8276 REPAIRS TO COMPOUND WALL, FENCING, GATES, DRAINS, PATH AND HARDSTANDING AT CHSC, CMDC, MINTSD, ALC, EME, POWD, WR STN AND MD ACCN UNDER AGE BR II SOUTH PUNE

Amount

Demolition of cement concrete in ground floors paving not exc 15 cm thickness below or above Ground Level, complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

Excavating in trenches not exceed 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shafts, wells cess pita, man holes pier holes etc not exceed 10 Sqm on plan and not excced 1.5 mtr in depth and getting out in soft / loose soil complete all as specified and directed

Returning , filling in , including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated surplus soil of any type to a distance not exc. 50m and depositing where directed at a level not exc. 1.50m above the starting point, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L TMT bars,10mm dia & over , cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT bars,8mm dia & over , cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L RCC type B1 -1:2:4 (20 mm graded stone aggregate) in foundation ,including rafts, footing, foundation beams, plinth beam bases for columns,etc basement slabs under reamed piles and mass concrete complete all as specified & directed

M&L for RCC type B-1 1:2:4 (20mm graded stone aggregate) as in columns, piers, posts and struts complete all as specified and as directed.

M&L for RCC type B-1 1:2:4 (20mm graded stone aggregate) as in beams, cantilivers, bressumers, lintels over 1.5 mtr span complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in drain cover with plain faces, setting in cement mortar 1:6 complete all as specified and directed.

Formwork to sides of concrete foundation, footing, bases of columns, rafts and raft beams ,sides and soffits (if any) of foundation and plinth beams and similar work vertical or to better complete all as specified and directed.

Form work to sides and soffits of floor or roof beams beam haunching, girders ,bresummers, lintels, cantilevers , shelves including supports,overhangs etc also splays between floors and beams etc complete all as specified & directed

Form work to sides of pillars ,posts ,struts,piers columns and stanchion rough finished surface of concrete flats all as specified & directed.

M&L for fixing broken glass coping on walls in CM 1:3 including taking and removing rubbish complete all as specified and directed.

M&L for providing cement concrete Type B-0 (1:2:4) (12.5mm graded aggregate) as in copings, bed plates, bed block & hold fasts etc completing all as specified and as directed

M&L for providing precast cement concrete Louvers and Jallies 25 mm thick including all Mouldings of typeB0 1:2:4 Using 12.5 mm Graded Aggregates set in cement mortor 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc any description complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC @ 3 % by weight of cement,complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and as directed.

M&L for Two coats of cement base paint on wall over one coat of Primer of plaster including preparation of wall new surfaces complete all as specified & directed.

Dismantiling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and as directed.

S&F framed work such as grills, gratings etc with end of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to fe 410 Gde E-250 Quality 'A' complete all as specified and as directed.

Dismantling Post or struts (wood ,steel,RCC) embedded in natural ground any section, including taking out embaded portion and making good disturbed ground complete all as specified and directed.

Excavating in Post Holes (or Similar Holes) Each not exc. 0.50 Cum, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 25cm Watering and Removing surplus Spoil to a distance not exc. 50.00 mtr and making good Surfaces in Soft/Loose Soil, complete all as specified and as directed.

Dismantiling fencing wire mesh of any type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply only Chain Link Fencing 50X50mm Mesh or Cages with 3.15mm dia Mild Steel Galvanised Wire lapped, Straining and Binding with including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

Fixing only Chain Link Fencing 50X50mm Mesh or Cages with 3.15mm dia Mild Steel Galvanised Wire lapped, Straining and Binding including Mild Steel Wire straing bolts etc , complete all as specified and as directed.

M&L for Mild Steel Work such as Flat Iron Fillets for securing Wire Mesh, Straps, Ties, etc. and similar Work, fabrication from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed.

M&L for Mild Steel Framed Work as Fencing Post, Gate,Grills, Grating, etc. with ends of Bar shouldered and/or riveted or forged into Spikes, Framed Guard Bars and Similar Work, etc. conforming to Fe-410-0 or Fe-310-0 including all necessary drilling, bolting or riveting, etc., complete all as specified and as directed.

M&L for mild steel round bars,10mm dia & over Fe-410-W (Gde E-250),as in stiffners for chain link fencing complete all as specified and directed.

M&L for Mild Steel Screw Bolts (Machine Made) with Hexagonal Head at one End and screwed the other Ends, each screwed End to be fitted with Washers and One Hexagonal Nut, diameter of Shank 5 to 10mm Length of Bolt exc. 100mm but not exc. 150mm, complete all as specified and as directed.

Dismantling Plain or Corrugated steel sheeting , any gauge , thickness, incl Nainital or similar pattern roof covering complete all as specified and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick 150 GSM of aprroved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified in roof, wall etc complete all as specified and as directed.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts ,including ,securing or trying at crossing with end provision of galvanised mild steel wire staple or steel pins,etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush and applying one coat of cement base paint on existing tint complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in surface channel & drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested in 150mm bore of pipe, complete all as specified and directed.

S&F PVC SWR Pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors /in earth of 110mm bore complete all as specified and as directed.

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc. complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base 75mm thick complete all as specified and as directed.

M&L for PCC 1:3:6 Type C-2 using (40mm graded stone aggregate ) 75mm thick finished even and smooth without using extra cement as in plinth protection, PCC path complete all as specified and as directed.

M&L for Cement Concrete 1:2:4 (40mm Graded Stone Aggregate) 100mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and Smooth without using extra Cement, complete all as specified and as directed.

M&L for precast cement concrete coloured glazed interlocking tiles 60mm thick in floor/pavement laid over 25mm thick stone dust/sand cushioning laid dry to the profile complete all as specified and as directed.

M&L for Coloured chequerred cement concrete glazed tiles of size 30cmx30cmx22mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Labour only for full round moulding 18 to 20mm thick granite slab complete all as specified and as directed.

Raj Construction Company

SARATH ENTERPRISES

Gauri Associates

p k enterprises

M/s Omkar Associates

S. A. Yadav

DHANESH PRAVIN GANDHI

Takshashila electricals

MANISH VEDPRAKASH ARORA

Galaxy Construction