SPECIAL REPAIR TO DSC BLOCK AT INS CHILKA UNDER GE CHILKA

Amount

Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed.

M&L for water proofing treatment to sunken slab surface as per per manufacturer's instructions with the following specification:-. (a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions

Demolition of reinforced cement concrete in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any descrption exceeding 1 Sqm but not exceeding 2 Sqm each from chowkhats and refixing in same opening complete all as specified and as directed.

Taking down shutters of any descrption exceeding 2 Sqm each from chowkhats and refixing in same opening complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood, Glazed & skeleton door shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repair 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F in repair 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F in repair 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F in repair 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F in repair 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new wooden surfaces of any description exceeding 10 cm width or girth complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet and edges will be painted to match with prelam sheet, reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick style considering of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification and as shown on drawing complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window / ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long 01 No, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin type B-21, 02 No and anodised aluminium handle of suitable size 01 No complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window/ventilator shutters of sliding type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, rollers, holding and with locking arrangements complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

Supply only 4.8 mm thick plain sheet glass ,ordinary quality, in square not exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

Supply only 4.8 mm thick frosted sheet glass ,ordinary quality, in square not exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed to joinery complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed to joinery complete all as specified and as directed.

S&F 18 mm thick pre-laminated particle board, exterior grade, pre-laminated both side with decorative choice lamination fixed with screw to timber frame work complete all as specified and as directed.

S&F 8 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 60mmx45mm fixed with suitable channel complete all as specified as directed.

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3Kg of cement per sqm complete all as specified and directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 200mmx300mm or 350mmx250mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rouding to edges of stone slab on edge, such as in steps, cooking plater form and other similar situation complete all as specified and as directed.

M&L 50 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, surface finished even and fair complete all as specified and as directed.

Demolition of brick or stone masonary work built in cement mortar including all quoins , arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), rough finished surfaces of concrete complete all as specified and as directed.

M&L for 18-20mm thick pre-polished machine cut kota stone slab flooring over and including 15mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

Supply only in repairs stack clamps for 110mm pipe made out of 50mmx 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair 4'' inch dia round shape floor trap doom type , chromium plated complete all as specified and as directed. Make :- Prayag cat No FT-03M or equivalent as approved

Supply only water proofing compound complete all as specified and as directed.

S&F in repair 4 mm dia plain mild steel wire galvanised class 3 as in fencing/cloth line with PVC coated including straining and fixing to steel post and to straining bolts, including securing with and provision of galvanised iron tying wire or staples or steel pins etc complete all as specified and as directed. Note:- Each line of wire to be measured.

S&F for anchor fastener round close hook of size 18mmx160 mm inserted into the brick wall, RCC columns and beams by drilling etc complte all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable material to a distance not exceeding 100 M complete all as specified and as directed.

M&L cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of form work complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40mm garaded stone aggregate as in plinth protection,laid in alternate panel including necessary use and waste of form work as requieed, surface finished even and fair complete all as specified and as directed .

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 mmx 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary connection complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair stainless steel sink made out of 1.0 mm thick sheet including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160 mm complete all as specified and as directed. Make : Nirali/Prayag/Blue star as approved

S&F in repairs 15 mm bore dia CP pillar tap of cast copper alloy, fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .

S&F in repair PVC soap tray fixed with screw in the wall complete all as specified and as directed. Make :- Prayag Cat No 195 or equivalent as approved.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia , D type, 600mm long complete all as specified and directed.

S&F in repair 15 mm bore dia stop valves ,fancy type , chromium plated with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia angle valve chromium plated ,fancy type, screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed Make :- Parryware cat No G5307A1 or equivalent as approved.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

M&L for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 40 mm bore and 75 cm long PVC waste pipe for WHB, sink etc complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:4 mixed with water proofing compound, surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on plastered surfaces of walls of any description over 10 cm width or girth etc complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including preperation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying one coat of weather proof acrylic emulsion, anti dust paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on old decorated external surfaces of walls of any description over 10 cm width/girth etc on column/pillars , RCC chajja and facia approved colour complete all as specified and as directed.

M&L for applying two coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer and including preperation old decorated surface of wall complete all as specified and as directed.

M&L for applying two coat of white wash on walls including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.

S&F 125 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets complete all as specified and as directed.

S&F in repair 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair vitreous china urinal bowl flat back, size of 465mm X 355 mmX 265mm white( minimum) with grating and union and waste coupling including fixing plugs, beading urinal against wall in cement mortar 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and as directed.

S&F 25 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.

S&F Continuous piano hinges mild steel, bright finish or electrogalvanised 30mm width of flaps (when open) complete all as specified and as directed.

S&F 25mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose of size 125 mm with swivel joint for fixing to GI pipe of 15mm dia complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of approved shade including preparation of old painted steel surface of any description over 10 cm width or girth complete all as specified and as directed.

S&F 2000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections including 25 mm dia bore ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gram) including dismantling existing unserviceable water tank complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in surface casing caping width not less than 20mm including pressed mild steel concealed box made out of 1.6 mm thick sheet covered with 3mm thick laminated sheets and other accessories required for mounting switches/sockets, accessories such as spacers, saddles, junction boxes for one light / fan / exhaust fan point /5 amp socket controlled by one switch complete all as specified and as directed.

All as per item No 113 above but with 2.5 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 2.5 sqmm PVC FRLS insulated copper cable as earth continuity for power point on independent board complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket outlet 2 in 1, 3 pin 5 Amp, 230 Volt, complete all as specified and as directed.

S&F switch socket combination , 3 pin 16 Amp, 230 Volt, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.

Taking down old serviceable existing light fitting and refixing the same in its original position complete all as specified and as directed.

S&F Exhaust fan 380 mm sweep, 1400 RPM, metal body heavy duty, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

M&L cutting opening through brick/stone wall built in cement mortar for fixing exhaust fan of 300/450 mm sweep and making good the disturbed surface in cement mortar 1:4 and applying two coats of white wash to match with the existing complete all as specified and as directed.

PRASANTA KUMAR PANDA

RCB CONSTRUCTION

ANTARYAMI PANDA AND COMPANY