalent as per directed by the Deptt.

PANELING & FINISHING ITEMS: P/F Skin type of 12 mm thk Interior grade MDF over base skin w/dry wall screws at 230mm c/c. This would be up to 50mm above False ceiling level from FFL.This would be fixed straight or curved as per design detail.The outer skin shall have 6/12mm grooves with aluminum 'L' angle bends fixed to the thickness of board at the edges, neatly finished. Complete in all respects to be painted / have graphics (N2). Rate to include differential cost for the 12mm mdf backing instead of12.5mm gypsum. Behind graphic panels/wallpapers.

Laminate Cladding (ML-LM):Providing & Fixing of 1.0mm thk Laminate on a 12mm thk MDF in areas as indicated in proper line and details as per architect instruction. Rate to include making of patterns and grooves as per detail design(a) ML-LM-01 (N4) LM-01 Basic Rate INR 1400 per 4'x8' sheet + taxes - Product code to be referred from finishes schedule and vendor to quote appropriately as per product specifications

CCTV: Supplying, installation, testing and Commission of Gigabyte Switch of 48 por.

Supplying, installation, testing and Commission of Power Adapter.

LAN: Supplying, installation, testing and Commission of 24 Port Gigabyte Switch

Supplying, installation, testing and Commission of Manage Switch (100-1000) SG300 GIGABYTE. Of brand of brand CISCO.

Supplying, installation, testing and Commission of Main Server with the Confuguration of TS150.

Supplying and installation of Key Board and Mouse.

AIR CONDITIONER Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating inverter technology non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 1.5 Ton- Bluestar/Voltas or equivalent make

Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating inverter technology non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 2 Ton- Bluestar/Voltas or equivalent make

Conferrence Table- Repair and Renovate in each direction including neccessary power plug socket made out of 12mm marine grade block-board & 6 mm thick marine grade ply-board of Greenlam/equivalent make and finished in 1mm thick Merino/ Greenlam/Century/equivalent laminate including all necessary accessories like screws, nails, adhesive, paper-tape, drawer handles, lock, drawer channel etc. complete as directed and specified.

POOJA ASSOCIATES(CONTRACT DIVN)