PROVN HARD STANDING PLATFORM AT P45 OFFRS MESS GEYSER 04 NOS OF CAPACITY 25 40 LTRS INCL NECESSARY FITTINGS IN OTM ACCN FOR 32 BIHAR NCC SPECIAL REPAIR TO BUILDING NO P11 OF 32 BIHAR BN NCC AND ADDITION ALTERATON CUM SPECIAL REPAIR REPLACEMENT OF SEC

Amount

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for old size brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L reinforced cement concrete1:1.5:3 type A1 using 20mm grared stone aggregate as in beams, cantilevers, bressummers, Lintels over 1.5 m clear span etc. complete

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

S&F MS TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto above Item No 6.00 but 6 mm to 8 mm dia and complete all as directed by EIC.

M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .

M&L 5mm thick Rendring on fair faces of brick/concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified & directed .

Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.

Roughening surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. complete all as specified & directed

M&L 10 mm thick screed bed mixed with water proofing compound at 200ml/per beg of cement on roof surfaces/concrete surface in CM 1:4 complete all as specified as directed. Note : WPC shall be measured separately under appropriate item

M&L for PCC 1:2:4 type B-0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/ sunken slab etc complete all as spd and directed,

M&L brushing neat cement slurry with 3 kg of cement per square metre complete all as specified as directed.

M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying two coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall or concrete and applying 3 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for prepartion new plastered surface of wall and applying two coat of cement base paint over a coat primer complete all as specified & directed.

M&L for applying 3mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on old plastered wall surface complete all as specified and directed.

M&L for applying 3mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on old surface of ceiling complete all as directed by EIC

M&L for applying two coats of cement base paint on old wall surfaces including preperation of surfaces etc complete as all specified.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete.

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete.

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.

M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick (digital type) on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.

S & F of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 20 mm thick in CM 1:6 cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over 15 mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

M&L False ceiling of armstrong with aluminium laminated coating on reverse side, sound absorbing of size 60 x 60 cms, 4 mm thick arm gyp coloured with perfroations supported on mild steel powder coated snap grid frame work with suppporting hangees comprising GI wire 4 mm dia with size of grid 605 x 605 mm consisting of main and cross tee complete all as per manufacturer instructions and as directed y Engr - in-Charge. Make:- Armstrong or equivalent make ISI marked.

M&L for wall lining of PVC hollow sheet 5-7 mm thick consisting of 20 mm MS hollow square tubes grid and fixed with screws complete all as directed. Make-Syntex/Rajshree

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on the wall to make PVC frame as per specification.

S & F for steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good the same in cement concrete 1:2:4 type B-0 or cement mortar 1:3 as required, superficial area of cutting not exc. 150 Sqcm complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

All as per above item No 42.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and directed.

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

S & F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long ) complete (with glazing bars) dovetailed or welded complete all as specified and as directed.

~Ditto~ all as per item No 45.00 above but without glazing bars complete as specified and as directed.

S & F for Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I all as specified and directed.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S & F pressed steel frame of size 125mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specifed and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter & kitchen cupboard shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) complete all as specified and directed.

S& F in repair 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.

M & L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) as in back filling of pressed steel frames and similar works inclduing necessry form work as required complete all as specified and directed.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete as directed by Engr-in-charge

S & F for 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed..

S&F for 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete.

S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed.

S&F in repair brass CP tubular towel rail 20 mm dia "D" type 60 cm long between flangecomplete all as specified and directed

S&F sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever MS brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S & F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900x750x220 mm size fixing with wooden plug with suitable size of screws complete all as specifiedand directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

Taking up or down steel tubing and connections 15 mm bore GI tubing complete all as specifed and directed.

Taking up or down steel tubing and connections 20 mm bore GI tubing complete all as specifed and directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

S&F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed

M&L for Two coats of elastomeric cementatious coating Pidifin 2k of pidilite or equivalent in fosroc, sika, STP on exposed brick surface after complete removal of old plaster surface complete all as per manufacturer instructions and as directed.

M&L old size brick work with sub class 'B' bricks laid flate in floors laid in dry complete.

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in floor finished even & fair complete all as specified and directed.

M&L for 55mm thick PCC 1:2:4 type C2 (using 20mm graded stone aggregate), as in floor finished even & fair complete all as specified and directed.

M&L Rubber moulded coloured chequered tile 20 cm x 20 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry in floors ( with grey cement and pigments) including Screed bed or bedding of mortar (CM 1:6) 20 mm thick for laying floor finishes.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in coping includig form work complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate), as in foundation, filling and mass concreting finished even and fair complete all as specified and directed.

M&L for sand filling under floors or in foundations, laid in layers n. exc 15 cm thick, spread levelled including watering and consolidation complete all as specified and directed.

M&L for providing 100 mm thick cement concrete1:2:4 type B1 (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to confirm to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.

Supply and fixing 3 mm thick and 38 mm wide Glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed.

Supply and fix Water heater storage type, electric,capacity 25 litres vertical mounting BEE 5 star rated all as specified and as directed.

S & F PVC connections 15 mm size with PTMT pipe with nuts of 450 mm length for hot and cold water supply complete all as specified and as directed.

Supply and fixing of Tee for CPVC pipe 20 mm outer dia complete all as specified and as directed.

Supply and fixing of elbow for CPVC pipe 20 mm outer dia complete all as specified and as directed.

Supply and fix angular stop cock, brass chromium plated, screwed down for size 15 mm (1/2”) dia pipe including all connected fittings complete all as specified and as directed.

