Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC B 68 MOTIKUNJ MATHURA 281001 UP | MATHURA | UTTAR PRADESH | 281001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹30.3 L+₹1.7 L (6.01%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹30.4 L+₹1.8 L (6.34%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹32.8 L+₹4.2 L (14.6%)Rejected-Finance D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹33.4 L+₹4.8 L (16.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹38.6 L
EMD Value
₹77,300
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Mathura
HQ CWE Mathura
As per tender document
2023_MES_633150_1
CWE/MTR/E of 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (E) Mathura
As per NIT document
7 documents required · 7 mandatory
₹500
GE (E) Mathrua
₹77,300
Yes
6 Feb 2024
16 Dec 2023
19 Jan 2024
16 Dec 2023
12 Jan 2024
30 Dec 2023
Amount
Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
Applying evenly a priming/ tack coat with bituminous primer paving bitumen VG-10 @ 5 kg per 10 sqm complete all as specified and directed.
M&L for bituminous semi dense asphaltic concrete 30 mm consolidate thickness with 5.5.% binder content paving bitumen VG-30 by weight of total mix and OPC-43 grade using as filter material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed. Note for item No 3:- (i) Bituminous concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver finisher . (ii) Filler for bituminous concrete shall be OPC-43 grade @2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any negative variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ Rs. 40.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said item. (iv) Work shall be executed as per design mix approved by GE.
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sq m and exc 50 mm and n.exc 100 mm deep complete all as specified and directed.
M&L for applying evenly a priming/tack coat with bituminous primer (using paving bitumen) at 10Kg per 10 Sqm complete all as specified and directed.
M&L for premix bituminous, macadam using with paving bitumen of VG-30 grade of consolidated thickness 75mm or less with 4% binder content by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed.
Repairs to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depth making good by filling in screened and graded road materials over a well ramming including supply of road metal by applying evenly a priming / tack coat with bituminous primer VG -10 at 10 Kg per 10 Sqm, cutting in semi dense asphaltic concrete 30 mm thick rolled and compacted with 8 to 10 tonne power roller complete all as specified and directed.
M&L for thermoplastic reflective paint of white or yellow colour on existing black top/ concrete surfaces for centre non-continuous strip and continuous side strip of 100 mm wide and 3 mm thick including preparation of surfaces etc complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below ground level) complete all as specified and removing all debris outside of MOD land.
M&L for sand cushioning 25 mm thick spread and levelled over sub base complete all as specified and directed.
M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block with rubber mould type any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade of concrete as in floors/ pavements and design with grey cement and pigment bases, complete all as specified and as directed.
Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, n exc 100 mm in width & set in CM 1:4 complete all as specified and directed.
S&F in repairs Road studs / cat eyes Two way Reflective panel Amber or Red. Plastic body size 100x100x20mm to give the maximum reflection which enhnaces the visibility of the vehicles during dark and bad light conditions complete all as specified and directed.
S&F in repairs solar road studs aluminium alloy shell & polycarbonate facing size 125 x 125x 25 mm (Shank 60 mm), with six super bright LEDs for viewing distance upto 1000m, including Ni-cd rechargeable battery (1.2 V/1600MA) for continual performance, Colour of LED Red, Yellow or white, (as approved) complete fixing as per manufacturers instruction complete all as specified and directed .
S&F in repair convex mirror 800 mm dia made up of polycarbonate reflective mirrors, outdoor use with hood and complete with mounting hardware for upto a height of 1500 mm, above GL and 45 cm below the GL with medium grade MS pipe 50 mm dia including two coats of anticorrosive paint over a coat of red oxide primer body made of ABS embedded in PCC (1:2:4) type B-1 of block size 30x30x45cm including PCC (1:3:6) type C-1 in foundation and necessary excavation in post hole complete all as specified and directed
S&F in repairs speed hump 50mm height made of strudy plastic high resistance, re coloured (Black and yellow) bottom of bumps to be filled with cement conc 1:1.5:3 and curved bump studded with reflceters on either sides copmlete (350 x 250mm ) size fixed with epoxy and bolts by drilling 6mm x 75mm dia fasteners as per manufacturer instruction complete all as specified and directed.
Supply fabrication and erection of mandatory / warning sign board of shape equilateral triangle (of size 600 mm) / Octagonal ,Circular confirming to IRC: 67 -2012 standard, fabricated with 3 mm thick aluminium composite panel in non metallic colour of approved shades consisting of 2 mm thick mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, with degreasing treatment & fine grinding on front side for proper pasting of Reflective sheet, Supply & pasting self adhesive retro reflective sheet with Micro prismatic Lens (diamond grade / OMNI grade Type VIII & IX), High intensity paste over ACB (one side) ..as base and with cut out massage / symbol (Right curve / left curve / Horn / speed limit / stop / look / go / No overtaking / round about/ drive slow etc including borders, letters, numerals etc IRC : 67 -2012 standard) with retro reflective sheeting (as mention hereinbefore of different colour), pasting as per manufacturers instruction., complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed.
M&L for cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Taking down / demolition of complete sign board of any description from ground including dismantling of post imbedded in the PCC complete all as specified and directed.
KRISHAN KUMAR GOVT CONTRACTOR
R N AGRAWAL
Matrubhoomi Construction
Tarun Builders
M/s M S Sharma and Co.
M/s RCC
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .