Tender for Improvement works to the Medical and Surgical Blocks of Chennai Port Authority Hospital

Schedule A1- Civil works -Medical Block

8. Dismantling and removing the existing worn-out wooden/PVC doors etc., including frame with shutters in all floors without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. a). Area Less than 3 M2

B). Area More than 3 M2

b). Area More than 3 M2

c). Ventilators Area Less than 3 M2

3. Dismantling and removing the existing damaged brick work in cement mortar by manually/mechanical means wherever required without damaging the nearby structures including collecting and bringing down down the debris to the ground level and depositing the debris within a lead of 50m for disposing all as specified and as directed at site, including all labour, tools, tackles, equipments, fuel, scaffolding, etc., complete.

14. Dismantling the existing Brick jelly lime concrete in sunken portion of toilet area wherever required without damaging the nearby structures to the required level, size and shape and making good the disturbed portions if any, including collecting and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as per relevant specification and as directed at site, including all labour, tools, equipment, transport, fuel, etc., complete.

l). PTMT 32mm bottle trap- PTMT

18. Chipping thoroughly the existing damaged plastering from walls to receive new finish wherever required without damaging the nearby structures including conveying the debris to the ground level and depositing within a lead of 50m for disposal all as directed including all labour, tools, equipments, scaffolding etc., complete.

13. Dismantling the existing wall tile dadooing including base mortar to the required thickness from the walls and wherever required to receive new finish including collecting and depositing the debris to the ground level within a lead of 50m all as directed including all labour, tools, equipments, etc., complete.

12. Dismantling and removing the existing damaged floor plastering/floor tiles/mosaic/ Cuddappah stone in Cement Mortar to the required thickness wherever required without damaging the structures nearby, including collecting and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as directed at site of work, including all labour, tools, equipments, transport, fuel, etc., complete

n). PVC connection for Kohinoor Brand with Nylon thread Hot water line

10. Dismantling and removing the existing Gypsum board / hard board / thermocole false ceiling with frames, clamps etc., without damaging the adjoining structures, transporting and handing over the unserviceable materials to departmental stores/ RSD yard and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as directed including all labour, tools, equipment, scaffolding, transport, fuel, etc., complete.

57. Supplying and fixing of Anodized Aluminium fittings for doors, cup-boards, etc., (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) with necessary screws, all as directed at site of work including all materials, labour, tools, equipments, etc. complete a). Tower bolt (barrel type) 200x10 mm

58. Supplying and fixing of brass fittings for doors etc., with necessary screws, etc as directed at site of work including all materials, labour, tools, equipments, etc. complete a). Door Stopper with rubber bush (Heavy) with CP brass screw

4. Dismantling and removing the existing IWC / EWC with tank, W.C.Pan from Toilet without disturbing the existing structure near by including collecting and depositing the debris within a lead of 50m all as directed including all labour, tools, equipments, etc., complete.

6. Removing the existing damaged Urinal with all accessories without disturbing the near by structure and handing over the serviceable materials, if any, to the department stores and bringing down the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete.

29. Dismantling of Gully trap including chamber wherever required without damaging the structures nearby and collecting, stacking the debris within a lead of 50m for disposal all as directed at site of work including costs of all labour, tools, equipments, etc., complete.

m). PVC connection for wash basin and flush tank -600mm length

26. Providing and fixing granite slab of 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of colour black, Cherry/Ruby red approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 CS sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels including all materials, labour, tools, equipments, curing etc., complete.

e). Door handle100mm long with plate 150x32mm

b). Bright finished Brass butt hinges 125mm

37. Providing and fixing IS : 12817 marked stainless steel fittings (heavy weight) with stainless steel screws for doors, etc., as directed at site of work with the approval of engineer in charge, including all materials, labour, tools, equipments, etc. complete a) Butt Hinges 125mm

b) Tower bolt 150 mm

c) Tower bolt 75mm

d) Aldrop 250mm

27. Preparing the surfaces of old wooden members and applying two coats of synthatic enamel paint (Asian / Nippon / Berger or equivalent) of approved brand and colour of good quality to give an even shade all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per Ch.P.A. engineering manual. 2. The above quantity is inclusive of painting co-efficient.

c). Bright finished Brass butt hinges 100mm

e). Bright finished Brass handles 125 mm with plate 175x32 mm

d). Bright finished Brass Tower bolts 150mm long

22. Providing and laying plain cement concrete of mix 1:4:8 (1cement :4 CS sand: 8 hard granite graded stone aggregate of 40mm nominal size) in volumetric proportion for levelling course wherever required including shuttering, mixing, transporting, placing, consolidation by ramming, curing et

17. Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm or nearest size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Crushed stone sand), jointing with grey cement slurry @ 3.3 kg/ sq.m , complete and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work including cement and all other materials, labour, tools, equpiments, etc., complete.

21. Refilling with available excavated earth excluding boulders, rubbish, debris, etc., wherever required in layers not exceeding 200 mm thick and as directed at site, including consolidating the deposited earth in layer by watering and ramming including all labour, tools, equipment, etc., complete

47. Providing, fixing and laying of pipes on floors of, approved quality rigid PVC pipes of 75/110mm outside diameters 6 Kgf/sq.cm pressure-(Finolex (or) Trubore (or) Varun (or) Supreme or equivalent) for waste water lines/sewage lines including necessary specials like bends, tees, elbows, clamps and specials, etc., wherever required, including joining the pipes using necessary adhesives, and making connections to floor traps, gully traps manholes etc., including cutting the floor concrete masonry and making good the disturbed portions all as directed at site of work including all materials, labour, tools, equipments, scaffolding, cement etc., complete. a). 110mm Dia

b). 75mm Dia

31. Earth work excavation upto 1.50m in ordinary soil, sand, clay mixed with roots, boulders weighing individually less thasn 250kg debris, rubbish etc., as existing at site of work for all foundations and other such works as directed including dressing of sides ramming of bottom all as per relevant specification and as directed at site, depositing the excavated earth within a lead of 50m for transportation including shoring, strutting, all labour, tools, tackles, equipments, fuel, etc., complete.

e) Angle valve 15mm dia

(b) Debris

33. Casting, transporting and placing RCC pre cast cover slabs 100 mm thick in mix 1:1.5:3 (1 cement : 1.5 CS sand : 3 hard granite stone graded aggregate of 20mm nominal size) in volumetric proportion including formwork, mixing, transporting, placing, consolidating, etc., including finishing the exposed surfaces with a floating coat of neat cement punning 2.2kg/sqm and as directed including necessary curing, handling, placing and fixing in position and all other materials, labour, tools, equipments etc., complete. Note: Supplying and fabrication of steel reinforcement will be measured and paid seprately under the relevant item.

52. Supplying diluting and injecting chemical emulsion for post constructional anti termite treatment with chlorpyrlphos Emulsifiable concentrate with 1% concentration (i.e. one litre of chemical for every 20 litires of emulsion) in soil along internal and external wall using chemical emulsion at 2.25 litire per linear metre inlcuding drilling and plugging holes etc. and treating the soil under floors, masonry / concrete inside and outside of buildings wherever required, using chemical emulsion at 1 litre per hole at 30cm interval including drilling 12mm dia holes and plugging them with cement mortar 1:2 to the full depth of the hole and treating the points of contact of wood work by chemical emulsion (in oil of kerosene based solution) at 0.5 litres per hole by drilling 6mm dia at downward angle of 45 degree at 150mm c/c and sealing the same and as directed including all material (including cement) labour, tools, scaffolding, ladder, equipments etc. complete

c., all as per relevant standards and specifications all as directed at site of work including cement, all materials, labour, tools, equipments, transport, fuel, etc., complete.

Schedule - A2 Civil Works -Surgical Block

20. Providing flooring with good quality Vitrified Tiles (Double Charge) of size 600mm x 600mm or of nearest size as available in the market of 10 mm Nominal thickness set in cement mortar 1:4 (1 cement : 4 clean fine CS sand) 20 mm average thick with required slope fixed with neat cement slurry,and joints neatly pointed with white cement added with pigment to match the colour of the tiles,curing all as directed including cement and all other materials labour,tools, equipments , etc., complete

36. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge and as directed at site of work including transporting, placing, all materials, labour, tools, plants, equipments, fuel, etc., complete. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

19. Providing and fixing wall Dadooing using 1st quality ceramic glazed tiles of size 300mm x 200mm or of nearest size as available in the market conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make and approved colour and shade set in cement mortar 1:3 (1cement: 3 fine CS sand), 12mm thick and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work including cement and all materials, labour, tools, equpiments, transport, fuel, etc., complete.

4. Dismantling and removing the existing worn-out wooden/ PVC doors/ windows/ ventilators etc., including frame with shutters in all floors without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. a). Area Less than 3 M2

b). Area More than 3 M2

38. Preparing the surfaces of existing ceiling etc., and applying one coat of white washing with premium acrylic emulsion paint of interior grade, (Asian / Nippon / Berger or equivalent) having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour all as directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safety belts, safety helmets, etc.,complete.

16. Providing and laying brick jelly cement concrete in mix 1:5:10 (1 cement :5 CS sand :10 broken brick aggregate of 40mm nominal size ) in volumetric proportions for sunken portions of the toilets to the required levels all as per relevant standards and specifications including mixing, transporting, placing, consolidating, curing etc., all as directed including cement and all other materials, labour, tools, equipments, etc., complete.

32. Providing and laying reinforced cement concrete of mix 1:1.5:3 (1 cement:1.5 CS sand:3 hard graded stone aggregate of 20mm nominal size) in volumetric proportions for Drain Side Walls and wherever required all as per relevant specification and as directed at site of work including cement, mixing, transporting, placing, vibrating,ramming, consolidating, curing, shuttering, all materials, labour, tools, plants, equipments, fuel, etc., complete.

43. Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm sizes or as available in the market (Parryware/Hindware/ jaquar or equivalent) as per manufacturers specification with PVC flexible flush pipe with clamp, teakwood plugs, screws with all fittings and fixtures for inlet and outlet arrangements etc., all as per relevant secification and as directed at site in sound working condition, including all materials, labour, tools, equipment, etc., complete.

53. Supplying, fabricating and fixing the M.S gate, window / Ventilator grill, Ladder as per existing or as directed at site using structrual steel, etc., using as verticles, horizontals and diagonal members, including fixing including cutting the flats, bars, etc., to the reqired length, welding the joints all as directed at site of work , providing scaffolding, fixing in proper alignment, all as directed at site of work including applying a priming coat of approved steel primer all materials, labour, tools, transport, equipments, fuel, etc., complete. Note: 1. The payment is based on the total weight of the MS flats, bars, etc., as fabricated. 2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment. etc., will be borne by the contractor.

1.Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen, including removing the scaffolding with platform after completion of works all as directed at site of work including all labour materials tools equipments transport fuel etc complete.. The elevational area of the scaffolding shall be measured for payment purpose. Note (1) 75% of payment may be relaeased after erecting of scaffolding in all respect. (2) The balance 25% of payment may be released after completion of improvement works and removal of scaffolding

40. Providing and fixing White vitreous china Orissa pattern W.C pan of size 580x 440 mm with integral type foot rest squatting pan (Indian Type WC Pan) Parryware/Hindware/ jaquar or equivalent with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, incluing flush pipe, with manually controlled device (Handle lever) conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, all as directed at site of work including all materials, labour, tools, equipments, etc., complete.

41. Providing and fixing white vitreous china pedastal type water closet ( European type W.C pan) Parryware/Hindware/ jaquar or equivalent with seat and lid , 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device(Hnadle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, all as directed at site of work including all materials, labour, tools, equipments, etc., complete.

42. Providing and fixing good quality vitreous white wash hand basin of size 550x 400 mm or nearest size as available in the market ( Parryware/Hindware/ jaquar or equivalent) with single 15mm C.P brass pillar tap. CP waste fitting , 32mm dia cp brass union, 15 mm dia PVC inlet connec

14. Dismantling and removing the existing wornout MS grill, MS gates, window grill, ventilators grill etc without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete.

tion, 32mm dia pvc waste pipe fittings, a pair of cast iron brackets etc as available in the market suitable for fixing the wash hand basin, including painting the brackets etc with two coats of synthetic enamel paint over one coat of primer fixing the brackets with teak wood plug and making good the disturbed portion, etc., all in sound working condition all as per relevant specification and as directed including all materials, labour, tools,equipments,etc., complete.

44. Dismantling and Removing the existing damaged PVC / Cast Iron / GI pipes with all accessories, wherever required without damaging near by structures including collecting and stacking the dismantled pipes within a lead of 50m for disposal , transporting and handing over the unserviceable materials to departmental stores/ RSD yard all as specified and as directed at site of work including all labour, tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety nets etc., complete.

17. Earth work excavation in ordinary soil, sand, clay mixed with roots, boulders weighing individually less than 250kg debris, rubbish etc., as existing at site of work for all foundations and other such works up to 1.50m depth including dressing of sides ramming of bottom all as per relevant specification and as directed at site, depositing the excavated earth within a lead of 50m for transportation including shoring, strutting, all labour, tools, tackles, equipments, fuel, etc., complete.

45. Removing the existing damaged taps, wall mixture, shower arm with shower rose, Health facuet, angle cock etc., with all accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete.

3. Dismantling and removing the existing wall plastering / tile dadoing including base mortar to the required thick from the walls wherever required to receive new finish including collecting and depositing the debris to the ground level within a lead of 50m all as directed including all labour, tools, equipments, transport, fuel, etc., complete.

