SPECIAL REPAIR OF OR MARRIED ACCN (BLOCK NO 155, 153 and 154 TOTAL 20 QTRS) AT MALKIT COLONY QTR OF 1 TTR, 1 STC UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster / terrazo of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L 15mm thick rendering on concrete/brick surfaces in CM 1:4 using liquid water proofing compound as per Manufacturer's instruction complete all as specified & directed . ( Note:- Liquid WPC shall be measured and paid for separately)

M&L 5mm thick rendering in Cement Mortar (1:3) on concrete surfaces, ceiling etc, finished even and smooth, without using extra cement complete all as specefied and directed.

M&L for preparation of newly plastered surfacces and applying three coat of white wash in ceiling complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over and including 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

M&L for preparing newly plastered surfaces of external walls and applying two coats of cement base paint over a coat of appropriate primer complete all as as specified and as directed.

M&L for complete removal of existing treatment & washing, rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of cement base paint on external wall complete all as specified and directed. Note:- Curing shall be done before and after applying of paint.

M&L for complete removal of existing treatment & washing, rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of oil bound distemper over priming surafce after and including 3mm thick wall care putty on wall complete all as specified and directed

M&L for prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and trading oil and greasy spots, brooming down or steel wire brushing, removing nails, making good holes, cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified & directed.

M&L for Prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (white or tinted) complete all as specified and as directed.

M&L for Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & as directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed.

M & L for RCC M-20 (Nominal Mix) using 20mm graded crushed stone aggregate as in chajjas complete all as specified and as directed.

M&L for RCC M-20 ( nominal mix) using 20mm grades stone aggregate as in Fins, fascias, louvres,parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed.

M & L for form work to faces of walls, retaining walls , abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter surface fair finished complete all as specified and directed.

M & L for form work to chajjas and similar items including edges etc complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia and cut to length, bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. (Note : The reinforcement shall be welded with existing reinforcemnet after dismantaling of RCC Chajjas/Parapets etc.)

M&L for 15mm thick plaster in two layers,with & including wire netting of galvanized steel wire 0.91mm dia and mesh size 12mm placed in walls before plaster layers and fixed with tinned tack or wire stapled where required first layer of 10mm thick plaster in cement mortar 1:4 & second layer of 5mm thick in cement mortar 1:3 including taking down loose /bulging surafces of plaster or concrete as in chajjas, beam balcony, fins etc, to make to original shape, at any height to repair chajjas, beam balcony fins etc in multistoreyed buildings, top layer of plaster finished even & smooth without using extra cement complete including cleaning and preparation of existing RCC surfaces and applying a coat of cement slurry and surface shall match & finish the plastered surface by applying two coats of anti-fungal exterior emulsion paint complete all as specified and directed.

S & F expanded metal,n exc 4 Kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

Roughening surfaces of old concrete floor/terrace by picking including taking down existing deterioted / decayed tarfelt/ PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials/ debris to a distance not exc. 50 m complete all as specified and directed.

M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashings and junction of parapet,etc,and surface painting with a layer of blown grade bitumen of any penetration, applied hot @1.70 kg per sqm, blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered complete all as specified and directed. ( Note :-Area of flashing etc.shall be added to the roof area.)

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound as per Manufacturer's instructions, on concrete roof surface, finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-

(a) Cleaning plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(c) One layer of 3 mm thick APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm reinforced with polyster non woven fabric shall be unrolled over surfaces with side lap of 100 mm and end lap of 150 mm and the over lap shall be sealed by flame.

(d ) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

M&L for 20mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut, pressed, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and directed

M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position complete all as specified & directed.

M&L for 25MM thick cement concret Type B-1, 1:2:4 (Using 20mm graded crushed stone aggregate ) as in sub base complete all as specified and directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with liquid water proofing compound as per Manufacturer's instructions, in top 5mm thick, finishing the surfaces with even and smooth without using extra cement complete all as specified and directed. ( Note:- Liquid WPC shall be measured and paid for separately)

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg per sqm per coat and including polythene film, black , 50 micron laid in floors over bitumen complete all as specified and directed.

M&L for lean concrete (1:5:10) Type E2 using 40mm graded crushed stone aggregate, laid compacted complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs including necessary formwork, rounded or chamfered on edges complete all as specified & directed.

S&F GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as sunken spout all as specified and directed

Supply only Liquid water proofing compound, ISI marked, complete all as specified and directed.

Dismantling of brick work as in walls/parapet walls, removing grass, fungus, weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and directed.

M&L for Brick work with sub class ‘B’ fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ fly ash brick, straight or curved on plan, to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed .

