Purchase of Equipments and machinery for maintenance repair and service laboratory

Medium duty Centre lathe 1) The length between centers 1000 mm , 2) the height of the centers 120-150 mm, 3) the swing diameter over the bed 250 mm, 4) the swing diameter over the carriage 180 mm (All are near values ) 2) Belt connected with pulleys to vary the speed of the lathe. 3) Motor of single / Three phase 1 HP .

Tail stock assembly - Tail stock assembly suitable for dismantle and assembling purpose.(same as suitable to above lathe model)

Medium duty drilling machine Medium duty drilling machine 25 to 40 mm , motor of single / Three phase 1 HP , Table size around 300 to 400 mm.

DC Motor RO DC Motor with pump , 12 / 24 /36 Volt DC AC Convertor

Hydraulic cylinder bore dia 40 mm , Stroke length 200 to 300mm. - for dismandling and assembling purpose.

Hydraulic operated Directional Control valves (DCV), Hand lever operated, Valve position 4/3 spring return / Manual operated.

Bearing with shaft assembly unit 204 bearing with 20 mm shaft and 2 jaw bearing puller .

Coupling unit using driving and driven shafts using Plummer block bearing unit . Love joy coupling unit , Flanged Coupling Housings SNN / SNC series Shaft diameter 20 – 30 mm.

Belt drive unit using motor , V / other belt with driving and driven pulley V Belt drive b type . 1. Driven by half HP motor. 2. Different size of pulley mounted in two shafts to find belt slip 3. Belt size A40 and B42 . All are mounted in rigid MS frame

Hydraulic Press machine Hand operated hydraulic press of 4 to 10 tons , Ram travel 100 – 300 mm.

Sliding mesh gear box for dismantling and assembling Light duty sliding mesh gear box for dismantling and assembling (able to learn gear tooth wear, gear mesh, crank damage) brand new gear box not required. Should be fitted in MS frame.

Constant mesh gear box cut section Cut section Light duty constant mesh gear box for learning purpose of gear tooth wear, gear mesh, crank damage) fitted in MS Frame .

Test mandrels for lathe and drilling machine Standard size. (for above lathe and drilling machine) Also used to check the true running of taper socket

Precision Straight edge High quality alloy steel / grained cast iron material . Length 1000 mm or more 100 mm length , 30 to 40 mm width

Spirit level FREEMANS Box section Aluminum spirit level with magnetic mounting .

Magnetic stand with dial indicator Branded Mechanical Dial indicator mounted in universal magnetic mounting.