48. Providing and fixing 110mm dia PVC Nahani trap (floor trap with gratings suitable for PVC drainage pipe) embedding the trap making the joints water tight etc., all as directed including all materials, labour, tools, equipments etc., complete.

51. Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen, including removing the scaffolding with platform after completion of works all as directed at site of work including all labour materials tools equipments transport fuel etc complete.. The elevational area of the scaffolding shall be measured for payment purpose. Note (1) 75% of payment may be relaeased after erecting of scaffolding in all respect. (2) The balance 25% of payment may be released after completion of improvement works and removal of scaffolding

2. Dismantling and removing the existing damaged floor plastering/floor tiles/mosaic/ Cuddappah stone in Cement Mortar to the required thick wherever required without damaging the structure nearby, including collecting and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as directed at site of work, including all labour, tools, equipments, transport, fuel, etc., complete

11. Dismantling the existing Plain cement concrete in Rich mix to the required level, size and shape wherever required without damaging the nearby structures if any, and depositing the debris within a lead of 50m for retransportation and disposal all as per relevant specification and all as directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete.

12. Dismantling the existing Plain cement concrete in lean mix to the required level, size and shape wherever required without damaging the nearby structures if any, and depositing the debris within a lead of 50m for retransportation and disposal all as per relevant specification and all as directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete.

5. Dismantling and removing the existing Gypsum board / thermocole false ceiling with frames, clamps etc., without damaging the adjoining structures, transporting and handing over the unserviceable materials to departmental stores/ RSD yard and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as directed including all labour, tools, equipment, scaffolding, transport, fuel, etc., complete.

13. Dismantling and removing the existing damaged brick work in cement mortar by manually/mechanically wherever required without damaging the nearby structures including collecting and bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposing all as specified and as directed at site, including all labour, tools, tackles, equipments, fuel, scaffolding, etc., complete.

15. Dismantling the existing Brick jelly lime concrete / Cement Concrete in sunken portion of toilet area wherever required without damaging the nearby structures to the required level, size and shape and making good the disturbed portions if any, including collecting and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as per relevant specification and as directed at site, including all labour, tools, equipment, transport, fuel, etc., complete.

16. Removing the existing damaged taps, wall mixture, shower arm with rose, Health facuet, angle cock, towel rod, etc., with all accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores /RSD, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete.

18. Refilling with available excavated earth excluding boulders, rubbish, debris, etc., wherever required in layers not exceeding 200 mm thick and as directed at site, including consolidating the deposited earth in layer by watering and ramming including all labour, tools, equipment, etc., complete

21. Providing Half brick work with common burnt clay (non-modular) bricks of class designation 7.5 set in cement mortar 1:4 (1 Cement: 4 CS sand) in toilet / bathroom / partition in ground level upto fifth floor level and wherever necessary, all as directed at site of work, including scaffolding, labour, materials, Cement, tools, curing, etc., complete.

6. Dismantling and Removing the existing damaged PVC / Cast Iron / GI pipes with all accessories, wherever required without damaging near by structures and handing over the unserviceable materials to departmental stores / RSD yard including collecting and stacking the dismantled pipes within a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety nets etc., complete.

22. Providing Brick pillaster with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:4 (1 cement : 4 CS sand) wherever required, all as directed at site of work including cost of cement , all materials, labour, tools, equipments, scaffolding, curing, transport, fuel, etc., complete

23. Casting, transporting and placing RCC pre cast cover slabs of various thickness more than 40 mm thick in mix 1:1.5:3 (1 cement : 1.5 CS sand : 3 hard granite stone graded aggregate of 20mm nominal size) in volumetric proportion including formwork, mixing, transporting, placing, consolidating, etc., including finishing the exposed surfaces and as directed including necessary form work, curing, handling, placing and fixing in position with CM 1:3 (one cement : three fine CS sand) including cost of cement and all other materials, labour, tools, equipments etc., complete. Note: Supplying and fabrication of steel reinforcement will be measured and paid seprately under the relevant item.

24. Providing and laying plain cement concrete of mix 1:1.5:3 (1 cement:1.5 CS sand:3 hard graded stone aggregate of 20mm nominal size) in volumetric proportions wherever required all as per relevant specification and as directed at site of work including mixing, transporting, placing, vibrating, ramming, consolidating, curing, shuttering, including cost of cement all materials, labour, tools, plants, equipments, fuel, etc., complete.

25. Providing and laying plain cement concrete of mix 1:2:4 (1 cement: 2 CS sand:4 hard graded stone aggregate of 20mm nominal size) in volumetric proportions wherever required all as per relevant specification and as directed at site of work including mixing, transporting, placing, vibrating, ramming, consolidating, curing, shuttering, including cost of cement, all materials, labour, tools, plants, equipments, fuel, etc., complete.

28. Preparing the surfaces of the floor area wherever required and plastering with C.M 1:3 (1cement: 3

fine CS sand) 20mm thick all as per relevant specifications and all as directed at site of work including, curing, cost of cement, all materials, labour, tools, equipments, transport, fuel, etc., complete.

29. Preparing the surfaces of the floor area wherever required and plastering with C.M 1:3 (1cement: 3 fine CS sand) 20mm thick with water proofing compound of integral water proofing liquid admixture conplast ( 160ml / 50kg of cement) all as per relevant specifications and all as directed at site of work including, curing, cost of cement, all materials, labour, tools, equipments, transport, fuel, etc., complete.

30. Preparing the surfaces of walls and plastering in cement mortar 1:5 (1 cement : 5 fine CS sand), 12mm thick to the required finish all as directed at site of work, including cost of cement and other materials, labour, tools, equipments, scaffolding, curing etc., complete.

31. Preparing the surfaces of ceiling and plastering in cement mortar 1:3 (1cement : 3 clean fine CS sand) 6 - 10 mm thick to the required finish, all as directed at site of work including all labour, cement, materials, tools, equipments, scaffolding, curing, etc. complete.

32. Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm or nearest size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 CS sand), jointing with grey cement slurry @ 3.3 kg/ sq.m , complete and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work including cement and all other materials, labour, tools, equpiments, etc., complete.

59. Supplying and fixing of Heavy Duty Stainless steel fittings for doors, etc., with necessary screws, etc as directed at site of work including all materials, labour, tools, equipments, etc. complete a). Butt hinges - 125mm.

48. Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm sizes available in the market as per manufacturers specification with PVC flexible flush pipe with clamp, teakwood plugs, screws with necessary fittings and fixtures for inlet and outlet arrangements etc., all as per relevant secification and as directed at site in sound working condition, including all materials, labour, tools, equipment, etc., complete.

34. Providing and laying Vitrified Tile flooring (Double Charge) of size 600mm x 600mm or nearest size with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 CS sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and pigments to match the colour of the tiles, all as directed including cost of cement and all other materials, labour,tools, equipments, curing etc., complete

35. Providing and fixing granite slab of 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for cupboard, shelves, racks and similar locations of required size of colour black, Cherry/Ruby red approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 CS sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges, etc. complete at all levels including all materials, labour, tools, equipments, curing etc., complete.

60. Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of weathering course roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application /system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, all as per relevant specification as directed including all materials, labour, tools, equipments, etc., complete.

36. Providing edge moulding to 18 mm thick granite stone for cupboard, shelves, racks and similar locations etc., including machine polishing to edge, etc., all as directed at site of work including all materials, labour, tools, equipments, curing etc., complete.

40. Providing and fixing of colour anodized aluminium main frame for doors and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e., at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all as per relevant specifications as directed at site of work including all materials, labour, tools, equipments, transport, fuel etc., complete.

41. Providing and fixing colour anodized aluminium sections for Shutter frames of doors and partitions with extruded built up standard tubular and other sections of approved make (INDAL or JINDAL or Equivalent make) with clear anodized aluminium coating (minimum anodized coating of Grade AC 15) conforming to IS 1868 including supplying and fixing necessary accessories like anodised aluminium cleat angles, snap on beadings (clips) for glazing / panelling, C.P. brass screws, anodised aluminium push plates 100mm wide both sides fixed with G.I. Bolts and nuts including necessary metal screws and concealed locking arrangements with woollen felt, filling the hollows of frames with wooden inserts of required length of approved quality wherever required to facilitate fixing of fittings all as shown in the drawing and as directed including all materials, labour, tools, equipments etc., complete.

b) 25mm dia

c) 20mm dia

7. Dismantling and removing the existing IWC / EWC with floor concrete from Toilet without disturbing the existing structure near by including collecting and depositing the debris within a lead of 50m all as directed including all labour, tools, equipments, etc., complete.

42. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all as directed including all materials, labour, tools, equipments etc., complete.

b). 75mm Dia (6 Kgf/sq.cm)

c). 110 mm Dia (4 Kgf/sq.cm)

d). 110 mm Dia (6 Kgf/sq.cm)

44. a). Supplying and fixing in position 5.5 mm thick plain glass (saint Gobain or Modiguard or equivalent) for doors / windows / partitions with necessary accessories like wooden beading/ Rubber beading, screw etc., all as directed at site including removing the old damaged glass, all materials, labour, tools, equipments, transport, fuel, etc., complete. Note: The actual area of glass used alone measured for payment purpose.

8. Removing the existing damaged Urinal with all accessories without disturbing near by structure and bringing down the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete.

c). C.P Brass Pillar cock 15mm dia

d). C.P Brass Short body tap 15mm dia

e). C.P Brass Stop cock 15mm dia (Concealed)

f). C.P Brass Angle valve 15mm

9. Removing the existing damaged wash hand basin with all accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores/ RSD yard and bringing down the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tool

s, equipments, transport, fuel, etc., complete.

19. Providing and laying plain cement concrete of mix 1:4:8 (1cement :4 Crushed stone sand: 8 hard granite graded stone aggregate of 40mm nominal size) in volumetric proportion for levelling course wherever required including shuttering, mixing, transporting, placing, consolidation by ramming, curing etc., all as directed at site of work including cost of cement, all materials, labour, tools, equipments, transport, fuel, etc., complete.

j). C.P Brass Shower rose

27. Supplying, fabricating and fixing the M.S gate, window / Ventilator grill, Ladder, etc., as per existing or as directed at site using suitable MS Square bars, MS Square sections, MS Flats, M.S.sheet, etc., using as verticles, horizontals and diagonal members, including cutting the flats, bars, etc., to the reqired length, welding the joints all as directed at site of work providing scaffolding, fixing gate in proper alignment including applying one coat of red oxide primer all as directed at site of work including all materials, labour, tools, transport, equipments, fuel, etc., complete. Note: 1. The payment is based on the total weight of the MS flats, bars, etc., as fabricated. 2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment. etc., will be borne by the contractor.

33. Providing and laying Ceramic glazed wall dadooing / skirting with tiles conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 CS sand), and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, all as directed at site of work including all materials, labour, tools, equpiments, scaffolding, curing, etc., complete.

53. Supplying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 20 mm dia, having thermal stability for hot & cold water supply (Trubore / Finolex or equivalent) for concealed works with CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., jointing of pipes & fittings with one step CPVC solvent cement and testing of joints and including punching the masonry/concrete wherever required and making good the disturbed portions, all as per relevant specification and directed at site of work, including cost of cement and all labour, tools, equipments, scaffolding etc., complete Note: Necessary Cutting of Brick work, Concrete, Plastering, etc., will be paid under relevant items of BOQ

Tender No: T/WMA3/40/2025/E

0). Stainless Steel Grating 100mm dia

44. b). Supplying and fixing in position 4 mm thick Frosted glass sheet (saint Gobain or Modiguard or equivalent) (weight not lessthan 10kg/sqm) for doors / windows / partitions with necessary accessories like wooden beading/ Rubber beading, screw etc., all as directed at site including removing the old damaged glass, all materials, labour, tools, equipments, transport, fuel, etc., complete. Note: The actual area of glass used alone measured for payment purpose.

45. Providing and laying brick jelly cement concrete in mix 1:5:10 (1 cement :5 CS sand :10 broken brick aggregate of 40mm nominal size ) in volumetric proportions for sunken portion of the toilet to the required thickness including mixing, transporting, placing, consolidating, curing etc., all as directed including cement and all other materials, labour, tools, equipments, etc., complete.

b). Tower bolt (barrel type) 100x10 mm

c). Tower bolt (barrel type) 75x10 mm

d). Hook and eye 250mm

b). C.P Brass Health faucet 15mm dia. With 1.2M length hose

f). Butt hinges 125mm long

g). Butt hinges 100mm long

46. Providing and fixing white vitreous china pedastal type water closet ( European type W.C pan) with seat and lid, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device(Handle lever) conforming to IS : 7231, with all fittings and fixtures complete,in sound working condition, including cutting and making good the walls and floors wherever required, all as directed at site of work including all materials, labour, tools, equipments, etc., complete.

g). C.P Brass Long body Bib cock 15mm

h). C.P Brass Extension nipple of size:15mmx50mm

k). C.P Brass 15mm dia. Single lever Wall mixer with telephonic shower

i). C.P Brass Shower arm with flange 12" length

49. a). Providing and fixing good quality vitreous white wash hand basin of size 550x 400 mm or nearest size as available in the market ( parryware or equivalent) with single 15mm C.P brass pillar tap. CP waste fitting , 32mm dia cp brass union, 15 mm dia PVC inlet connection, 32mm dia pvc waste pipe fittings, a pair of cast iron brackets etc as available in the market suitable for fixing the wash hand basin, including painting the brackets etc with two coats of synthetic enamel paint over one coat of primer fixing the brackets with teak wood plug and making good the disturbed portion, etc., all in sound working condition all as per relevant specification and as directed including all materials, labour, tools,equipments,etc., complete.

b). Butt hinges - 100mm.

c). Tower Bolt / Draw Bolt - 150mm

d). Tower Bolt / Draw Bolt - 75mm

e). Aldrop 250mm long

f). Door handle 125mm long

g). Door handle 100mm long

h). Magnetic catch for doors/cup boards

i). Hook and eyes 150mm long

j). Hook and eyes 50mm long

49. b). Providing and fixing white vitreous china pedestal for wash basin completely reces

sed at the back for the reception of pipes and fittings suitable for the wash hand basin, including teak wood plug and necessary screws and making good the disturbed portion, etc., all in sound working condition all as per relevant specification and as directed including all materials, labour, tools,equipments,etc., complete.

