White Washing , Distempering, Acrylic Painting and Minor Repair In Office Building At 3- Sham Nath Marg Delhi 110054

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. HSR Item No. 30.21

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete HSR Item No. 30.22

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. HSR Item No. 11.60

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work HSR Item No. 30.27.1

Finishing walls with Acrylic Smooth exterior paint of required shade: HSR Item No. 30.37.2

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. HSR Item No. 30.28.1

Rubbing Polishing of Kota Stone at office Complex (NS items

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately). HSR Item No. 12.1.3

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISi marked M.S. pressed butthinges bright finished of required size with necessary screws etc. HSR Item No. 12.7.3.1

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within 50 metres lead: Of area beyond 3 sq. metres HSR Item No. 5.29.2

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Old work (Two or more coats applied @ 1.43 litre/ 10 sqm) over existing cement paint surface HSR Item No. 30.38.1

Water proofing of roof terraces, Basements, Retaining Walls, Water tanks etc with Zydex Zycoprime / Elastobar / Equivalent solution so as to form a waterresistant cementitious bonding coat and to form on-site seamless crosslinked elastomeric membrane on the concrete surface to reduce its porosity.Creating a cementitious elastomeric polymeric membrane of 2 coats of Elastobar and Zycoprime/Equivalent after application of Zycosil & Zycoprime Solution in New Construction. Take equal parts of Elastobar and Cement and form a paste. Add little water to the paste to make it brush able. Apply the paste on surface with brush. Leave the surface for drying for at least 4 - 6 hours to get elastomeric membrane. After this application, make one more layer of rough cementitious membrane using mixture of 1 Part of Zycoprime +1 Part of Cement + 1 Part of fine sand. Apply paste on the surface with a brush to make a rough texture. Now your surface is ready to bond well with tiles/screed.HSR Item No. 28.39

Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level.Cement mortar 1:3 (1 cement :3 coarse sand) HSR Item No. 7.28.2

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) HSR No. 11.5.3

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm sqm 196 571 767 or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR No. 10.60

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : sqm 235 368 603 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR No. 10.58

White vitreous chinaware Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap HSR No. 22.1.17

Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required- Single half stall urinal with manually operated5 litre P.V.C. flushing cistern and manually operated stop cock/ angle valve HSR No. 22.26.2

Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required -W.C. pan with ISi marked white solid plastic seat and lid HSR Item No. 22.23.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.- 100 mm nominal inner dia Pipes HSR No. 22.87.9

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) HSR Item No. 12.157.1.2

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) -Powder coated aluminium (minimum thickness of kg powder coating 50 micron) HSR No. 12.157.2.2

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge : Pre-laminated particle board with decorative lamination on one sqm side and balancing lamination on other side HSR No. 12.158.1

The Alpha Co-Operative Labour & Construction Society Ltd.