SPECIAL REPAIR TO BLDG NO 152, 154 AND 158/01 TO 08 OR MD ACCN AT FD BTY LINES OF 25 GRENADIER AT MORAR CANTT, GWALIOR UNDER GE GWALIOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down shutter of any description exc 1.0 sqm but nexc 2.00 sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mm×47 mm made out of 5 mm pre laminated colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and as directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 105x60mm complete.note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items complete all as specified and as directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 125x60mm complete.note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded pre lam colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..

M & L for factory made 35 mm 2nd class Hard Wood, plain framed factory made panelled shutters ( two panel) with lock rail and panel of 9mm B.W.R grade ply or 12mm MDF board exterier grade medium density, wood particle board with commercial veneering on both face IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

S&F 35 mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for security glass etc. Size of members of shutters as spd in IS 1003 supplied and fitted to chowkhats all as spd and directed into squareincluding preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded and Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F galvanised wire cloth, .63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed.

S&F Sheet glass figured quality and glazing with oil putty in square but not exc. 0.5 sqm in each pane 3 mm thick complete all as specified and as directed.

S&F Plain Sheet glass ordinary quality and glazing with oil putty in square but not exc. 0.5 sqm in each pane 3 mm thick complete all as specified and as directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and as directed.

S&F 18 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive to make kitchen cabinet partion ,shelves ,shutter, drawer etc complete as per specificcations and as directed by engineer -in -Charge . Make : Kitply/Rajshree.

S&F Aluminium anodised barrel tower bolt of 200mm of extruded section complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and as directed.

S & F Haps and staple safety type Aluminium anodised with MS hinge pin including bbolt to hinge pin of 100 mm size sixed with screw complete all as specified and as directed.

S & F Magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvenised of not exc 25 mm flaps complete all as specified and as directed.

S&F Aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet etc complete all as specified and as directed.

S&F MS Sliding door bolts Rod pattern stove enamelled black with bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate of 250mm size complete all as specified and as directed.

S&F Alluminium butt hinges of 100mm size type C-22 complete all as specified and as directed.

S&F MS 150 mm ordinary rat tail springs plate type incl.rollar plate etc complete all as specified and as directed..

S&F Extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and as directed..

Taking down existing tarfelt from roof and removing from site all as directed complete all as specified and as directed.

M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and rough mixed with water proofing compond complete all as speceified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

Supply only Liquid water proofing compound complete all as specified and as directed.

M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.4 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L, precast cement concrete tiles of size 250mm x 250mm x 20 mm as in foor top ,confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors, and cut & plished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the GE etc complete all as specified and as directed.

M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone agg as levelling course/mass concrete complete all as specified and as directed.

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and as directed.

M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and as directed.

M&L for machine cut kota stone slab 20mm -25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7 to 8 mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles, 300mmx300mmx 7 mm to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:4) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement including taking down existing cement plaster of any description and in any position and racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

M&L10mm Rendering with CM (1:4) over brick/concrete could surface fair & even surface complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M & L applying two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces etc complete all as specified and directed.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on old steel surfaces over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of old or new plastered surfaces of wall, chhajjasetc and applying one coat of water proof exterier wheather coat (Acrylic exterier emulsion ) complete all as specifed and directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface M&L for applying two coat of cement based paint on walls including preparation of old plastered or un plastered surface complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and directed.

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surface by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots on old plastered or unplastered surfaces of wall including cornices, pilasters etc applying one coat of white wash , complete all as specified and directed.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles directed.

Reinforced cement concrete (normal mix) (20mm graded aggregates) as in shelves etc complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.

Providing precast concrete as in cover slab, lintel etc using RCC (1:2:4) with 20mm graded stone agg including all form mould etc complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed. .

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed. .

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 25mm bore of pipe complete all as specified and directed. .

supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed.

supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed.

S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. .

S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and directed. .

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all as specified and directed.

S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

M & L in repair 75 mm dia of out let PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement complete all as specified and directed.

M & L in repair PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement complete all as specified and directed.

Supply only 10 litres capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete all as specified and directed.

S&F in repair 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed. Make : Neptune series of prayag or equivalent.

S&F in repair 15mm Stop valve screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make : Neptune series of prayag or equivalent.

S&F in repair 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed complete all as specified and directed. Make : Neptune series of prayag or equivalent.

Supply only 15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed. Make : Neptune series of prayag or equivalent.

S&F in repair shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

M&L vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and directed.

S&F of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F Soap dish of CP fixed with pvc rawal plugs and screw complete all as specified and directed.

S &F Tublar towel rail 20mm dia D type 60 cm long between flange Brass CP complete all as specified and directed. Make :- Prayag Cat-BA-40 or equivalent.

S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete all as specified and directed.

S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded poly-ethylene Three layered insulation puff tanks (cylinderical vertical ) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F for stainless steel plate rack for utensils of size (31 x 30 x 10) inch & standard superior quality complete all as specified and as directed. Make Prayag : cat no P-348/Pearl/Parrywere

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mmx460mm built size 410mmx330x160mm complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete all as specified and directed.

S&F Machine pressed precast concrete Tile .( Rubber mould casted Glossy finish) any shape and size 300x300mm of 25mm thick over 20mm thick CM (1:6) screed bed complete all as specified and directed

Demolition of cement concrete /brickwork of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L 10mm thick rendring with CM (1:3) over wall/floor surface even and smooth mixed with WPC complete all as specified and directed.

M&L Providing two coats of water proofing coating of tepecrete of cico , pidicrete of pidilite complete all as specified and directed.by Engineer in charge.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and as diected by engineer in charge.