49. d). Providing and fixing white glazed fire clay Drain Board of size 600 x 450 x 25mm wherever required with proper aligment /slope to drain the water including C.I. brackets, painting of brackets, cutting and making good the walls all in sound working condition all as per relevant specification and as directed including all materials, labour, tools, equipments, etc., complete.

50. Providing and fixing 110mm dia PVC Nahani trap (floor trap with gratings suitable for PVC drainage pipe) embedding the trap making the joints water tight etc., all as directed including all materials, labour, tools, equipments etc., complete.

51. Providing and fixing PVC gully trap with constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 CS sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 crushed stone sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 CS sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 crushed stone sand) 12mm thick, finished with a floating coat of neat cement punning @3.3kg/Sqm all as per relevant specification and as directed including cost of cement,all materials, labour, tools, equipments, etc., complete.

54. Providing, fixing and laying of pipes on floors of, approved quality rigid PVC pipes of 50/75/110mm outside diameters 6 Kgf/sq.cm & 4Kgf/sq.cmpressure-(Finolex (or) Trubore (or) Varun (or) Supreme or equivalent) for waste water lines/sewage lines / rain water down fall pipe including necessary specials like bends, tees, elbows, clamps and specials, etc., wherever required, including joining the pipes using necessary adhesives, and making connections to floor traps, gully traps manholes etc., including cutting the floor concrete masonry and making good the disturbed portions all as directed at site of work including all materials, labour, tools, equipments, scaffolding, cement etc., complete. a). 50 mm Dia (6 Kgf/sq.cm)

55. Supplying and fixing the sanitary fittings with First quality (Parryware/Hindware/ jaquar /Metro or equivalent) C.P Brass / PTMT/ PVC/ SS fittings in toilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. a). PTMT 600mm Long Towel Rail

b). Aluminium hanging floor door stopper with twin rubber & stopper

c). Stainless steel butt hinges 125x64x1.9mm

d). Anodised Aluminium tower bolt (barrel type) 150x10mm

e). Anodised Aluminium handles 125mm with plate 175x32mm

f). Anodised Aluminium Aldrop 250mm long

72. Supplying of Foam board of various sizes for use of signage , identification and name boards whererver required all as directed at site of work including all labour material,tools, equipments, transport,etc. complete.

56. Supplying and fixing on wall Bevelled edge face mirror (saint Gobain or equivalent) of size 610x450mm(approx) with PVC frames and plywood back all as directed at site of work including all materials, labour, tools, equipments, etc., complete.

b). 32mm dia

b). 25mm dia

c). 32mm dia

78. Deep cleaning the existing wall tiles, floor tiles and Mosaic tiles wherever required by using harmless chemical solution and as per manufactures specification all as directed including all labour, tools, equipments, chemical etc. complete.

79. Removing, rolling, stacking and refixing the available mesh gap garware polyster safety materials over hospital building all as directed at site of work including all materials, labour, tools, equipments, etc., complete.

62. Preparing the surfaces of internal walls and applying one coat of primer (Asian / Nippon / Berger or equivalent)) of approved brand and colour of good quality to give an even shade having low VOC (Volatile Organic Compound ) content all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, etc., complete

82. Supplying and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 crushed stone sand). Light shade pigment using white cement all as directed at site of work inclulding all labour, tools, tackles, equipments, fuel transport, etc. complete.

63. Preparing the surfaces of existing interior walls / Ceilings etc., and applying two coats of Colour washing / White washing with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (Asian / Nippon / Berger or equivalent) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour all as directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safety belts, safety helmets, etc.,complete.

64. Preparing the surfaces of existing external walls /sunshades / wherever required and applying two coats of Colour washing with Exterior emulsion paint having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (Asian / Nippon / Berger or equivalent) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour all as directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safety belts, safety helmets, etc.,complete.

88. a). Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

91. Providing and fixing good quality polyester fabric (washable) vertical blinds (100mm wide) with anodized aliminium top rails, wheels in poly carbonate runners for smooth movement and self adjustable unbreakable Teflon spacers, trouble free control unit, bottom chain, fitting chain galvanised steel bottom weight, abord weight including all accessories etc. all as directed including all materials, labour, tools, equipments, scaffolding etc. complete.

66.Preparing the surfaces of old wooden members and painting with two coats of synthetic enamel paint (Asian / Nippon / Berger or equivalent) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient.

68.Preparing the surfaces of old /New steel members and painting with two coats of synthetic enamel paint (Asian / Nippon / Berger or equivalent) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient.

b). 600mm x 600mm

99. Removing wornout GI pipe outlet / delivery pipe embedded in the RCC Over head tank above staircase Head room and Providing and fixing GI pipe / Gun Metal Gate Valve for Delivery / Washout pipe all as directed at site of work including all labours, materials, fabrication, tools, equipments, etc., complete. Note: Necessary Cutting of RCC, laying of concrete and finishing with CM 1:3, 20mm thick with admixtures etc., will be paid under relevant items of BOQ. a). 50mm dia GI Pipe

b). Debris

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Percentage only. The subject tender is a deemed contract as defined in sec.2(119) od CGST ACT 2017 and attracts applicable GST on the total value of contracts. The tenderers shall examine the various provisions of the CGST/IGST/UGST/SGST ACT 2017 as notified by the Central /State Government and as amended from time to time before bidding. Tenderers shall ensure that full benefit of ITC likely to be availed by them is duly considered while quoting percentage. The quoted percentage shall be exclusive of GST and the GST as applicable for the work will be paid by ChPA.

69. Supplying of heavy duty brass/SS/Aluminium fittings for doors, windows, cupboard etc in sound working condition etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. a). Brass cupboard lock 6 lever of approved quality, 75mm size

75. Providing and fixing First quality UPVC Ball valve to the water pipe lines in all floors in sound working condition including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. a). 25mm dia

24. Providing Half brick work using bricks of class designation 50 set in cement mortar 1:4 (1 Cement: 4 CS sand) in footh path, kitchen platform, partition in ground level upto fifth floor level and wherever necessary, all as directed at site of work, including scaffolding, labour, materials, Cement, tools, curing, etc., complete.

4.Supply and Install / Replacing of Distribution Board - III comprising of 1 No 63A, 4P, MCCB as incomer and 2 Nos 32A TP MCB, 12 Nos 20A SP MCB, 'C' Series MCB and 12 Nos 10A SP MCB, 'B' Series MCB as outgoing with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’.

5.Supply and Install / Replacing of Distribution Board – IV comprising of 1 No 63A 4P MCCB as incomer and 1 Nos 32A TP MCB, 3 Nos 20A SP MCB, 9 Nos 16A SP MCB, 'C' Series MCB and 9 Nos 10A SP MCB, 'B' Series MCB as outgoing with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’.

6.Supply of 4 Feet 2 X 20w Box type LED BOX TYPE FITTING with T8 LED Tube lig

ht with SINGLE SIDE connection and all other accessories as per Schedule ‘A’.

7.Supply of 4 Feet 1 X 20w Box type LED BOX TYPE FITTING with T8 LED Tube light with SINGLE SIDE connection and all other accessories as per Schedule ‘A’.

8.Installation Surface/ Recessed of 4 Feet BOX TYPE FITTING light fitting with suitable down rods, brackets as per Schedule ‘A’.

9.Supply of suitable Down Rod for 4 Feet Tube Light Fittings as per Schedule ‘A’.

10.Supply of 2 Feet 10 W Moulded type MIRROR LED Fittings with all connections other accessories as per Schedule ‘A’.

11.Installation of above Moulded type LED Mirror light fittings as per Schedule ‘A’.

12.Supply of recess type diffused LED 20 W Bulk Head light fitting suitable for 220V, full bright at various locations as per Schedule ‘A’.

47. Providing and fixing White vitreous china Orissa pattern W.C pan of size 580x 440 mm with integral type foot rest squatting pan (Indian Type WC Pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, incluing flush pipe, with manually controlled device (Handle lever) conforming to IS :7231, with all fittings and fixtures complete, in sound working condition, including cutting and making good the walls and floors wherever required, all as directed at site of work including all materials, labour, tools, equipments, etc., complete.

13.Installation of Bulk Head light fittings as per Schedule ‘A’.

5. Preparing the surfaces of walls and plastering in cement mortar 1:5 (1 cement : 5 CS sand), 12mm thick to the required finish wherever required all as directed at site of work, including cement and other materials, labour, tools, equipments, scaffolding, curing etc., complete.

49. c). Providing and fixing white vitreous china laboratory sink of Size 600x450x200 mm wherever required with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, including cutting and making good the wall all in sound working condition all as per relevant specification and as directed including all materials, labour, tools, equipments, etc., complete.

81. Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc.all as directed at site of work including all materials, labour, tools, transport, equipments, fuel, etc., complete.

83. a). Hire charges for Tractor with trailor for shift basis (8 hours) for conveying unwanted materials steel/ wooden / Rubber materials/leaves etc to RSO yard /dumping yard with Labour Engaged for lifting the scraps etc..,Loading and unloading materials etc., all as directed at site of work inclulding all labour, tools, tackles, equipments, fuel transport, etc. complete. Note : The required labour will be supplied under relevant item in BoQ.

86. Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., all as directed at site of work including all labour, materials, tools, equipments, etc.,complete.

93. Engaging of labour for removal of unwanted vegetation growth in all floors of the building wherever required all as directed including labour, materials, tools, equipments, transport, fuel, etc., complete.

92. Providing and fixing good quality non - reflective type sun control film (Garware or equivalent) of thickness 50mm microns to the glass panels of the partition / doors / windows including thoroughly cleaning the glass panels and removing the stain if any, with good quality soap or liquid detergents, removing any other foreign particles etc., all as directed including all materials, labour, tools, etc., complete.

14.Supply and Install LED 0.5 W BULB FOR B22 holder suitable for 220V, full bright at various locations as per Schedule ‘A’.

16.Supply and Install / Replacing to be mount in the Surface/ Recessed 220V CALLING BELL with 6 different sounds along with base plates Junction Box and ceiling rose including terminations for all units. including supply of modular switch box with all other accessories etc. as per Schedule ‘A’.

25.Supply and Installation / Replace of 6 Way Metal Box Enclosure as per Schedule ‘A’.

26.Supply and Installation / Replace of 8 Way Metal Box Enclosure as per Schedule ‘A’.

1). Supply and Install / Replacing of Electric Flying Insect Killer Machine 2 feet. Wall Mounted or Free Standing - Hanging Chain Included Removable Catchment Tray For Dead Insect Bodies, Easily Cleanable Without Insect Contact as per Schedule ‘A’.

2.Supply and Install / Replacing of Distribution Board – I comprising of 1 No 125A 4P 25 kA MCCB as incomer 2 Nos 63A TP MCB, 6 Nos 32A SP MCB, 12 Nos 20A SP MCB, 12 Nos 16A SP MCB, 'B' Series MCB and 9 Nos 10A SP MCB, 'B' Series MCB as outgoing with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’.

3.Supply and Install / Replacing of Distribution board - II shall be comprising with suitable way of 1 No 100 A 4P, 25 kA MCCB as incomer and 2 Nos 63A TP MCB, 3 Nos 32A SP MCB, 6 Nos 20A SP MCB, 6 Nos 20A SP MCB, 'C' Series MCB 12 Nos 16A SP MCB, 'B' Series MCB and 12 Nos 10A SP MCB, 'B' Series MCB as outgoing with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’.

17.Supply and Install / Replace of one number 63A FP, MCCB with suitable connections and Metal type ENCLOSURE ('C' series MCCB) at various locations as per Schedule ‘A’.

27.Supply and Install / Replace Surface/ Recessed of all materials and accessories for 16A/15A MODULAR type switch and socket outlet along with base plates, FRAME AND WITH SUITABLE BOX connections as per Schedule ‘A’.

28.Supply and Install / Replace Surface/ Recessed of all materials and accessories for 2 Nos 5A MODULAR type switch and socket outlet along with base plates, FRAME AND with SUITABLE BOX connections as per Schedule ‘A’.

18.Supply and Install / Replace of one number 32A FP, MCCB with suitable connections and Metal type ENCLOSURE ('C' series MCCB) at various locations as per Schedule ‘A’.

15.Supply and Install / Replace of recess type diffused LED 7" round 12 W light fitting WITH BULB suitable for 220V, full bright at various locations as per Schedule ‘A’.

33.Installation of Ceiling fan as per Schedule ‘A’.

19.Supply and Install / Replace of one number 32A DP, MCB with suitable connections and Metal type ENCLOSURE ('C' series MCB) at various locations as per Schedule ‘A’.

34.Supply of suitable Down Rod for Ceiling fan with as per Schedule ‘ A’.

37.Installation of above Wall mounting fans as per Schedule ‘A’.

39.Supply of 18” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’.

40.Installation of above Exhaust fan as per Schedule ‘A’.

41.Supply of 15” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’.

42.Installation of above Exhaust fan as per Schedule ‘A’.

