DEVELOPMENT WORKS IN PREMISES AND OTHER ALLIED WORKS AT Z.P. GIRLS HIGH SCHOOL VAIJAPUR, TQ. VAIJAPUR DIST. CHH. SAMBHAJINAGAR

REMOVING G.I. OR A.C. SHEET ROOFING including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

REMOVING THE EXISTING CEMENT PLASTER of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

EXCAVATION FOR FOUNDATION IN EARTH, SOIL OF ALL TYPES, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) BY MECHANICAL Means

EXCAVATION FOR ROADWAY IN EARTH, SOIL OF ALL SORTS, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing SOLING USING 80 MM SIZE TRAP METAL IN 15 CM. LAYER including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-10 of trap/ granite/ quartzite/ gneiss metal FOR FOUNDATION AND BEDDING including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ /Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT, STRIP FOUNDATIONS, GRILLAGE AND FOOTINGS of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. COLUMNS as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite/quartzite/ gneiss metal FOR R.C.C. BEAMS AND LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap/ granite / quartzite/ gneiss metal FOR R.C.C. SLABS AND LANDINGS as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-20 of trap/ granite/ quartzite/ gneiss metal FOR R.C.C. PARDI of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mixcement CONCRETE M-20 of trap/ granite/ quartzite/ gneiss metal FOR R.C.C. CHAJJA as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 BAR REINFORCEMENT OF VARIOUS DIAMETERS for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing SECOND CLASS BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN FOUNDATIONS AND PLINTH of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

FILLING IN PLINTH AND FLOORS WITH CONTRACTORS MATERIAL/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing and fabricating STRUCTURAL STEEL WORK IN ROLLED SECTIONS LIKE JOISTS, CHANNELS, ANGLES, TEES ETC. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel)

Providing and fixing CORRUGATED GALVANISED IRON SHEETS OF 0.63MM THICK (24 B.W.G.) FOR ROOFING without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.).

Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal CEMENT PLASTER 12MM THICK in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing internal CEMENT PLASTER 20MM THICK in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing FINE CEMENT FINISH 1.5 MM THICK OVER GREEN PLASTER SURFACE including scaffolding curing etc. complete.

Providing and fixing M40 GRADE THICK VIBRATED PULL CAST OR SIMILAR TYPE CONCRETE FRAME with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) FRAME SIZE 60 MM X 100 MM .

Providing and fixing SOLID CORE FLUSH DOOR SHUTTER IN SINGLE LEAF 32 MM THICK decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing STEEL WINDOW C.R.C. SHEET as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories

REPLACEMENT OF DAMAGED ALDROP 300 MM CHROMIUM PLATED of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.

REPLACEMENT OF DAMAGED TOWER BOLT 300 mm Chromium plated of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.

REPLACEMENT OF DAMAGED ALLUMINIUM HANDLE 125 mm of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.

REPLACEMENT OF DAMAGED ALLUMINIUM BUTT HINGES of 125 mm of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer incharge.

Providing and laying POLISHED TANDUR STONE FLOORING 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying in position FLOORING OF TELEPHONE BLACK / AMBA WHITE / CAT BARY BROWN / RUBY RED / OCEAN BROWN GRANITE STONE of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick TELEPHONE BLACK / AMBA WHITE / Cat bary brown / RBI red / Ocean Brown granite stone FOR TREADS AND RISERS OF STEPS AND STAIRCASES of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and preparing KITCHEN OTTA UP TO 75 CM WIDTH,made up from 30 mm thick and 75 cm high vertical support FOR KADPPA at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete

Providing and fixing on WALLS/ CEILING/ FLOORS, 50 MM DIA HEAVY GRADE HAVING EMBOSSED AS ISI MARK GALVANISED IRON PIPES weight of 6.33 Kilogram/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 50 MM. DIA. MEDIUM CLASS G.I.PIPE GATE with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.

Providing and fixing on WALLS/ CEILING/ FLOOR 25 MM DIA. UPVC PIPE with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on WALLS/ CEILING/ FLOOR 15 MM DIA. UPVC PIPE with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 15 MM DIAMETER PVC AQUA KRAFT TYPE OF APPROVED MAKE SUPER BIB TAP with flange including all accessories etc complete

Providing and fixing 100 MM DIA STABILISER PIPE/ P.V.C. SOIL VENT/WASTE PIPE and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing 15 CM RIGID PVC NAHANI TRAP INCLUDING PVC GRATING ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing SOAK PIT OF SIZE 120CM X 120CM X 120CM including excavating and filling with brick-bats.

