(LINE 09) WARD NO- 09 ME SUKHVEER SINGH KE GHAR SE JITENDRA KE GHAR TAK INTERLOCKING KARYE AUR BRICKS NAALI NIRMAN KARYE.

Site Clearence, Material shifting by Labour including all labour , T&P etc complete. DSR code No-0114 (Rate=645.0*0.749=483.10/day)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR Item No-2.25(a)( Rate=700.50*0.749=524.67/cum)

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR Code - 4.1.10 Rate - 6518.60x0.749 = 4882.431/cum

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR ITEM No-6.1.1 (Rate =7370.65*0.749=5520.62/cum)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR code No-13.4.1 (Rate=357.35*0.749=267.66/Sqm)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DRS Item No -5.2.2 (Rate=10852.95*0.749=8128.86/Cum)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(Thermo-Mechanically Treated bars of grade Fe-500D or more) .DSR Item No-5.22.6 (Rate=107.10*0.749=80.22/Kg)

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power rollerto achieve the desired density, complete as per specifications and directions of Engineerin- Charge With material conforming to Grade-Il (size range 53 mm to 0.075 mm ) having CBR Value-25.I.S.16.78.2. Rate = (2924.85x0.735 = 2149.765 rupee

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR-2023 code-16.91.2 Rate=1091.50x0.749=817.53/Sqm

Supply & Fixing inaguration stone/ information board in piar of brick work complete in all respect.