43.Supply of 12” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’.

44.Installation of above Exhaust fan as per Schedule ‘A’.

45.Supply of 9'' size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’.

46.Installation of above Exhaust fan as per Schedule ‘A’.

20.Supply and Install of one number 16A/20A DP, MCB with suitable connections and Metal type ENCLOSURE ('C' series MCB) at various locations as per Schedule ‘A’.

21.Supply and Install / Replace of one number 32A DP, MCB with suitable connections on the EXISTING Metal type ENCLOSURE / DB ('C' series MCB) at various locations as per Schedule ‘A’.

47.Supply of 15 litre, 2000 Watts storage water heater with ABS body and PUF insulation as per Schedule ‘A’.

22.Supply and Install / Replace of one number 20A SP, MCB with suitable connections on the EXISTING Metal type ENCLOSURE / DB ('C' series MCB) at various locations as per Schedule ‘A’.

24.Supply and Install / Replace of one number 10A SP, MCB with suitable connections on the EXISTING Metal type ENCLOSURE / DB ('B' series MCB) at various locations as per Schedule ‘A’.

¼
23.Supply and Install / Replace of one number 16A SP, MCB with suitable connections on the EXISTING Metal type enclosure / DB ('C' series MCB) as at various locations as per Schedule  A . 

29.Supply and Install / Replacing to be mount in the Surface/ Recessed switch board of all materials of 5 Amps Modular Switch and Socket outlet to be mounted in the modular type Sub Switch Board itself, including base plates, FRAME and wiring to the plug as per Schedule  A . ò
30.Supply and Install / Replacing to be mount in the Surface/ Recessed switchboard of all materials of 5 Amps modular switch including supply of modular switch box with all other accessories to control of fan, light etc. as per Schedule  A . ý
31.Supply and Install / Replacing to be mount in the Surface/ Recessed switchboard of all materials of 5 Amps MODULAR Bell push switch including supply of modular switch box with all other accessories to control of fan, light etc. as per Schedule  A . Ÿ
32.Supply of 1200 MM, brown colour sweep Ceiling fan, with wide blades, suitable down Rod, electronic regulator and all other accessories as per Schedule  A . µ
35.Supply of 450 mm sweep, Wall mounting fan with polypropylene plastic blade, powder coated metal body and guards with speed control and all other access

ries as per Schedule  A . µ
36.Supply of 400 mm sweep, Wall mounting fan with polypropylene plastic blade, powder coated metal body and guards with speed control and all other accessories as per Schedule  A . °
38.Supply of 450 mm sweep, Pedestal fan with polypropylene plastic blade, powder coated metal body and guards with speed control and all other accessories as per Schedule  A . æ
49.Supply of EXTENSION BOX that contains 3 Nos 5A MODULAR type switch and 5 PIN socket along with 5 metre 1.5 sqmm 3 core Workshop flexible copper cable and 5A 3 pin TOP outlet along with Suitable connections as per Schedule  A . ë
50.Supply of EXTENSION BOX that contains 2 Nos 15A/5A MODULAR type switch and 6 PIN socket along with 5 metre 2.5 sqmm 3 core Workshop flexible copper cable and 15A 3 pin TOP outlet along with Suitable connections as per Schedule  A . ß
52Supply and wiring of all materials and accessories to carry out the surface/concealed wiring by using suitable size of PVC conduit /Casing and capping with 2 runs 1.5 Sq.mm and one run 1.0 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor multistrand wires for Phase, Neutral and Earth. From SSB to Individual PT for Fans, Tube lights etc., through connected junction/ inspection boxes along with modular flush type control switch along with base plates and ceiling rose including terminations wherever necessary as per the technical specifications as per Schedule  A . The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 
53.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping wiring by using with 4 runs 10 sq.mm and one run of 6 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through connected junction/ inspection boxes along with terminations wherever necessary as per Schedule  A'. The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 
54.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping wiring by using with 4 runs 6 sq.mm and one run of 4 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through connected junction/ inspection boxes along with terminations wherever necessary as per Schedule  A'. The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 
55.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping wiring by using w

ith 4 runs 4 sq.mm and one run of 2.5 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. Ȗ㔁㘀⸀匀甀瀀瀀氀礀 愀渀搀 圀椀爀椀渀最 漀昀 愀氀氀 洀愀琀攀爀椀愀氀猀 愀渀搀 愀挀挀攀猀猀漀爀椀攀猀 愀渀搀 琀漀 挀愀爀爀礀 漀甀琀 琀栀攀 猀甀爀昀愀挀攀⼀挀漀渀挀攀愀氀攀搀 眀椀琀栀 猀甀椀琀愀戀氀攀 猀椀稀攀 漀昀 倀嘀䌀 挀漀渀搀甀椀琀 ⼀䌀䄀匀䤀一䜀 愀渀搀 䌀愀瀀瀀椀渀最 眀椀爀椀渀最 戀礀 甀猀椀渀最 眀椀琀栀 ㈀ 爀甀渀猀 㘀 猀焀⸀洀洀 愀渀搀 漀渀攀 爀甀渀 漀昀 㐀 匀焀⸀洀洀 䘀刀䰀匀 倀嘀䌀 椀渀猀甀氀愀琀攀搀 甀渀猀栀攀愀琀栀攀搀 洀甀氀琀椀猀琀爀愀渀搀 挀漀瀀瀀攀爀 挀漀渀搀甀挀琀漀爀 眀椀爀攀猀 攀琀挀⸀Ⰰ 琀栀爀漀甀最栀 挀漀渀渀攀挀琀攀搀 樀甀渀挀琀椀漀渀⼀ 椀渀猀瀀攀挀琀椀漀渀 戀漀砀攀猀 愀氀漀渀最 眀椀琀栀 琀攀爀洀椀渀愀琀椀漀渀猀 眀栀攀爀攀瘀攀爀 渀攀挀攀猀猀愀爀礀 愀猀 瀀攀爀 匀挀栀攀搀甀氀攀 ᠀䄠✀⸀ 吀栀攀 䌀漀渀琀爀愀挀琀漀爀 猀栀愀氀氀 挀甀琀 琀栀攀 最爀漀漀瘀攀 漀渀 琀栀攀 眀愀氀氀 愀猀 瀀攀爀 琀栀攀 爀攀焀甀椀爀攀洀攀渀琀Ⰰ 愀昀琀攀爀 氀愀礀椀渀最 琀栀攀 瀀椀瀀攀 ☀ 眀椀爀攀Ⰰ 琀栀攀 猀愀洀攀 愀爀攀愀 猀栀愀氀氀 戀攀 爀攀瀀氀愀猀琀攀爀 琀栀攀 最爀漀漀瘀攀⸀਀᠀Ă57.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping wiring by using with 2 runs 4 sq.mm and one run of 2.5 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. Ț㔁㠀⸀匀甀瀀瀀氀礀 愀渀搀 圀椀爀椀渀最 漀昀 愀氀氀 洀愀琀攀爀椀愀氀猀 愀渀搀 愀挀挀攀猀猀漀爀椀攀猀 愀渀搀 琀漀 挀愀爀爀礀 漀甀琀 琀栀攀 猀甀爀昀愀挀攀⼀挀漀渀挀攀愀氀攀搀 眀椀琀栀 猀甀椀琀愀戀氀攀 猀椀稀攀 漀昀 倀嘀䌀 挀漀渀搀甀椀琀 ⼀䌀䄀匀䤀一䜀 愀渀搀 䌀愀瀀瀀椀渀最 眀椀爀椀渀最 戀礀 甀猀椀渀最 眀椀琀栀 ㈀ 爀甀渀猀 ㈀⸀㔀 猀焀⸀洀洀 愀渀搀 漀渀攀 爀甀渀 漀昀 ㄀⸀㔀 匀焀⸀洀洀 䘀刀䰀匀 倀嘀䌀 椀渀猀甀氀愀琀攀搀 甀渀猀栀攀愀琀栀攀搀 洀甀氀琀椀猀琀爀愀渀搀 挀漀瀀瀀攀爀 挀漀渀搀甀挀琀漀爀 眀椀爀攀猀 攀琀挀⸀Ⰰ 琀栀爀漀甀最栀 挀漀渀渀攀挀琀攀搀 樀甀渀挀琀椀漀渀⼀ 椀渀猀瀀攀挀琀椀漀渀 戀漀砀攀猀 愀氀漀渀最 眀椀琀栀 琀攀爀洀椀渀愀琀椀漀渀猀 眀栀攀爀攀瘀攀爀 渀攀挀攀猀猀愀爀礀 愀猀 瀀攀爀 匀挀栀攀搀甀氀攀 ᠀䄠✀⸀ 吀栀攀 䌀漀渀琀爀愀挀琀漀爀 猀栀愀氀氀 挀甀琀 琀栀攀 最爀漀漀瘀攀 漀渀 琀栀攀 眀愀氀氀 愀猀 瀀攀爀 琀栀攀 爀攀焀甀椀爀攀洀攀渀琀Ⰰ 愀昀琀攀爀 氀愀礀椀渀最 琀栀攀 瀀椀瀀攀 ☀ 眀椀爀攀Ⰰ 琀栀攀 猀愀洀攀 愀爀攀愀 猀栀愀氀氀 戀攀 爀攀瀀氀愀猀琀攀爀 琀栀攀 最爀漀漀瘀攀⸀਀ᨀĂ59.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping wiring by using with 2 runs 1.5 sq.mm and one run of 1.0 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. þ㘁 ⸀匀甀瀀瀀氀礀 漀昀 㐀 挀漀爀攀 ㈀㔀 匀焀⸀洀洀 䰀⸀吀⸀ 甀渀搀攀爀最爀漀甀渀搀 挀愀戀氀攀 漀昀 ㄀㄀ 嘀 最愀氀瘀愀渀椀稀攀搀 猀琀攀攀氀 猀琀爀椀瀀 愀爀洀漀甀爀攀搀 堀䰀倀䔀 挀愀戀氀攀 眀椀琀栀 猀琀爀愀渀搀攀搀 䄀氀甀洀椀渀椀甀洀 挀漀渀搀甀挀琀漀爀 挀漀渀昀漀爀洀椀渀最 琀漀 䤀匀 㜀 㤀㠀 倀愀爀琀 䤀 ㄀㤀㠀㔀 眀椀琀栀 氀愀琀攀猀琀 愀洀攀渀搀洀攀渀琀猀 眀椀琀栀 䤀匀䤀 洀愀爀欀 昀漀爀 瘀愀爀椀漀甀猀 氀漀挀愀琀椀漀渀猀 愀猀 瀀攀爀 匀挀栀攀搀甀氀攀 ᠀䄠ᤀ⸠਀︀Ā63.Supply of 4 core 16 Sq.mm L.T. underground cable of 1100 V galvanized steel strip armoured XLPE cable with stranded Aluminium conductor conforming to IS 7098 Part I 1985 with latest amendments with ISI mark for various locations as per Schedule ‘A’. b㄀⸩匠灵汰⁹景㔠‰慰物〠㔮洠潣灰牥湵牡潭牵摥倠䍖挠扡敬倊敲敦牲摥洠歡⁥›楆潮敬⁸ 潐祬慃⽢敌牧湡㉤ࠁ敍楤慣求捯㩫ㄊ⸩匠灵汰⁹湡⁤楦楸杮漠⁦偃䍖倠灩汥湩⁥〵浭搠慩‬牔扵牯⽥䘠湩汯硥漠⁲煥極慶敬瑮⠠湉整湲污眠牯硥潰敳⁤湯眠污⥬眠敨敲敶⁲敮散獳牡⁹湩汣摵湩⁧潣瑳漠⁦楦瑴湩獧‬楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰猠慰楣杮愠汬愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲椠据畬楤杮愠汬氠扡畯Ⱳ琠潯獬‬煥極浰湥ⱴ攠捴‮潣灭敬整ਮŎЈ㘀⸩匠灵汰⁹湡⁤楦楸杮漠⁦偃䍖倠灩汥湩⁥㔲浭搠慩‬牔扵牯⽥䘠湩汯硥漠⁲煥極慶敬瑮⠠潃据慥敬⁤潷歲‬湩汣摵湩⁧畣瑴湩⁧档獡獥愠摮洠歡湩⁧潧摯琠敨眠污獬攠捴⤮眠敨敲敶⁲敮散獳牡⁹湉汣摵湩⁧潣瑳漠⁦楦瑴湩獧‬楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰猠慰楣杮愠汬愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲䤠据畬楤杮愠汬氠扡畯⹲琠潯獬‬煥極浰湥獴‬瑥⹣挠浯汰瑥⹥ ᜀ⼀᠀儀ᜀ开᠀䜀ࠁ⤷‮畓灰祬愠摮映硩湩⁧景䌠噐⁃楐数楬敮㈠洰楤ⱡ吠畲潢敲 楆潮敬⁸牯攠畱癩污湥⁴䌨湯散污摥眠牯Ⱬ椠据畬楤杮挠瑵楴杮挠慨敳⁳湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳瑥⹣ 桷牥癥牥渠捥獥慳祲椠据畬楤杮挠獯⁴景映瑩楴杮ⱳ琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮洰猠慰楣杮愠汬愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲椠据畬楤杮愠汬氠扡畯Ⱳ琠潯獬‬煥極浰湥獴‮瑥⹣挠浯汰瑥⹥ ∀ ἀ儀∀开ἀ愀ࠁ佒圠呁剅倠偉䱅义卅ㄊ⤵‮畓灰祬愠摮映硩湩⁧景䌠噐⁃楐数楬敮㈠洵楤ⱡ吠畲潢敲 楆潮敬⁸牯攠畱癩污湥⁴䌨湯散污摥眠牯Ⱬ椠据畬楤杮挠瑵楴杮挠慨敳⁳湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳瑥⹣ 桷牥癥牥渠捥獥慳祲椠据畬楤杮挠獯⁴景映瑩楴杮ⱳ映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰灳捡湩⁧污獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慬潢牵‬潴汯ⱳ攠畱灩敭瑮ⱳ攠捴‮潣灭敬整 ⌀ሀ᠀ጀᜀ䌀᠀欀ࠁ⤴‮䥓䍔漠⁦敓潣摮牡⁹硏杹湥匠畯捲⁥祓瑳浥਺楄楧慴畆汬⁹畁潴慭楴⁣硏杹湥䌠湯牴汯匠獹整㩭㌠匠畯捲⁥潃瑮潲慐敮楷桴倠楲慭祲䤠瑳愠⁳楬畱摩眠瑩⁨剐⁓祳瑳浥映牯氠煩極⁤硯杹湥愠摮匠捥湯慤祲愠⁳慍楮潦摬‮桔⁥敨癡⁹畤祴挠湯牴汯瀠湡汥琠敢瀠潲楶敤⁤楷桴愠映潬⁷慣慰楣祴漠⁦灡牰硯㈠㘶‶偌⁍瑡㔠‰潴㘠‰獰⁩楷桴⸠䕃䌠牥楴楦摥‬呅⁌楌瑳摥⼠䌠畯瑮祲漠⁦牏楧›敇浲湡⹹Ⰺᨀ椀ᬁ挀ࠁ
⤸‮䥓䍔漠⁦牁慥嘠污敶匠牥楶散唠楮⁴嘨污敶唠楮⥴›䄊敲⁡慖癬⁥敓癲捩⁥湕瑩⠠汁牡…慖癬⁥潃扭湕瑩 牁慥瘠污敶戠硯眠瑩⁨湩畢汩⁴潴捵⁨捳敲湥愠慬浲眠瑩⁨敳獮牯欠瑩‬䙎䅐䌠浯汰慩据⁥牰摯捵⁴潣扭湩摥瘠污敶戠硯愠獳浥汢⁹楷桴愠慬浲☠愠慬浲椠⁳呅⁌楬瑳摥琠䱕ㄠ㘰‹湡⁤千⁁