PROVIDING AND ERECTING CHAIN LINK FENCING 1.6 M. HEIGHT WITH G.I. CHAIN LINK of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Providing and erecting Y TYPE BARBED WIRE FENCING WITH SEVEN ROWS OF WIRE with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.

Providing and fixing heavy duty inter locking CONCRETE COLOURED PAVING BLOCKS OF 60 MM THICKNESS of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M15 of trap/ granite/quartzite/gneiss metal FOR FOUNDATION AND BEDDING / STEPS including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ / ready mix M-20 CEMENT CONCRETE of trap /granite /quartzite /gneiss metal FOR APPROACH SLAB / RIGID PAVEMENT including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt)

SUPPLYING HARD MURUM/ kankar at the road site, including conveying and stacking complete.

SPREADING HARD MURUM/ SOFT MURRUM/ gravel or kankar for side width complete

Providing and constructing 75 MM. THICK MODIFIED PENETRATION MACADAM (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% CRUSHER BROKEN METAL + 70% HAND BROKEN (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. INCLUDING PICKING OF EXISTING WBM SURFACE. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates)

OPEN GRADED PREMIX SURFACING- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( OVER MPM SURFACE) (VG-30 bulk bitumen rates are considered to arrive at rates)

PROVIDING BITUMINOUS TYPE A LIQUID SEAL COAT ON BITUMINOUS SURFACE including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying TWO COATS OF WALL CARE PUTTY ON PLASTERED SURFACE AND CEILING AND WALLS to prepare surface even and smooth of approved make, etc complete.

Providing and applying PLASTIC EMULSION PAINT of approved quality, colour and shade to old and new surfaces IN TWO COATS including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Providing and applying TWO COATS OF EXTERIOR ACRAYLIC EMULSION PAINT confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing and applying TWO COATS OF SYNTHETIC ENAMEL PAINT of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Please Enable Macros to View BoQ information

SPECIFICATION OF WORKS

REMOVING G.I. OR A.C. SHEET ROOFING including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

REMOVING THE EXISTING CEMENT PLASTER of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

EXCAVATION FOR FOUNDATION IN EARTH, SOIL OF ALL TYPES, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) BY MECHANICAL Means

EXCAVATION FOR ROADWAY IN EARTH, SOIL OF ALL SORTS, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing SOLING USING 80 MM SIZE TRAP METAL IN 15 CM. LAYER including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-10 of trap/ granite/ quartzite/ gneiss metal FOR FOUNDATION AND BEDDING including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ /Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT, STRIP FOUNDATIONS, GRILLAGE AND FOOTINGS of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. COLUMNS as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite/quartzite/ gneiss metal FOR R.C.C. BEAMS AND LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap/ granite / quartzite/ gneiss metal FOR R.C.C. SLABS AND LANDINGS as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-20 of trap/ granite/ quartzite/ gneiss metal FOR R.C.C. PARDI of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mixcement CONCRETE M-20 of trap/ granite/ quartzite/ gneiss metal FOR R.C.C. CHAJJA as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 BAR REINFORCEMENT OF VARIOUS DIAMETERS for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing SECOND CLASS BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN FOUNDATIONS AND PLINTH of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

FILLING IN PLINTH AND FLOORS WITH CONTRACTORS MATERIAL/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing and fabricating STRUCTURAL STEEL WORK IN ROLLED SECTIONS LIKE JOISTS, CHANNELS, ANGLES, TEES ETC. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel)

Providing and fixing CORRUGATED GALVANISED IRON SHEETS OF 0.63MM THICK (24 B.W.G.) FOR ROOFING without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.).

Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal CEMENT PLASTER 12MM THICK in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing internal CEMENT PLASTER 20MM THICK in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing FINE CEMENT FINISH 1.5 MM THICK OVER GREEN PLASTER SURFACE including scaffolding curing etc. complete.