Dismantaling floor hearth or wall tiling/china mosaic including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250, 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tile , laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc, laid over and including 10mm thick cement plaster 1:4 complete all as specified and directed.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs, pillars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite, laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut Cudappah stone slab on cooking platform/shelf, 20-25mm thick, laid over and including 20mm thick cement screed base in (1:4), laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. to the entire satisfaction of Engineer-in-Charge complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 20- 25 mm thick machine cut kota stone flooring, over and including 20 mm thick cement screed bed ( 1:4), laid and jointed with neat cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces, risers of steps , skirting, dado and pillars etc, set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match with the shade of stone slab, laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and polishing complete all as specified & directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection, finished even & fair without using extra cement, laid in bays with construction joints 6mm thick, joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) (1:4) complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations,filling and mass concrete and sub base finished even & fair complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block, any shape and size, with grey cement and pigment, conforming to IS 15658-2006, 60mm thickness, M 35 Grade complete all as specified and as directed.

M&L for 50 mm thick Sand cushion under floors/paver block complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-Reinforcement where provided shall be measured and paid for separately)

Taking down chowkhats or frame (with shutter without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame (with shutter without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4 sqm each complete all as specified and directed.

S&F pressed steel door frame 105x60 mm with one or more rebates including fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F pressed steel frames, size 125x 60 mm, for doors with one or more rebates including fixing lugs, hinges, lock, strike plate etc complete all as specified and as directed.

S&F aluminium anodised sections for doors/windows/ventilators with one or more rebates including jointing cleatand locking arrangment for fixing etc complete with frames, shutters and grills of size as directed by Engineer-in-charge complete all as specified and directed. (Note:- sheet glass, wire cloth shall be measured and paid for separately.)

M&L PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in filling of pressed steel door frame complete all as specified and directed.

S & F factory made 2nd class hardwood, 35 mm thick, plain framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F factory made, 35 mm thick, 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc , size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed. ( Note : Glazing and wire cloth will be measured and paid for separately

S&F PVC door frame, size 50mm x 47mm, made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening, as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC, 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified and as directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F continuous (piano) hinges,mild steel bright finish or electrogalvanised,width of flaps 30 mm all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified & directed.

M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screw to timber/steel frame work as in repair complete all as specified and as directed.

M&L for 19 mm thick prelaminated particle board, interior grade,prelaminated both sides with decorative choice laminations fixed with screw to timber/steel frame work as in repair complete all as specified and as directed

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each pane complete all as specified & directed

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified & directed.

S&F aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed.

S&F MS Peg set of six powder coated as approved by GE complete all as specified and as directed

M&L for mild steel pipe 25 mm dia Drapery rod fancy type with PVC coating, fixed in the MS hooks and finials/side brackets (both side), shade as approved by GE complete all as specified and as directed

M&L for cutting holes in brick walls, exc half brick but nexc one brick, in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L for treating small article such as stops, covers, gully, gratings and hold fast ends & post backs of chowkhat etc with creosote oil, tarred area n exc 0.10 Sqm each complete all as specified and as directed

M&L for preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

M&L for preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified and as directed

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and as directed

Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified and as directed

S & F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (concealed) and ceiling or laid in floors complete all as specified and directed.

S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

S&F Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm in girth complete all as specified and as directed

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F, in repair, 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S&F, in repair, for 15mm chromium plated brass WHB mixer, fancy type, swan neck , long nose, screwed down high pressure with or without lettered hot and cold and fly nuts 15 mm dia complete all as specified and directed.

S&F, in repair, fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and as directed

S&F, in repair, C P glass corner shelf, set of three single including screws and CP bracket complete all as specified and directed.

S&F, in repair, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf , 12cm wide with chromium plated bracket guards and railing 600 mm long complete all as specified and as directed (Make- Jaquar Cat Part No- AKP 35715PS or equivalent as approved by GE.)

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union, overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and as directed

S&F, in repair, kitchen plate rack, made of stainless steel 1mm thick, complete size 1200 x 900mm x 200mm width, of trade pattern complete all as specified and as directed

Soap dish, stainless steel, approx size 160mm x 160mm x 90mm complete all as specified and directed.

M&L for 32 mm bore Low Density Polyethylene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified & directed.

S&F, in repair, grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and as directed

S& F, in repair, chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size, complete all as specified and directed. (Make- Prayag Cat Part No 554 or equvalant as approved by GE.)

S & F, in repair, Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S & F, in repair, Towel ring, brass chromium plated, round type, fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F in repair vitreous China squatting pan of Orissa pattern , size 580 x440 mm white with integral foot rests, any pattern (excluding flushing cistern and flush pipe) complete including provn of lean concrete bedding or cement concerete filling in 1:5:10 type E2, connection to flush pipe , trap etc & making good the disturbed surface complete all as specified and directed.

S&F , in repair, 10 ltr PVC, valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle, with and including flush pipe complete all as specified & directed.

S& F, in repair, Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed.

S&F CP waste fittings brass chromium plated for sink 32mm dia with long screwed shanks and fly nuts , flenge end bedded in red lead cement and other end fixed all as specified and directed.

S&F CP waste fittings brass chromium plated for sink 40mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other end fixed all as specified and directed.

M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with plain cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ), including all fittings,heads,shoes,bends,swan necks etc. including cleaning or refixing or removal to store complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) pipes, Single socketed, in any length with rubber rings, joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, laid in floors, trenches complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) branch piece, double (double Y), equal or unequal with access door , rubber rings, joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parallel branches of 110 mm dia with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends, any radius, with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M & L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed

M & L PVC(SWR) Tee of 75mm dia with access door etc complete all as specified and directed

S&F PVC (SWR) gully trap 125 x 110 mm, setting and jointing with solvent cement complete all as specified & directed.