22.2 No 205 signal equipment. (i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 3é
9). SITC of Area Alarm Service Unit (Medical Gas Alarm Unit): Area Alarm box with touch screen alarm with sensor kit, HTM02-01 Compliance product combined with Medical Gas Alarm (i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) ?' 2(iv). Supply Of Nitrous Oxide Manifold 2+2 Cylinder With Copper tail pipe, Special NRV, Distance piece, Middle frame With Individual Chain Support, Provision For Fixing Fully-Automatic Control Panel Board with the following items : " Total number for Brass block for NRV  4 nos. " Total number for Gas pre heater  4 nos. " Total number of Brass Block for Cylinder Valve  4 nos. " Non Return Valve - 4 nos. " Cylinder Valve - 4 nos. " Block for regulator  2 nos. " Double Stage & Double Gauge Regulator  2 nos. " Middle frame with chain  4 nos. a
3). SITC of Oxygen Source System: Digital Fully Automatic Oxygen Control System: 3 Source Control Panel with Primary Ist as liquid with PRS system for liquid oxygen and Secondary as Manifold. The heavy duty control panel to be provided with a flow capacity of approx 2666 LPM at 50 to 60 psi with .CE Certified, ETL Listed / Country of Orgin : Germany. "_
]

5).SITC of Secondary N2O Main Source System: Supply, Installation, Testing, and Commissioning of Single Cylinder Emergency N2O arrangement using a High Flow Double Guage Single Stage Regulator and 3/4" Control Valve with O-ring Type Adapter for quick release and adopt mechanism using N2O Terminal Unit or NIST with HP Hose,Gas Pre Heater and NRV. .X

9). SITC of Area Valve Service Unit (Valve Unit): Area Valve Service Unit (Alarm & Valve Combo Unit) Area valve box with inbuilt touch screen alarm with sensor kit, NFPA Compliance product combined valve box assembly with alarm & alarm is ETL listed to UL 1069 and CSA C22.2 No 205 signal equipment. (i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen) 3à
10). SITC of Area Alarm Service Unit (Medical Gas Alarm Unit): Area Alarm box with touch screen alarm with sensor kit, HTM02-01 Compliance product combined with Medical Gas Alarm (i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen ) @$ 16. (ii) AGSS Duplex remote switch
 " 16. (iii) AGSS Gas Outlet Points
 Ø 16. SITC of Anesthetic Gas Scavenging System: (i) Duplex Anesthetic Gas Scavenging System (AGSS) Duplex blower type with 1 working + 1 standby, AGSS duplex Remote switch flush type and AGSS transfer and hose(3nos)
4\
A. FIRE PUMPHOUSE EQUIPMENTS 1. MAIN PUMPSET: Supply and Installation of Electrical 3 phase 415v , 50Hz motor driven Horizontal End Suction Top Discharge Centrifugal pumpset with bronze impeller, cast iron body rated 137 Cu.m/hr at 70MWC 3000 RPM With Electrical motor of Suitable 75HP, TEFC and complete with all accessories.For Hydrant System .I
ú2. STANDBY PUMPSET: Supply and Installation of Diesel engine driven horizontal end suction centrifugal pumpset with bronze impeller, cast iron body rated 137 Cu.m/hr at 70 MWC.The pump should have RPM between 2150 complete 90HP with all accessories '&ß'ã&ê6. Supply and Installation of M.S Pipe 200NB above as per IS 3589 , 150NB and Below as per IS 1239 With Heavy Duty Fittings including cutting,welding and testing to the Following Specifications. a). 200 NB, 6.35 mm thick MS -C CLASS ¬ B. FIRE HYDRANT SYSTEM FOR PROPOSED & EXISTING BUILDING:- 1. Above Ground MS ERW pipes as per IS:3589/1239, including Heavy class fittings. a) 150 NB, Heavy Class - C
>¹3. HYDRANT COMPONENTS: a). Double headed, Hydrant valve, oblique type 63 mm dia with flanged inlet with blank cap & chain all are should be considered SS as per standard with ISI Mark D
4. Supply,installation,testing and commisioning of fire hose reel(as per ISI) wall mounted,swinging type 18 SWG MS sheet,fitted with 20 mm dia into 36 m long, high pressure hose with 5 mm outlet GM nozzle with shut off valve(IS: 884) includes stop cock and chrom plated nozzle with all nececssery fixing materials complete. ´
C. ADDRESSABLE FIRE ALARM SYSTEMS 1. Analogue addressable micro Process - controlled Fire Alarm Control Panels with interfacing box, capable of being to the central monitoring System, to monitor and integrated the following quantity of accessories like detectors, MCP's/hooters/control modules, Fault Isolation Modules, hooters, response indicators, fire/fault indicators, audio-visual signals, central processing units, , complete with LCD display( (640 nos. of characters 8 lines min), zone indicating LEDs as per the detailed specification: complete with Battery backup for 48 hours in standy mode and 30 minutes in alarm condition. The system should be capable of detecting fire within 3secs as per UL 9th edition/FM/EN-54 approval with charger for each panel. Each loop should provide with minimum 252 detectors and devices. Fire panel should be RS-485 communication port and integrate with other fire panel and Repeater panel 2 Loop panel %;1.02 Providing and laying of Plain Cement Concrete of mix 1:4:8 in volumetric proportion (1 cement : 4 CS sand : 8 Hard granite graded stone aggregate 40 mm nominal size) for levelling course of Low Level Reservoir and wherever required including mixing, transporting, placing, ramming, consolidating, curing all as per relevant specifications, drawings and as directed including all labour, cost of cement, materials, tools, equipments, etc, complete. Note: The cost of centering and shuttering will be measured and paid seperately under relevant item of this schedule. s

1.03 Preparing the top surfaces of PCC levelling course, side walls of LLR and wherever required and providing plastering in cement mortar 1:5 (1cement : 5 CS sand) 20 mm thick, before laying of tar felt, to the required finish curing etc., all as directed at site of work including all labour, cost of cement, materials, tools, equipment s, scaffolding, etc., complete. l

1.05 Preparing the top surfaces of after laying tar felt LLR flooring area, side walls of LLR and wherever required and providing plastering in cement mortar 1:5 (1 cement : 5 CS sand) 20 mm thick, to the required finish curing etc., all as directed at site of work including all labour, cost of cement, materials, tools, equipment s, scaffolding, etc., complete. ?
1.07 Providing Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 for foundation up to plinth in CM 1:4 (1 cement : 4 CS sand) all as directed at site, including all labour, cost of cement, materials, curing, tools, tackles, equipments, scaffolding, transport, fuel, etc, complete. ,
1.08 Providing centering and shuttering including strutting, propping etc., with steel shutters / spans /props and removal of form for foundations, footings for mass concrete all as directed, including labour,tools,tack

les, equipments, scaffolding, transport etc, complete. a. For levelling course +*
+^12.Providing and laying Reinforced cement concrete of mix 1:1.5:3 (1 cement : 1.5 CS sand : 3 hard granite graded stone aggregate of 20 mm nominal size) in volumetric proportions for R.C.C roof slab all as per relevant specifications and as directed at site of work including scaffolding, shuttering, centering, mixing, transporting, placing, vibrating, curing, including all labour, cost of cement, materials, Cement, equipments, tools, plants, fuel, etc., complete. Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. ›17). Providing and fixing second class teak wood 35mm thick panelled shutters frame for doors and fixing with butt hinges of required size with necessary screws, including panelling 16mm tk with single leaves / double leaves all complete as per direction of Engineer-in-charge / as per chennai port civil engineering manual and drawing (amended )including all labour, cost of cement, materials, tools, equipments, etc., complete. Note:- Butt hinges with necessary screws shall be paid separately. 187. Supplying and fixing 20mm dia PVC Pipe for AC water drain outlet, with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., jointing of pipes & fittings with PVC solvent and testing of joints and including cutting the masonry/concrete wherever required and making good the disturbed portions, all as per relevant specification and directed at site of work, labour, tools, equipments, scaffolding etc., complete Note: Necessary Cutting of Brick work, Concrete, Plastering, etc., will be paid under relevant items of BOQ. Fr
84. Operating of vehicle mounted Heavy duty jetting cum suction machine including diesel with driver and operator for cleaning sewer lines, septic tank, manholes including loading and disposing the waste wherever required as directed at site including all labour, tools, equipments, transport, fuel, etc., complete. Note: 1. For handling/cleaning the machine, the cost of labour charges will be bone by the contractor. 2. The required water will be given in the near by site area at free of cost. 3. The rate shall be inclusive of diesel, all tools and plants etc., complete. 4. The contractor has not claim any charge for damaged parts. 5. The unwanted materials like silt or any garbage to be dumped at open area as directed by the department. 6. If any Break down or labour problem during working time deduction will be calculated proportionately based on the rate per day/per hour. He
97. Supplying and fixing of good quality insects preventing PVC netlon mesh without country weed reepers consisting of 1.8mm X1.8mm apexture for size (Approx) to the window openings and ventilators etc., and wherever required after removing the old damaged mesh including providing 25mm wide hook fasteners nailed stabled continuously on all the four sides of the existing upvc frames with suitable hook and loop fasteners tailored on the edges of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffoldings, etc., complete. –P
98. Removing the exisitng wornout Aluminium sliding door and re-placing with UPVC (Un-Plasticized Polyvinyl Chloride) Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x (85mm & above). (Height above 2.5 metre) all as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffoldings, etc., complete. ˜0
 3. JOCKEY PUMPSET: Supply and Installation of Electrical 3 phase 415v , 50Hz motor driven horizontal Side suction Top Discharge centrifugal pumpset rated 10.8Cu.M/hr. at 70MWC, 2900-3000 RPM With Electrical motor of Suitable 10HP, TEFC and complete with all accessories For Hydrant system. '&æ'ê&
'Ð
4. FIRE PUMP PANEL: a). Autostart panel for the Diesel engine complete auto/ manual switch, indication lamps protective fuses with battery charger, suitable of working on 230 V, AC, single phase, enclosure being vermin & dust proof b). Supply and Installation of MCC with Star & Delta starter for the electrical motor driven pumpset / DOL starter Jockey pumpset complete with isolator switch, voltmeter, ammeter manual / auto mode switch, indicating lamps etc., éì6. Excavating trenches by mechanical/manual means of required width for pipes, cables etc., including excavation for sockets, and dressing of sites, ramming of bottoms, for all depths, including getting out the excavated soil, and then returrning the soil as required, in layers not exceeding 20 cm depth, including consolidating each deposited layers by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 mtrs for laying of Pipe, cables etc., exceeding 80mm dia but not exceeding 300 mm dia 
7. Demolishing of cement concrete/ road cutting manually by Mechanical means including disposal of materials within 50 mtrs lead as per direction of Engineer- in-charge and back filing with nominal concreate 1:3:6 or richer mix (including equivalent design mix) 7
c. Dewatering in the excavated area by pumping the water from foundation trench and wherever required using 10 HP motor as per site condition and as directed including pumping the water carefully without affecting the near by site including all labour, tools, plants, equipment, transport, fuel etc., complete. ]16). Providing and fixing in position First Class country wood (SAL/ PADAUK )wrought main frames of finished size 95mm x 58mm for doors with necessary M.S. hold fasts(40x5mm) 400mm (overall length) long / clamps fixed suitably to the masonry / concrete including cutting pockets and grouting with P.C.C.1:3:6 ( 1 Cement : 3 CS sand : 6 Hard granite graded stone aggregate of 20mm nominal size) etc,. and applying two coats of oil type wood preservatives of approved brand and manufacture all as directed at site of work including all labour, cost of cement,materials, tools, equipments, etc., complete. 
13. Re-filling with available excavated earth (excluding boulders, rubbish, debris etc.,) in sides of foundation and wherever required in layers not exceeding 200mm in depth all as per relevant specification and as directed at site including consolidating the deposited earth in layer by ramming and watering including all labour, cost of cement,tools, equipments, etc., complete. 7
15.Preparing the surfaces of ceiling and plastering in CM 1:3, (1 cement : 3 C.S. sand) 6 to 10 mm thick to the required finish wherever required , curing all as per relevant specifications and as directed at site including all materials, cement, labour, tools, equipment, scaffolding, fuel etc., complete.D9. Providing and laying Reinforced cement concrete of mix 1:1.5:3 (1 cement: 1.5CS sand : 3 hard granite graded stone aggregate of 20 mm nominal size) in volumetric proportions for RCC lintel all as per relevant specifications including scaffolding, centering, shuttering, mixing, transporting, placing, vibrating, curing all as directed at site of work including cement, all labour, materials, equipments, tools, plants, fuel, etc., complete. Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. l
61. Preparing the internal / external surfaces of walls by Removing the exist

ing white or colour wash by scrapping and sand papering and preparing the surface, including applying putty to seal the cracks in the wall wherever required all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, etc., complete 9i ªËÕ