M&L for 15 mm thick dubbing coat in Cement Mortar (1:4) on ceiling surface complete all as specified and directed.

S & F Small fittins such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals nexc 200 cu.cm each of II nd class HW complete all as specified and directed.

M&L ,Prepartion of New/Old plastered surfaces of walls ,chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade ) complete all as specified and directed in by Engineer in charge.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,150mm long, fixed in floor complete all as specified and directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed

Taking down carefully existing aluminium/copper point wiring (light, fan,socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting,ceiling fan with regulator, sockets, wooden boards, laminated sheets from sunken boxes boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Point wiring with PVC insulated 1.5 sqmm multi stranded FRLS copper conductor cable 1100 volts grade drawn into and including concealed rigid nonmetallic PVC conduit medium grade not less than 20 mm (ISI marked) with all conduit fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes (duly painted with two coats of anti corrosive paint out side and two coats of aluminium paint inside) with 2.8 mm thick HYLAM brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators, etc and 1.5 sqmm multi strand copper conductor cable as continuous earthwire complete for the following :- One light point controlled by one switch. Make For Conduit : - AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

One light point controlled by one switch complete all as specified and directed. .

One fan point controlled by one switch complete all as specified and directed. .

One bell/buzzer point controlled by one switch complete all as specified and directed. .

Two way point controlled by two Nos two switch complete all as specified and directed. .

One 5 pin socket outlet 5 Amps controlled with one switch on the same board complete all as specified and directed. .

One 5 pin socket outlet 5 Amp controlled by one switch on independent board.

All as per item 112 but with 2.5 sqmm multistrand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire complete. Make For Conduit : - AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

S & F modular white cover plate with frame of 08 module complete all as specified and directed.

S & F modular white cover plate with frame of 06 module complete all as specified and directed.

S & F modular white cover plate with frame of 04 module complete all as specified and directed.

S & F modular white cover plate with frame of 03 module complete all as specified and directed.

S & F modular white cover plate with frame of 02 module complete all as specified and directed.

S&F Modular switch 1 way 06 amp single pole complete all as specified and directed.

S&F Modular switch 2 way 06 amp single pole complete all as specified and directed.

S & F modular switch 16A, 1 way of 1 module complete all as specified and directed.

S & F modular socket 16A, 6 Pin of 2 module complete all as specified and directed.

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed.

S & of moduar bell push 6 Amp 1 module complete all as specified and directed.

S & F of modular fan step regulator 120 W-2 module complete all as specified and directed.

S&F of Bell Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Ceiling rose 3 phase/pvc/polycarbonate, isolated body complete all as specified and directed. .

Make of Item Ser No 114 to 127 :- Anchor, Kinjal, Cona

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings including LED Bulb 9W/10W Watt complete. Make of LED Bulb : Phipips, Crompton, Wipro. Make of Lamp Holder :- Anchor, Leader, Cona

S&F decorative ultra slim liniear LED lighting 9/10W LED 6000K, fixture with extruded Al. heat sink, environental friendly, energy efficeint ready to use complete all as specified and directed. Make :- Philips, Havells, Wipro.

S&F decorative ultra slim liniear LED lighting 18/20W LED 6000K, fixture with extruded Al. heat sink, environental friendly, energy efficeint ready to use complete all as specified and directed. Make :- Philips, Havells, Wipro.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick with angle iron 30x30x2 mm complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including locking arrangement and comprising for following fittings incl taking down existing MCB DB TPN 4 way:- (i) MCCB TPN, 63 Amps ,16 KA - 01 No (For incoming) (ii) Amp Meter (0-100 Amp)- 01 Nos Make :AE (iii) Volts Meter (0-500 Volts ) - 01 No Make :AE (iv) Indicator Lamp set of three R,Y,B - 01 Set (v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB SP 40 Amps, 230 volts - 04 Nos (For outgoing) (vii) Nutral bus bar link mounted on insulator. (viii) Place for fixing the energy meter. - 04 Nos (ix) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter.

Sheet metal enclosure MCB DB, double door , 08 way SPN, 240 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete all as specified and directed. Make : Schneider/ Havells/Legrand

S&F MCB single pole and neutral 240 volts, 25 to 40 Amps complete all as specified and directed. Make : Schneider/ Havells/Legrand

S&F MCB single pole 240 volts, 6 to 32 Amps complete all as specified and directed. Make : Schneider/ Havells/Legrand

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L for sub main wiring with 2 runx 6 Sqmm single core PVC insulated cable unseathed multistranded copper conductor LT 1100 volts grade FRLS cable IS-694 (ISI marked with valid CML No ) drawn in & icluding PVC conduit of dia not less than 25mm (ISI marked with valide CML No ) including its all fittings/accessoreis with one run single core copper FRLS cable 6 sqmm multistranded conductor (ISI marked with valide CML No) colour code as a earth continuity and connecting upto DB with suitable lugscomplete all as specified and directed. Make For Conduit : - AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

S&F Earthing complete with galvanised steel earthplate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connecting to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (0.5 metre beyond pit to main switch), PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as specified and directed.

M & L for Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store including painting with two coat of synthetic enamel paint over one coat of primer including wirting of MES No and refixing the same complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core complete all as specified and directed. Make of cable :- Finolex, Polycab, Gloster.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

M&L bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

S&F of 25W of LED security Light fixture with IP66 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC including 40mm dia light grade tbe bracket of 1.2 mtr length bend to shape with two nos clamps 50mmX6mm with nuts both and connection with 15 sqmm cable complete all as specified and directed. Make :- Wipro or equivalent to Philips and Havells.

M/s Ratan Lal Jain and Co.

M/S Rajeev Construction

RAJ AND BROTHERS