M&L for point wiring with 4.0 qmm cable copper conductor multi stranded for 3 pin 15 Amps socket outlet on independent board,including 4.0 sqmm copper conductor PVC insulated sheathed continuous earth wire and connecting to common earth dolly FRLS sheathed 1100 Volts grade copper multi stranded conductor drawn through and including rigid PVC conduit 20 mm dia concealed in walls ,roofs, including chese cutting and making good of wall surface by using putty and wall paint complete all as specified and as directed.Note : 2 X 4.0 sqmm for phase and nutarl and 1 X 4.0 sqmm for earth run and PVC conduit measured in one unit.

S & F Switch socket combination flush type 5A/16A, 5 in 1 flush type including all fitting and chese cutting and making good of wall surface complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls as directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for following point wiring controlled by one switch complete all as specified and directed.

One light point/fan point/ bell point controlled by one switch.

One three pin socket outlet 5 Amps on same board complete.

One 5 Amps socket out let point on independent board controlled by one switch.

All as per item no - 106 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fix switch piano flush button single pole one way 5 amps, 230 Volts complete as directed.

Supply and fix socket outlet flush type 5 Amps, 5 pin, 230 Volts complete as directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.

Supply and fix Ceiling rose surface bakelite 63.5mm dia three terminal, fixied in repairs complete.

Supply & fixing for electronic Fan regulator 450 watt .

Supply and fixing batten / angular fittings complete all as spd & directed.

Supply and fixing of 9 watt LED bulb complete all as spd & directed

Supply and fixing LED tube rod 18 Watt including fitting with rod 18 watt 230 volt T 8 type made up of polycarbonate with in built electric electronic drver both sided connection with metal heat sink complete fixed with wall/ceiling incl fitting accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed. Make- Havells, Cat No CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bjaj/philips/Crompton/Eveready/Bentac.

M & L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Juction boxes, elbows saddles. Pipe hooks, couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces complete all as specified and directed.

S&F LED tube light batten box type with decorative end caps suitable single tube 1 x 18/20 watt T8 lamps type complete with both end bi-pin holder tube rod 1x18/20 watt (LED) and all accessories internally prewired and fixed to wall/ceiling incl fitting accessories and connectiong with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make - Crompton Greaves ,Model No : DMLN1LT8-16 or equivalent model of Bajaj/Surya/Havells/Bentac/Eveready

Supply and fix double door SPN DBs 8 way, 240 volt with 200 Amp rated bus bar SPN of powder coated DB's suitable for housing MCB's/Isolater, Neutral link, Earth bar and Din ral complete.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

S&F in repair with MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete. Make-Havells / Indo Asian / ABB.

S & F in repair with MCB SPN 5 to 40 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete . Make-Havells/ Indo Asian / ABB.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 16 Sqmm 4 core.

All as per ser item No 123 above but of cross sectional area 25 sqmm 4 core

Supply and erecting steel tubular pole, swaged with swan neck complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-31 (9 meter long) complete, Including disconnecting all as directed. Note Excavation & Earth work and PCC foundation/base shall be measured and paid separately under relevant items of this BoQ.

Supply and fix LED street light 75 Watt IP 65 including all fittings all as specified and as directed.

Supply and fix FRP street Light Pole Box, Size - 300 x 200 x 125 mm,with DIN Rail for MCB including all fittings all as specified and as directed.

M&L for sub main wiring with two runs of 1.5 sqmm (Nominal area) single core PVC insulated stranded unsheathed copper conductor FRLS cable upto and including 1100 V grade drawn through PVC rigid conduit medium grade fixed to pole including one run of 1.5 sqmm (nominal area) single core, PVC insulated stranded unsheathed copper conductor FRLS cable as earth wire and duly connected to common earth point all as specified and directed including taking out old cables. (Note :-(i) One run of PVC rigid conduit with all fittings/accessories and Two runs of 1.5 sqmm single core cable and one run of 1.5 sqmm earth continuity wire to be measured as one length).

Supply ,fabrication, installation and testing of LT out door type factory made CPRI Approved ,feeder piller box of made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5mm vertical legs frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming existing cable of any size drawing / digging out cable from loops in trenches inclusive of necessary excavation and earthwork as required and relaying the cables including the following fitment accessories all complete as specified and as directed.

Outgoing (a) MCB Single Pole 5 to 32 Amps,240 volts, 10 KA breaking capacity C curve - 03 Nos. (b) TPN MCB four Pole 16 to 32 Amps,240 volts, 10 KA breaking capacity C curve - 01 Nos. (c) Analog type time Switch, three moduled, 240 volts AC- 01 No (d) Power contractor 32 amps 3 Pole 415 Volts AC - 01 No. (e) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

S&F in repair of Earthing to panel with galvanised steel earth plate electrode 600mm X 600 mm X6mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 of MES Shedule pt 2009 GI earth lead strip protected by GI pipe 40mm dia light grade and connected and connected to earth test point including excavation in any type of soil , returning filling , disposal of soil , providing charcoal dust and common salt upto top edge of earth plate , construction of PCC pit with RCC cover , funnel ,watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

M/s Mukesh and company

M/S ANAND MOHAN ENTERPRISES

M/s Naresh Chand Agrawal

M/S ENDEAVOUR ENTERPRISES

J K CONSTRUCTION

M/S PRAVIN ENTERPRISES

M/S Priya Trading Agency

M/S SAROJ KUMAR SINGH

Vijay Bakshi and Son

jaglalchoudharyandsons