67.Preparing the surfaces of new wooden members and painting with two coats of Deluxe multi surface paint (Asian / Nippon / Berger or equivalent) of approved quality over coat of primer to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. jù70. Supplying diluting and injecting chemical emulsion for post constructional anti termite treatment with chlorpyrlphos Emulsifiable concentrate with 1% concentration (i.e. one litre of chemical for every 20 litires of emulsion) in hospital building basement treatment of soil along internal and external wall using chemical emulsion at 2.25 litire per linear metre inlcuding drilling and plugging holes etc. and treating the soil under floors, masonry / concrete inside and outside of buildings wherever required, using chemical emulsion at 1 litre per hole at 30cm interval including drilling 12mm dia holes and plugging them with cement mortar 1:2 to the full depth of the hole and treating the points of contact of wood work by chemical emulsion (in oil of kerosene based solution) at 0.5 litres per hole by drilling 6mm dia at downward angle of 45 degree at 150mm c/c and sealing the same and as directed including all material (including cement) labour, tools, scaffolding, ladder, equipments etc. complete e7
76. Providing and fixing First quality Gun metal gate valve with CI wheel to the water pipe lines in all floors in sound working condition including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. a). 20mm dia p*
©80. Supplying, fabricating and fixing the M.S gate, win

湥楴慬潴⁲牧汩ⱬ䰠摡敤⁲獡瀠牥攠楸瑳湩⁧牯愠⁳楤敲瑣摥愠⁴楳整甠楳杮猠極慴汢⁥瑳畲瑣畲污猠整汥愠⁳敶瑲捩敬ⱳ栠牯穩湯慴獬愠摮搠慩潧慮敭扭牥ⱳ†潴琠敨爠煥物摥氠湥瑧ⱨ眠汥楤杮琠敨樠楯瑮⁳污獡搠物捥整⁤瑡猠瑩⁥景眠牯湡⁤瀠潲楶楤杮猠慣晦汯楤杮‬楦楸杮朠瑡⁥湩瀠潲数⁲污杩浮湥ⱴ椠据畬楤杮瀠楡瑮湩⁧楷桴漠敮挠慯⁴景爠摥漠楸敤瀠楲敭⁲湯琠敨猠整汥洠浥敢獲‬污獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧潣瑳漠⁦散敭瑮愠摮愠汬洠瑡牥慩獬‬慬潢牵‬潴汯ⱳ琠慲獮潰瑲‬煥極浰湥獴‬畦汥‬瑥⹣‬潣灭敬整ਮ潎整›††††††††††††††††††††††††††††††††††††††††††††††ਠ⸱吠敨瀠祡敭瑮椠⁳慢敳⁤湯琠敨琠瑯污眠楥桧⁴景琠敨䴠⁓汦瑡ⱳ戠牡ⱳ攠捴Ⱞ愠⁳慦牢捩瑡摥‮††††††††††㈊‮桔⁥敷杩浨湥⁴楷汬洠摡⁥瑡猠瑩⁥牯愠祮漠桴牥瀠慬散愠⁳灡牰癯摥戠⁹桴⁥湥楧敮牥椭⵮档牡敧‮敎散獳牡⁹档牡敧⁳潦⁲牴湡灳牯ⱴ眠楥桧敭瑮‮瑥⹣‬楷汬戠⁥潢湲⁥祢琠敨挠湯牴捡潴⹲ ᜀ唀᠀昀ࠁ
㐹‮牐癯摩湩⁧湡⁤慬楹杮䬠瑯⁡瑳湯⁥汳扡映潬牯湩⁧癯牥㈠‰浭⠠癡牥条⥥琠楨正戠獡⁥慬摩漠敶⁲湡⁤潪湩整⁤楷桴朠敲⁹散敭瑮猠畬牲⁹業數⁤楷桴瀠杩敭瑮琠慭捴⁨桴⁥桳摡⁥景琠敨猠慬Ɫ椠据畬楤杮爠扵楢杮愠摮瀠汯獩楨杮挠浯汰瑥⁥楷桴戠獡⁥景挠浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮㨠㐠䌠⁓慳摮Ⱙ㈠洵桴捩污獡搠物捥整⁤湩汣摵湩⁧污慭整楲污ⱳ氠扡畯Ⱳ琠潯獬‬瑥⹣‬潣灭敬整ਮ2̊Ј㤀⸶倠潲楶楤杮愠摮映硩湩⁧䙓䍒⠠瑓敥楆敢⁲敒湩潦捲摥䌠湯牣瑥⥥䴠湡潨敬挠癯牥眠瑩⁨牦浡⁥景猠穩⁥獡搠物捥整⁤潦⁲慍桮汯⁥湡⁤桷牥癥牥爠煥極敲⁤湩洠硩ㄠㄺ㔮㌺⠠ㄠ挠浥湥⁴›⸱‵⹃⹓慳摮㨠㌠栠牡⁤牧湡瑩⁥牧摡摥猠潴敮愠杧敲慧整漠⁦〲浭渠浯湩污猠穩⥥椠潶畬敭牴捩瀠潲潰瑲潩獮琠桴⁥敲畱物摥猠穩ⱥ愠汬愠⁳数⁲敲敬慶瑮猠数楣楦慣楴湯ⱳ搠慲楷杮⁳湡⁤獡搠物捥整⁤湩汣摵湩⁧渠捥獥慳祲映牯潷歲‬業楸杮‬牴湡灳牯楴杮‬汰捡湩Ⱨ挠浯慰瑣湩Ⱨ挠牵湩Ⱨ映湩獩楨杮琠敨攠灸獯摥挠湯牣瑥⁥畳晲捡⁥楷桴†敮瑡挠浥湥⁴異湮湩⁧瑡㈠㈮欠⽧煓洮愠⁳楤敲瑣摥‬湩汣摵湩⁧楬瑦湩Ⱨ栠湡汤湩Ⱨ琠慲獮潰瑲湩⁧湡⁤汰捡湩⁧桴⁥潣敶⁲癯牥琠敨映慲敭椠潣牲捥⁴潰楳楴湯愠摮愠楬湧敭瑮‬牰癯摩湩⁧敮散獳牡⁹楬瑦湩⁧潨敬⁳湩汣摵湩⁧污慭整楲污ⱳ氠扡畯Ⱳ琠潯獬‬汰湡獴‬煥極浰湥獴‬畦汥‬瑥⹣‬潣灭敬整ਮ⥡‮〹洰⁸〹洰mᜀ堀᠀᠂豈ᜂ␀⥢‮〵浭搠慩䜠瑡⁥慖癬⁥䠨慥祶䐠瑵⥹ƪĈ㤀⸵倠潲楶楤杮愠摮氠祡湩⁧〴浭琠楨正朠慲潮楬桴捩映潬牯湩⁧湩䌠䌮‮㨱㨲‴湩瘠汯浵瑥楲⁣牰灯牯楴湯⁳ㄨ挠浥湥⁴›′牣獵敨⁤瑳湯⁥慳摮㨠㐠栠牡⁤牧湡瑩⁥牧摡摥猠潴敮愠杧敲慧整ㄠ⸲洵潮業慮楳敺 湩汣摵湩⁧楦楮桳湩⁧潣瑡漠⁦敮瑡挠浥湥⁴瑡㈠㈮䬰⽧㉭‬湩汣摵湩⁧業楸杮‬牴湡灳牯楴杮‬汰捡湩⁧慲浭湩Ⱨ挠湯潳楬慤楴杮‬畣楲杮‬攠捴Ⱞ污獡搠物捥整⁤湩汣摵湩⁧挠浥湥⁴湡⁤污瑯敨⁲洠瑡牥慩獬‬慬潢牵‬琠潯獬‬煥極浰湥獴‬瑥⹣挠浯汰瑥⹥㤊᠀ꠀࠁ⸱䐠獩慭瑮楬杮琠敨攠楸瑳湩⁧潎業慮潣据敲整ㄠ㌺㘺漠⁲楲档牥洠硩椠据畬楤杮攠畱癩污湥⁴敤楳湧洠硩琠桴⁥敲畱物摥氠癥汥‬楳敺愠摮猠慨数†桷牥癥牥爠煥極敲⁤楷桴畯⁴慤慭楧杮琠敨渠慥扲⁹瑳畲瑣牵獥椠⁦湡ⱹ愠摮搠灥獯瑩湩⁧桴⁥敤牢獩眠瑩楨⁡敬摡漠⁦〵潦⁲敲牴湡灳牯慴楴湯愠摮搠獩潰慳污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩湡⁤污獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慬潢牵‬潴汯ⱳ攠畱灩敭瑮‬畦汥‬牴湡灳牯ⱴ攠捴Ⱞ挠浯汰瑥⹥aƧǘĈ㈀‮楄浳湡汴湩⁧ 畣瑴湩⁧琠敨攠楸瑳湩⁧䍒⁃洠浥敢獲†瑡䜠潲湵⁤汦潯⁲湩汣摵湩⁧瑳捡楫杮琠敨猠整汥眠瑩潨瑵搠獩畴扲湩⁧敮牡戠⁹瑳畲瑣牵⁥湡⁤潣癮祥湩⁧湡⁤慨摮湩⁧癯牥琠敨猠牥楶散扡敬洠瑡牥慩獬‬晩愠祮‬潴琠敨搠灥牡浴湥慴瑳牯獥愠摮眠敨敲敶⁲敲畱物摥†湩汣摵湩⁧潣汬捥楴杮愠摮搠灥獯瑩湩⁧桴⁥敄牢獩椠片畯摮氠癥汥眠瑩⁨湩愠氠慥⁤景㔠洰映牯搠獩潰慳污獡猠数楣楦摥愠摮†獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慬潢牵‬潴汯ⱳ攠畱灩敭瑮ⱳ琠慲獮潰瑲‬畦汥攠捴Ⱞ挠浯汰瑥⹥愊᠀꼀ࠁ⸹䐠獩慭瑮楬杮愠摮爠浥癯湩⁧桴⁥硥獩楴杮眠牯⵮畯⁴潷摯湥⼠䄠畬業楮浵圠湩潤獷⼠嘠湥楴慬潴獲攠捴Ⱞ椠据畬楤杮映慲敭眠瑩⁨桳瑵整獲椠污汦潯獲眠瑩潨瑵搠浡条湩⁧桴⁥瑳畲瑣牵獥渠慥扲ⱹ椠据畬楤杮琠慲獮潰瑲湩⁧湡⁤慨摮湩⁧癯牥琠敨猠浡⁥潴搠灥牡浴湥慴瑳牯獥⼠删体礠牡⁤楷桴湩愠氠慥⁤景㌠浫愠汬愠⁳灳捥晩敩⁤湡⁤獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慬潢牵‬潴汯ⱳ攠畱灩敭瑮ⱳ琠慲獮潰瑲‬畦汥攠捴Ⱞ挠浯汰瑥⹥愊⸩䄠敲⁡敌獳琠慨″㉍ ᜀ开᠀需ᜁ관ᤁ퐀ࠂ㘴‮畓灰祬湩⁧湡⁤楦楸杮†桃潬楲慮整⁤潐祬楶祮桃潬楲敤⠠偃䍖 楰数ⱳ栠癡湩⁧桴牥慭瑳扡汩瑩⁹潦⁲潨⁴…潣摬眠瑡牥猠灵汰⁹嘨牡湵⼠䘠湩汯硥⼠吠畲潢敲漠⁲煥極慶敬瑮 潦⁲硥整湲污⼠椠瑮牥慮潷歲⁳硥潰敳⁤湯眠污楷桴䌠噐⁃汰楡…牢獡⁳桴敲摡摥映瑩楴杮ⱳ椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮眠瑩⁨污敲畱物摥愠捣獥潳楲獥氠歩⁥整獥‬敢摮ⱳ挠畯汰湩獧‬汥潢獷‬敲畤散獲‬湵潩獮‬瑥⹣‬樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰偃䍖猠汯敶瑮挠浥湥⁴湡⁤整瑳湩⁧景樠楯瑮⁳湡⁤椠据畬楤杮瀠湵档湩⁧桴⁥慭潳牮⽹潣据敲整眠敨敲敶⁲敲畱物摥愠摮洠歡湩⁧潧摯琠敨搠獩畴扲摥瀠牯楴湯ⱳ愠汬愠⁳数⁲敲敬慶瑮猠数楣楦慣楴湯愠摮搠物捥整⁤瑡猠瑩⁥景眠牯Ⱬ†慬潢牵‬潴汯ⱳ攠畱灩敭瑮ⱳ猠慣晦汯楤杮攠捴Ⱞ挠浯汰瑥੥⥡㌠′浭搠慩ਮFˆ㐀⸶⥢㈠洵楤⹡㐀⸶⥣㈠洰楤⹡ķ̈㐀⸹匠灵汰楹杮愠摮映硩湩⁧桴⁥慳楮慴祲映瑩楴杮⁳楷桴䘠物瑳焠慵楬祴†⹃⁐楦瑴湩獧⠠慐牲睹牡⽥楈摮慷敲 慪畱牡⼠敍牴牯攠畱癩污湥⥴椠琠楯敬獴椠潳湵⁤潷歲湩⁧潣摮瑩潩湩汣摵湩⁧整瑳湩⁧瑥⹣‬污獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慭整楲污ⱳ氠扡畯Ⱳ琠潯獬‬煥極浰湥獴‬瑥⹣‬潣灭敬整ਮ⥡䠠慥瑬⁨慆捵瑥ਠ.ĥЊ̈㔀⸰䰠慯楤杮‬牴湡灳牯楴杮‬畤灭湩⁧湡⁤敬敶楬杮琠敨猠牵汰獵攠牡桴愠摮搠扥楲⁳瑥⹣‬楷桴湩愠氠慥⁤景㌠欠獭漠瑵楳敤†桴⁥潐瑲瀠敲業敳⁳污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩獮愠摮愠⁳楤敲瑣摥椠据畬楤杮愠汬氠扡畯Ⱳ琠慲獮潰瑲‬潴汯ⱳ攠畱灩敭瑮ⱳ映敵ⱬ攠捴Ⱞ挠浯汰瑥⹥上瑯㩥⸱桔⁥整摮牥牥猠慨汬洠楡瑮楡牴灩猠敨瑥⁳湩琠楲汰捩瑡⁥湩吠畲瑳猧愠灰潲敶⁤潦浲瑡愠⁴楨⁳睯潣瑳ਮ⸲慐浹湥⁴楷汬戠⁥慢敳⁤湯琠敨氠牯祲挠扵捩污挠湯整瑮‮潎搠摥捵楴湯漠⁦潶摩⁳潦⁲敤牢獩眠汩敢洠摡⹥††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††㐠‮〲‥搠摥捵楴湯漠⁦潶摩⁳潦⁲畳灲畬⁳慥瑲⁨眠汩敢洠摡⹥††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††䠠睯癥牥琠敨映湩污焠慵瑮瑩⁹楷汬戠⁥敲瑳楲瑣摥琠捡畴污焠慵瑮瑩⁹景搠扥楲⁳楤浳湡汴湩⁧搯浥汯獩楨杮椠