Providing and fixing M40 GRADE THICK VIBRATED PULL CAST OR SIMILAR TYPE CONCRETE FRAME with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) FRAME SIZE 60 MM X 100 MM .

Providing and fixing SOLID CORE FLUSH DOOR SHUTTER IN SINGLE LEAF 32 MM THICK decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing STEEL WINDOW C.R.C. SHEET as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories

REPLACEMENT OF DAMAGED ALDROP 300 MM CHROMIUM PLATED of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.

REPLACEMENT OF DAMAGED TOWER BOLT 300 mm Chromium plated of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.

REPLACEMENT OF DAMAGED ALLUMINIUM HANDLE 125 mm of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.

REPLACEMENT OF DAMAGED ALLUMINIUM BUTT HINGES of 125 mm of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer incharge.

Providing and laying POLISHED TANDUR STONE FLOORING 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying in position FLOORING OF TELEPHONE BLACK / AMBA WHITE / CAT BARY BROWN / RUBY RED / OCEAN BROWN GRANITE STONE of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick TELEPHONE BLACK / AMBA WHITE / Cat bary brown / RBI red / Ocean Brown granite stone FOR TREADS AND RISERS OF STEPS AND STAIRCASES of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and preparing KITCHEN OTTA UP TO 75 CM WIDTH,made up from 30 mm thick and 75 cm high vertical support FOR KADPPA at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete

Providing and fixing on WALLS/ CEILING/ FLOORS, 50 MM DIA HEAVY GRADE HAVING EMBOSSED AS ISI MARK GALVANISED IRON PIPES weight of 6.33 Kilogram/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 50 MM. DIA. MEDIUM CLASS G.I.PIPE GATE with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.

Providing and fixing on WALLS/ CEILING/ FLOOR 25 MM DIA. UPVC PIPE with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on WALLS/ CEILING/ FLOOR 15 MM DIA. UPVC PIPE with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 15 MM DIAMETER PVC AQUA KRAFT TYPE OF APPROVED MAKE SUPER BIB TAP with flange including all accessories etc complete

Providing and fixing 100 MM DIA STABILISER PIPE/ P.V.C. SOIL VENT/WASTE PIPE and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing 15 CM RIGID PVC NAHANI TRAP INCLUDING PVC GRATING ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing SOAK PIT OF SIZE 120CM X 120CM X 120CM including excavating and filling with brick-bats.

PROVIDING AND ERECTING CHAIN LINK FENCING 1.6 M. HEIGHT WITH G.I. CHAIN LINK of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Providing and erecting Y TYPE BARBED WIRE FENCING WITH SEVEN ROWS OF WIRE with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.

Providing and fixing heavy duty inter locking CONCRETE COLOURED PAVING BLOCKS OF 60 MM THICKNESS of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M15 of trap/ granite/quartzite/gneiss metal FOR FOUNDATION AND BEDDING / STEPS including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ / ready mix M-20 CEMENT CONCRETE of trap /granite /quartzite /gneiss metal FOR APPROACH SLAB / RIGID PAVEMENT including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt)

SUPPLYING HARD MURUM/ kankar at the road site, including conveying and stacking complete.

SPREADING HARD MURUM/ SOFT MURRUM/ gravel or kankar for side width complete

Providing and constructing 75 MM. THICK MODIFIED PENETRATION MACADAM (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% CRUSHER BROKEN METAL + 70% HAND BROKEN (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. INCLUDING PICKING OF EXISTING WBM SURFACE. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates)

OPEN GRADED PREMIX SURFACING- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( OVER MPM SURFACE) (VG-30 bulk bitumen rates are considered to arrive at rates)

PROVIDING BITUMINOUS TYPE A LIQUID SEAL COAT ON BITUMINOUS SURFACE including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying TWO COATS OF WALL CARE PUTTY ON PLASTERED SURFACE AND CEILING AND WALLS to prepare surface even and smooth of approved make, etc complete.

Providing and applying PLASTIC EMULSION PAINT of approved quality, colour and shade to old and new surfaces IN TWO COATS including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Providing and applying TWO COATS OF EXTERIOR ACRAYLIC EMULSION PAINT confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing and applying TWO COATS OF SYNTHETIC ENAMEL PAINT of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.