S & F stack clamps out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe, etc complete all as specified and directed.

Dismantling water tanks exc 250 litre but n exc 500 ltr capacity complete all as specified and directed.

S& F 500 litre rotational moulded polyethylene double layered water storage tanks( cylinder vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

S & F 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified & directed..

S&F 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as directed.

S&F 25mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as directed

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge.

Taking down carefully Main switch and Distribution boards any make and size all as directed.

Taking down carefully and refixing ceiling fan/Exhaust Fan of any sweep and size complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge.

M & L for Sub Main wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawn into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge (Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length to be measured as one unit length.)

M & L for Sub Main wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 4.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge (Note :- Two Nos of 4.0 Sqmm wire and One No of 4.0 Sqmm Earth wire in One RM length to be measured as one unit length.)

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunken cast iron/pressed steel terminal boxes duly painted with two coats of anti-corrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed :-

One light point/Bell point controlled by one switch.

One fan point controlled by one switch.

One socket point controlled by one switch on same board.

One socket point controlled by one switch on Independent board.

Description all as per item No 143 here in before but with 1100 volts grade copper stranded conductor cable of size 2.5 Sqmm with 1.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15 Amp on independent board complete all as specified and directed .

S & F, in repair, for bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F, in repair, for Socket outlet 3 pin, 5 Amps, AC 230 volts, flush type complete all as specified and directed .

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed .

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed .

S & F in repair fan regulator step type of polycarbonate body complete all as specified and directed.

S & F in repair lamp holder PVC Polycarbonate type body, with back plate for batten fitting including 9 watt LED lamp complete all as specified and as directed .

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start extruded aluminium housing, energy efficient, flicker free start inbuilt driver unit suitable for wall and ceiling mounting using brackets (supplied along with) and testing on comletion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), complete all as specified and directed. (Make : Philips Cat part No BN 021 LED 22S 6500 PSU GR S1 or equivalent in Crompton Greaves/ Wipro as approved by GE.)

S & F, in repair, LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor application , connector block, etc complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. ( Make- Havells LUMILINEPLUSBS10WLED865SPCSS or equivalent in PHILIPS /BAJAJ as approved by GE)

Supply and fixing, in replacement, decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.

S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. Make :Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ as approved by GE)

Supply & fix, in replacement, LED Security Light Luminaire 25 watt 6000K with high power LED cool white,CRI 75 +/- 5% supply voltage 220/240/50 Hz, light engine driver base pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint complete all as specified and as directed. (Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in Philips or Bajaj as approved by GE)

S & F Exhaust fan heavy duty, sweep 300 mm, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed .

S & F Exhaust fan heavy duty plastic body, sweep 250 mm , single phase AC 230 v, 50 Hz , including making hole of required size and making good the disturbed surface and including louvers with fitting accessories complete all as specified and directed .

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4 way with 100 Amps rated bus bar 240 volts single pole and neutral , double door complete all as specified and directed. (Make- Legrand cat part No.- 507780/Seimens/GE as approved by GE).

S & F, in repair, MCB TPN 415 volts 63 Amps, 'C' Series complete all as specified and directed .

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 100 Amps rated bus bar 240 volts single pole and neutral, double door complete all as specified and directed . ( Make- Legrand Cat part no: 5076 21,/seimens/GE as approved by GE.).

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, 'B' Series complete all as specified and directed .

Supply and fixing in replacement MCB single pole 240 volts upto 40 Amps, 'B' Series complete all as specified and directed .

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Supply & fixing electronic energy meter tamper proof design digital technology of SINGLE phase 1 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete with fixing accessories on finished wooden box all as specified & directed at site. Make :SARAL OF SECURE OR equivalent as approved by GE.

Earthing complete with galvanised steel earth plate electrode 600 x600 x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour in respect of the followings : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) Reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. (Note : GI wire and protection pipe upto 7.50 metre is deemed to be included in the unit rate quoted against this item)

S & F, in repair, for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed .

Supply , laying and testing LT cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4.0 core 25 Sqmm including taking out old unserviceable cable complete all as specified and directed . ( Note : Earth work and excavation, sand cushioning and cable protection will be measured and paid for separately)

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed ( Note : Punned thickness will be measured for payment).

M & L for Bricks, well burnt clay building fly ash bricks, sub class 'B' for protection of cable in trenches, laid with length of bricks perpendicular to the axis of cable complete all as specified and directed.

M & L for cement concrete type B-2, 1:2:4 (40mm graded crushed stone aggregate) 150mm thick in paving etc complete all as specified and as directed.

M & L for removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M & L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M & L for GI Tubes,of size 40 mm bore, light grade, galvanised, with all fittings , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Schedule of credit amount of Rs 1,69,450.00 to be deducted during AOC

Rai Construction Co

M/s Ram Associates

DOBARIA BUILDCON