48.Installation of above Heater as per Schedule ‘A’.

51.LAYING of 1.25 INCH PVC Pipe in the FLOOR / WALL by CONCEALED. The Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove as per Schedule ‘A’.

ems. (a) Surplus Earth R÷Ô

10. Dismantling / cutting the existing RCC members at all floors including stacking the steel without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores and wherever required including collecting and depositing the Debris in Ground level with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. _1M2 (One Square Metre)"74. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge and as directed at site of work including transporting, placing, all materials, labour, tools, plants, equipments, fuel, etc., complete. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) qƒ100. Loading, transporting, dumping and leveling the surplus earth and debris etc., within a lead of 3kms out side the Port premises all as per relevant specifications and as directed including all labour, transport, tools, equipments, fuel, etc., complete. Note:1.The tenderer shall maintain trip sheets in triplicate in ChP's approved format at his own cost. 2.Payment will be based on the lorry cubical content. No deduction of voids for debris will be made. 4. 20% deduction of voids for surplus earth will be made. However the final quantity will be restricted to actual quantity of debris dismantling /demolishing items. (a) Surplus Earth j ¢ 1). Charges for Dismantling, Removal, Loading, Transporting, Dumping of old, reduntant various Alu power cables and LT panels etc from Hospital complex to RSD !e).End termination for 4Core x 70 9. Supply installation testing commsioning of wall mounted LT Panel -I comprising 250Amps 4 pole incomer MCCB and 3 NoS 100AmPs MCCB as out going a). Supply È10). Supply installation testing commsioning of wall mounted LT Panel -II comprising 2 nos 400 Amps 4p MCCB as incomers, 10 Nos 100Amps, 4p,MCCBS, 1 Nos. 250A MCCB 4P as out going feeders a). Supply 1 JobSetset e). End termination 4core 50sqmme). End termination 4core 2514). Charges for Rerouting of various size LT cables 16 sqmm to 300 sqmm including dis connection and reconnection a). In trench U19). Supply & Mounting of cone type FRP junctions for 500 mm tray to 150mm a). SupplyU20). Supply & Mounting of cone type FRP junctions for 300 mm tray to 150mm a). Supply^24). SITC of AC DBs with 100A MCCB 4P as Incomer and 16 Nos 20A DP MCB as outgoing a). Supply '27). Supply& Installation of 100KVAR AFC panel,indoor Floor Mounted , Top side Cable Entry 415V, 3-phase, 50Hz microcontroller-based APFC relay for automatic power factor correction, capacitor duty contactors, individual MCB protection for each capacitor bank, a current transformer (CT) for accurate current sensing, and a digital display for parameters like voltage, current, and power factor. The panel will also have specific features such as auto/manual mode, screen hold, and overload protection with 200A,50KA, 4P MCCB as incomer a). Supply :23). Supply & laying of GI Earth Strip 25mm*6mm a). Supply¹12). Supply installation testing commsioning of Floor Mounted LT feeder pillar outdoor with 250Amps 4P MCCB as Incomer and 6 nos 100A 4p MCCB 6 nos 63A 4P MCCB as outgoing a). Supply £

ITEM  II CAMC for 5 years Charges for Comprehensive Annual Maintenance Contract for 25 Nos. 2 TR, 3 Star rated Split Air Conditioners at various location Note: The CAMC rate is per unit per month.During the CAMC period the firm shall do servicing of Air Conditioners in a period of 3 months (i.e., 4 times in a year for each AC) and attending break down calls as and when informed by Engineer-in-Charge) a). 1st Year â
ITEM  I Supply and Installation 1). Cost for supply of Non Inverter Type 2 TR capacity 3 star rated slim high wall mounting type split air conditioner along with all required materials and accessories, as per schedule  A . ‘
2). Cost for installation of Non Inverter Type 2 TR capacity 3 star rated slim high wall mounting type split air conditioner, as per schedule  A U18). Supply & Mounting of cone type FRP junctions for 500 mm to 300mm tray a). Supply®13). Supply installation testing commsioning of wall mounting LT Panel -IV comprising 250Amps MCCB as incomer, and1 no 100A MCCB 8 Nos 63 amps 4p mccb as outgoing a). Supply ¾11). Supply installation testing commsioning of wall mounted LT Pane-III comprising 630 Amps 4p MCCB as incomer and 8 Nos 100A 4p MCCB and 6 Nos 63A 4P MCCB as outgoing feeders a). Supply 
25. Preparing the surfaces of Ceiling and applying two coats of white washing using Lovelycem or equivalent to give an even shade all as directed at site of work wherever required including all labour, scaffolding, materials, tools, tackles,equipments, brushes, etc. complete.J26. Supplying, fabricating and placing in position HYSD (Fe 500/ 550 grade) TMT steel bars as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed, including all materials, labour, tools, equipment, transport, fuel, etc., complete. Note: (i) The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for payment purpose. LI34. Supplying, fabricating and placing in position HYSD (Fe 500/ 550 grade) TMT steel bars as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed, including all materials, labour, tools, equipment, transport, fuel, etc., complete. Note: 1.The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for payment purpose. L1 Kg (One Kilo Gram)Gb). Deployment of Labour (Coolie) (3Nos/shift) and engaged 10 shifts1 M (One Metre) Ð

1.18 Loading,

61.Laying of the cable on the wall by Alu. Clamping with equal intervals with all other accessories as per Schedule ‘A’.

62.Laying of the cable of through on the tray as per Schedule ‘A’.

64.Laying of the cable on the wall by Alu. Clamping with equal intervals with all other accessories as per Schedule ‘A’.

