SPECIAL REPAIR OF TOILET AND CONSTRUCTION OF SEWAGE LINE SEPTIC TANK AND SOAKAGE WELL IN MANESAR CAMP AND CERTAIN OTHER REVENUE WORKS UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10.

Amount

Taking down cement or cement lime plaster, any description, on brick, concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement including liquid water proofing compound @ 200 ml per bag of cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:3 on ceiling and finished fair, even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparing of new plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over including one coat of birla white putty on whole surface, complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 including roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 7 to 8 mm thick as in vertical surface, area of each tile from 0.06 Sqm to 0.18 Sqm (as required at site), set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick on fair faces of brick work in cement mortar 1:3 surfaces to receive tiles complete all specified & as directed.

S&F 20 mm (outer diameter) UPVC pipes SDR 11 including plain and brass threaded CPVC SCH-40 fittings on walls /ceiling or laying in floors including taking down old tubing of 20mm bore complete all specified and as directed.

S&F 25 mm (outer diameter) UPVC pipes SDR 11 including plain and brass threaded CPVC SCH-40 fittings on walls /ceiling or laying in floors including taking down old tubing of 20mm bore complete all specified and as directed.

S & F rotational moulded HDPE water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut, screwd for iron pipe or brass ferrule size 40 mm bore including dismantling of water tanks of any type/pattern not exc 2000 ltr and removing from site of work complete all as specified and as directed.

M&L for granite (of any type) work, 16 t o 18 mm thk (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in over and including 20mm thick screed bed in cement mortar 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and as directed.

S&F in repair Vitrous china wash hand basin white, ovel type over counter Wash hand basin size 550x420 mm, including necessary waste pipe and coupling, Fixing in Granite counter sunk, complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair PVC connections 450 mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and as directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP, complete all as specified and as directed.

S&F in repair 15 mm angle valve/ stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union, complete all as specified and as directed.

S&F in repair bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and as directed.

M&L for 40 mm thick (average thickness) Cement concrete type B-0,1:2:4 (12.50mm graded aggregate) in flooring/ roof padding , finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and as directed.

S&F in repair 100mm dia uPVC floor/ nahani trap with chromium plated grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laying under floor (n.exc 50cm depth) including suitable clamps at one meter of interval complete all as specified and as directed.

S&F PVC (SWR) bends/Tee/ of radius, suitable for 110mm dia PVC pipes with access door fixed complete all as specified and as directed.

Supply and Fixing 200 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or layiing under floor (n.exc 50cm depth) including suitable clamps at one meter of interval complete all as specified and as directed.

S&F PVC (SWR) bends/Tee/ of radius, suitable for 200mm dia PVC pipes with access door complete all as specified and as directed.

S&F factory made FRP gully trap cover with locking arrangement commercial grade having loading capacity 2.5 tonne of size 300 x 300 mm with frame set in cement mortar 1:4 complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base, to be finished even and fair complete including use of necessary form work complete all as specified and as directed.

M&L for coloured Chequered cement concrete tiles 30cmX30cmX 25mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors,laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight, complete all as specified and as directed.

Dismantling of old existing asbestos cement (corrugated, semi corrugated ) sheets of any type complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F MS butt hinges 100mm size, cold rolled, medium weight fixed with welding to steel frames etc complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Excavating over areas, not exceeding 1.5 m deep and getting out in soft & loose soil area on plan exceeding 10 sqm complete all as specified and as directed.

M & L for Hardcore of brocken stones or boulders guage n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled by roller/rammed/cmpaction complete all as specified and as direected.

M&L for providing reinforcement cement concrete M-25 (Design mix) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and as directed.

M&L for Form work to side of columns piers, and simillar work complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5 m span concrete etc complete all as specified and directed.

M&L for Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M&L for M-25 (Design mix) as in RCC wall for septic tank walls, retaining walls, basement wall (using 20mm graded stone aggregate) complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over , cut to length, bent to shape as required, including crancking bending and binding with mild steel (annealed) wire not less than 0.90 mm dia complete all as specified and as directed.

All as per srl item ser no 55.00 here-in-before but 8mm dia.

S&F in repairs factory made SFRC manhole cover of any size any shape (square/rectengular/circular) etc 100 mm thick with frame set in cement mortar 1:4 complete all as specified and as directed.

S&F 100 mm dia cast iron vent pipe spun cast or sand cast fixed to wall or over slabs complete all as specified and as directed.

S&F 100mm dia cast iron bends complete all as specified and as directed

S&F 100mm dia cast iron vent cowls complete all as spcified and as directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old size bricks built in cement mortar 1:6, complete all as specified and as directed.

M&L for laying 200 mm dia Reinforced concrete pipes, class NP2, with collars laid in trenches and jointed as specified complete all as specified and directed.

M&L for cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 200 mm dia complete all as specified and as directed.

M&L for laying 300 mm dia Reinforced concrete pipes, class NP2, with collars laid in trenches and jointed as specified complete all as specified and directed.

M&L for cement mortar concrete bed to 300 mm bore drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

S&F 110 mm dia UPVC pipes type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls, complete all as specified and as directed.

M&L for Cement concrete type B-2,(1:2:4) using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) to distance exceeding 250m but not exceeding 500m and deposited where directed complete all as specified and directed.

S&F PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvenet cement and fixing at site on PVC frame consisting of 35 mm wide and 5 mm thick complete all as specified and as directed.

S&F Powder coated anodised aluminium snap grid frame size 605 x 605 mm, 2-3 mm thick for false ceiling including hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long and acoustic gypsum perforated board 10 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid frame including dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

M & L for complete removal of existing treatment of external wall surfaces by scraping with mechanical wall/ ceiling by vacuum based sanding machine (sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inches / 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology and M&L applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr with Graco-490 spray machine over one coat of primer with and including 1mm thick wall care putty to prepare the surface even and smooth complete all as specified and as directed.

Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete alll as specified and directed.

Cutting chases ,pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades,shelves,lintel,etc and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth.

Excavation in post holes in hard / dense soils , each not exc. 0.50 Cum, getting out, returning filling in and ramming earth in layers not exc. 25cm including watering & removing surplus soil to a distance not exc. 50m & making good surface complete all as specified and directed

M&L for Cement concrete (1:4:8) Type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for steel work in tubuler trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zink chrome primer including preparation of new steel surfaces of any description , not itherwise described , over 10 cm width or girth ,complete all as specified and directed.

Surface dressing in any type of soil not exceeding 15 cm deep complete all as specified and as directed.

M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in holdfasts, coping on edges etc including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:4:8) Type D2 , (40 mm graded crushed stone aggregate) as in sub-base and similar works complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of any colour, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-30 grade over and including 50 mm thick sand cushioning complete all as specified & as directed.

Notes :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claims on this account shall be entertained on a later date.

NEHRA ENTERPRISES (BID ID -3307064)

JINDAL ENTERPRISES (BID ID -3310208)