transporting and dumping the surplus excavated earth outside the port premises within a lead of 3 km and all as directed including all labour, cost of cement, transport, tools, equipments, fuel, etc., complete. Note: 1. The tenderer shall maintain trip sheets in triplicate in Port’s approved format at his own cost for the quantity of earth transported. 2. Payment will be based on the lorry cubical content. 20% deduction for voids to be made. Ɇ㄀⸹畓灰祬湩Ⱨ映扡楲慣楴杮愠摮瀠慬楣杮椠潰楳楴湯†奈䑓⠠敆㔠〰㔯〵朠慲敤 䵔⁔瑳敥慢獲愠⁳敲湩潦捲浥湥⁴潦⁲污䍒⁃潷歲⁳桷牥癥牥爠煥極敲Ɽ椠据畬楤杮栠湡汤湩Ⱨ挠瑵楴杮‬敢摮湩⁧湡⁤祴湩⁧楷桴ㄠ㈮洵楤⁡汢捡湡敮污摥猠整汥戠湩楤杮眠物⁥湩汣摵湩⁧汰捡湩Ⱨ愠汬愠⁳数⁲敲敬慶瑮猠数楣楦慣楴湯‬牤睡湩獧愠摮愠⁳楤敲瑣摥‬椠据畬楤杮愠汬洠瑡牥慩獬‬慬潢牵‬潴汯ⱳ攠畱灩敭瑮‬牴湡灳牯ⱴ映敵ⱬ攠捴Ⱞ挠浯汰瑥⹥上瑯㩥⸱桔⁥慲整猠慨汬戠⁥湩汣獵癩⁥景挠獯⁴景爠楥普牯散敭瑮猠整汥‬楢摮湩⁧楷敲愠摮映扡楲慣楴湯挠慨杲獥攠捴Ⱞ挠浯汰瑥⹥䈠湩楤杮眠物⁥楷汬渠瑯戠⁥敭獡牵摥映牯瀠祡敭瑮瀠牵潰敳ਮࠂ⸱㐱倠潲楶楤杮‬慣瑳湩⁧湡⁤楦楸杮椠潰瑳潩景删䍃瀠敲慣瑳䴠湡潨敬䌠癯牥猠慬⁢㔷洠桴捩景爠煥極敲⁤楳敺椠散敭瑮挠湯牣瑥⁥㨱⸱㨵″ㄨ挠浥湥⁴ㄺ㔮䌠⁓慳摮㨠㌠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺 湩瘠汯浵瑥楲⁣牰灯牯楴湯椠据畬楤杮映湩獩楨湩⁧桴⁥硥潰敳⁤畳晲捡ⱥ椠散敭瑮洠牯慴⁲㨱″ㄨ挠浥湥⁴›″千猠湡⥤㘠琠〱洠桴捩楷桴愠映潬瑡湩⁧潣瑡漠⁦敮瑡挠浥湥⁴異湮湩⁧污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩獮愠摮愠⁳楤敲瑣摥愠⁴楳整椠据畬楤杮挠獯⁴景挠浥湥ⱴ洠硩湩Ⱨ琠慲獮潰瑲湩Ⱨ瀠慬楣杮‬慲浭湩Ⱨ挠湯潳楬慤楴杮攠捴‬湩汣摵湩⁧桳瑴牥湩Ⱨ猠牴瑵湩Ⱨ挠牵湩Ⱨ攠畱灩敭瑮‬潴汯⁳瑥⹣‬潣灭敬整‮上瑯㩥匊灵汰楹杮‬慦牢捩瑡湩⁧湡⁤楦楸杮椠潰楳楴湯漠⁦敲湩潦捲浥湥⁴瑳敥楷汬戠⁥敭獡牵摥瀠楡⁤敳数慲整祬甠摮牥爠汥癥湡⁴瑩浥漠⁦桴獩猠档摥汵⹥ਠ+*ɓ+ɘ*öȈ㄀ㄮ‵牐癯摩湩⁧湡⁤楦楸杮漠⁦噐⁃楰数ㄠ〰洠楤⁡楷桴䌠睯 楁癲湥⁴牯渠慥敲瑳猠穩⁥獡愠慶汩扡敬†湩琠敨洠牡敫⁴污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩湡⁤獡搠物捥整⁤湩汣摵湩⁧污慭整楲污ⱳ氠扡畯Ⱳ琠潯獬‬煥極浰湥ⱴ琠慲獮潰瑲‬畦汥‬瑥⹣‬潣灭敬整.⬀Ԁ⨀㨀ࠂ⸱㘱匠灵汰楹杮‬慦牢捩瑡湩⁧湡⁤汰捡湩⁧湩瀠獯瑩潩敆㔠〰㔯〵䐠朠慲敤漠⁲潭敲䠠卙⁄䵔⁔瑳敥慢獲愠⁳敲湩潦捲浥湥⁴潦⁲污䍒⁃潷歲⁳湩汣摵湩⁧慨摮楬杮‬畣瑴湩Ⱨ戠湥楤杮愠摮琠楹杮椠潰楳楴湯眠瑩⁨⸱㔲洠楤⁡汢捡湡敮污摥猠整汥戠湩楤杮眠物⁥湩汣摵湩⁧汰捡湩⁧污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩湡⁤獡搠物捥整⁤湩汣摵湩⁧污慭整楲污ⱳ氠扡畯Ⱳ琠潯獬‬煥極浰湥ⱴ琠慲獮潰瑲‬畦汥‬瑥⹣‬潣灭敬整‮上瑯㩥吊敨爠瑡⁥桳污敢椠据畬楳敶漠⁦潣瑳漠⁦敲湩潦捲浥湥⁴瑳敥ⱬ戠湩楤杮眠物⁥湡⁤慦牢捩瑡潩档牡敧⁳瑥⹣‬潣灭敬整‮楂摮湩⁧楷敲眠汩潮⁴敢洠慥畳敲⁤潦⁲慰浹湥⁴異灲獯⹥+*ƍ+ƒ*ŠĈ㄀⤴倠楡瑮湩⁧景琠敨愠潢敶牧畯摮†卍瀠灩獥⼠瘠污敶⁳楷桴漠敮挠慯⁴景洠瑥污瀠楲敭⁲湡⁤睴潣瑡漠⁦楦敲爠摥攠慮敭慰湩⁴景愠灰潲敶⁤畱污瑩ѹ᠀蔀
⸲䐠獩慭瑮楬杮琠敨攠楸瑳湩⁧汐楡散敭瑮挠湯牣瑥⁥湩氠慥業⁸潴琠敨爠煥極敲⁤敬敶ⱬ猠穩⁥湡⁤桳灡⁥桷牥癥牥爠煥極敲⁤楷桴畯⁴慤慭楧杮琠敨渠慥扲⁹瑳畲瑣牵獥椠⁦湡ⱹ愠摮搠灥獯瑩湩⁧桴⁥敤牢獩眠瑩楨⁡敬摡漠⁦〵潦⁲敲牴湡灳牯慴楴湯愠摮搠獩潰慳污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩湡⁤污獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慬潢牵‬潴汯ⱳ攠畱灩敭瑮‬畦汥‬牴湡灳牯ⱴ攠捴Ⱞ挠浯汰瑥⹥�
⸱楄浳湡汴湩⁧ 敤潭楬桳湩⁧桴⁥硥獩楴杮戠楲正眠牯湩挠浥湥⁴潭瑲牡戠⁹慭畮污祬⼠敭档湡捩污祬琠琠敨爠煥極敲⁤敬敶ⱬ猠穩⁥湡⁤猠慨数眠敨敲敶⁲敲畱物摥†楷桴畯⁴搠浡条湩⁧桴⁥瑳畲瑣牵獥渠慥扲⁹湩汣摵湩⁧瑳捡楫杮漠⁦敳癲捩慥汢⁥慭整楲污ⱳ挠汯敬瑣湩⁧愠摮搠灥獯瑩湩⁧桴⁥敤牢獩眠瑩楨⁡敬摡漠⁦〵潦⁲楤灳獯污愠汬愠⁳数⁲敲敬慶瑮猠数楣楦慣楴湯愠摮愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲†湩汣摵湩⁧污慬潢牵‬琠潯獬‬慴正敬ⱳ攠畱灩敭瑮ⱳ琠慲獮潰瑲‬畦汥‬捳晡潦摬湩⁧攠捴Ⱞ挠浯汰瑥੥ɋ㌀䔮牡桴眠牯硥慣慶楴湯†祢洠捥慨楮慣 慭畮污洠慥獮椠牯楤慮祲猠楯ⱬ猠湡Ɽ挠慬⁹業數⁤楷桴爠潯獴‬潢汵敤獲眠楥桧湩⁧湩楤楶畤污祬氠獥⁳桴湡㈠〵䬠Ⱨ搠扥楲ⱳ爠扵楢桳攠捴Ⱞ愠⁳硥獩楴杮愠⁴楳整漠⁦潷歲甠⁰潴ㄠ㔮敤瑰⁨映牯†潦湵慤楴湯⁳愠摮†桷牥⁥癥牥爠煥極敲⁤污獡搠物捥整⁤瑡猠瑩ⱥ椠据畬楤杮搠敲獳湩⁧景猠摩獥爠浡業杮漠⁦潢瑴浯愠汬愠⁳数⁲敲敬慶瑮猠数楣楦慣楴湯†湡⁤獡搠物捥整⁤瑡猠瑩⁥湩汣摵湩⁧敤潰楳楴杮琠敨攠捸癡瑡摥攠牡桴眠瑩楨⁡敬摡漠⁦〵洠映牯琠慲獮潰瑲瑡潩椠据畬楤杮猠潨楲杮‬瑳畲瑴湩⁧晩爠煥極敲Ɽ椠据畬楤杮愠汬氠扡畯Ⱳ琠潯獬‬慴正敬ⱳ攠畱灩敭瑮ⱳ映敵瑥⹣‬潣灭敬整ਮǪ㐀倮潲楶楤杮愠摮氠祡湩⁧汰楡散敭瑮挠湯牣瑥⁥景洠硩ㄠ㐺㠺†ㄨ䌠浥湥㩴㐠䌠⁓慳摮㨠㠠栠牡⁤牧湡瑩⁥牧摡摥猠潴敮愠杧敲慧整漠⁦〴洠潮業慮楳敺 湩瘠汯浵瑥楲⁣牰灯牯楴湯⁳潦⁲敬敶汬湩⁧潣牵敳椠潦湵慤楴湯⁳湡⁤桷牥癥牥爠煥極敲⁤污獡瀠牥爠汥癥湡⁴灳捥晩捩瑡潩湡⁤獡搠物捥整⁤瑡猠瑩⁥湩汣摵湩⁧業楸杮‬牴湡灳牯楴杮‬楶牢瑡湩Ⱨ瀠慬楣杮‬慲浭湩Ⱨ挠湯潳楬慤楴杮‬畣楲杮‬桳瑵整楲杮‬敤慷整楲杮椠⁦湡⁹瑥⹣‬湩汣摵湩⁧污慭整楲污ⱳ挠浥湥ⱴ氠扡畯Ⱳ琠潯獬‬汰湡獴‬煥極浰湥獴‬攠捴Ⱞ挠浯汰瑥⁥ᤊ⸶倠潲楶楤杮愠摮氠祡湩⁧敒湩潦捲摥†敃敭瑮䌠湯牣瑥⁥景洠硩ㄠㄺ㔮㌺⠠‱敃敭瑮›⸱‵千猠湡⁤†›″栠牡⁤牧湡瑩⁥牧摡摥猠潴敮愠杧敲慧整漠⁦〲洠潮業慮楳敺 湩瘠汯浵瑥楲⁣牰灯牯楴湯⁳潦⁲汐湩桴戠慥Ɑ愠汬愠⁳数⁲敲敬慶瑮猠数楣楦慣楴湯⁳湡⁤獡搠物捥整⁤湩汣摵湩⁧潣瑳漠⁦桳瑵整楲杮‬業楸杮‬牴湡灳牯楴杮‬汰捡湩Ⱨ瘠扩慲楴杮昬湩獩楨杮‬畣楲杮攠捴Ⱞ湩汣摵湩⁧污慭整楲污ⱳ氠扡畯Ⱳ猠牴瑵楴杮‬潴汯ⱳ瀠慬瑮ⱳ攠畱灩敭瑮ⱳ洠捡楨敮祲‬畦汥‬瑥⹣‬潣灭敬整ਮ潎整›匠整汥爠楥普牯散敭瑮眠汩敢洠慥畳敲⁤湡⁤慰摩映牯猠灥牡瑡汥⁹湵敤⁲敲敬慶瑮椠整⹭䤊㐱倮潲楶楤杮愠摮氠祡湩⁧汐楡敃敭瑮䌠湯牣瑥⁥景洠硩ㄠㄺ㔮㌺椠潶畬敭牴捩瀠潲潰瑲潩ㄨ䌠浥湥㩴㈠†千猠湡㩤㐠†慨摲朠慲楮整朠慲敤⁤瑳湯⁥条牧来瑡⁥景㈠‰浭渠浯湩污猠穩⥥映牯䜠慲潮映潬牯湩⁧楷桴㐠洰桴捩潦⁲映潬牯愠敲⁡潣据敲整愠摮眠敨敲敶⁲敲畱物摥‬湩汣摵湩⁧敮散獳牡⁹潦浲眠牯Ⱬ猠畨瑴牥湩Ⱨ†瑳畲瑴湩Ⱨ洠硩湩Ⱨ琠慲獮潰瑲湩Ⱨ瀠慬楣杮‬潣獮汯摩瑡湩Ⱨ敮瑡挠浥湥⁴異湮湩⁧湡⁤慭楫杮琠牨慥⁤楬敮ⱳ挠牵湩⁧瑥⹣‬湩汣摵湩⁧污獡搠物捥整⁤瑡猠瑩⁥景眠牯Ⱬ椠据畬楤杮愠汬氠扡畯Ⱳ挠獯⁴景挠浥湥ⱴ挠浥湥ⱴ洠瑡牥慩獬‬煥極浰湥獴‬潴汯ⱳ瀠慬瑮ⱳ映敵ⱬ猠慣晦汯楤杮‬煥極浰湥獴攠捴Ⱞ挠浯汰瑥⹥吊
ㄲ‮畓灰祬湩Ⱨ映扡楲慣楴杮愠摮映硩湩⁧⹍⁓片汩獬漠⁦敲畱物摥瀠瑡整湲椠牦浡獥漠⁦楷摮睯⁳ 灯湥湩獧†卍†汆瑡ⱳ猠畱牡⁥牯潲湵⁤慢⁲瑥⹣‬湩汣摵湩⁧牰浩湩⁧潣瑡眠瑩⁨灡牰癯摥猠整汥瀠楲敭⁲猠慣晦汯楤杮愠汬愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲‬湩汣摵湩⁧污慭整楲污⁳潣瑳漠⁦挠浥湥ⱴ氠扡畯Ⱳ琠潯獬‬牴湡灳牯⁴‬畦汥‬敷摬湩⁧档牡敧⁳瑥⹣‬潣灭敬整ਮȥ㈀⸲†牐灥牡湩⁧桴⁥畳晲捡⁥景椠瑮牥潩⁲慷汬⁳愠摮愠灰祬湩⁧眠瑩⁨睔潣瑡⁳景瀠敲業浵愠牣汹捩攠畭獬潩慰湩⁴景椠瑮牥潩⁲牧摡ⱥ栠癡湩⁧佖⁃嘨汯瑡汩⁥牏慧楮⁣潣灭畯摮 潣瑮湥⁴敬獳琠慨〵朠慲獭 楬牴⁥景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥湩汣摵湩⁧灡汰楹杮愠摤楴湯污挠慯獴眠敨敲敶⁲敲畱物摥琠捡楨癥⁥癥湥猠慨敤愠摮挠汯畯⁲椠据畬楤杮漠敮挠慯⁴景瀠楲敭⁲†䄨楳湡䈯牥敧⁲牯攠畱癩污湥⥴†湯渠睥眠污獬†桷牥癥牥渠捥獥慳祲愠汬愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲椠据畬楤杮愠汬氠扡畯Ⱳ挠獯⁴景†慭整楲污ⱳ琠潯獬‬捳晡潦摬湩Ⱨ戠畲桳獥‬煥極浰湥獴‬攠捴Ⱞ挠浯汰瑥⹥ਠȚ㈀⸴倠敲慰楲杮琠敨猠牵慦散⁳景渠睥†潷摯湥洠浥敢獲†湡⁤灡汰楹杮眠瑩⁨睴牯洠牯⁥潣瑡⁳癯牥愠湵敤⁲潣瑡漠⁦畳瑩扡敬瀠楲敭⁲桳摡⁥景猠湹桴瑥捩攠慮敭慰湩⁴䄨楳湡⼠䈠牥敧⁲ 畄畬⁸牯攠畱癩污湥⥴†景愠灰潲敶⁤潣潬牵†潴朠癩⁥湡攠敶桳摡⁥湡⁤楦楮桳愠汬愠⁳楤敲瑣摥愠⁴楳整漠⁦潷歲椠据畬楤杮愠汬氠扡畯Ⱳ挠獯⁴洠瑡牥慩獬‬潴汯ⱳ琠捡汫獥‬煥極浰湥獴‬牢獵敨ⱳ猠慣晦汯楤杮攠捴Ⱞ挠浯汰瑥⹥上呏㩅⸱丠捥獥慳祲瀠楡瑮湩⁧潣攭晦捩敩瑮猠慨汬戠⁥污潬敷⁤獡瀠牥䌠⹨⹐⹁攠杮湩敥楲杮洠湡慵⹬㈊吮敨愠潢敶焠慵瑮瑩⁹獩椠据畬楳敶漠⁦慰湩楴杮挠ⵯ晥楦楣湥⁴쬊
㌲‮倠敲慰楲杮琠敨猠牵慦散漠⁦攠瑸牥潩⁲慷汬⁳湡⁤瀠楡瑮湩⁧ 睴漠⁲潭敲挠慯⁴灡汰敩⁤⁀⸱㜶氠瑩⼠ㄠ猰浱漠敶⁲湩汣摵湩⁧牰浩湩⁧潣瑡漠⁦硥整楲牯瀠楲敭⁲灡汰敩⁤⁀⸲〲杫ㄯ猰⹱⥭挠慯獴漠⁦䄠牣汹捩猠潭瑯⁨硥整楲牯瀠楡瑮漠⁦敲畱物摥猠慨敤椠据畬楤杮漠敮挠慯⁴景瀠楲敭⁲䄨楳湡䈯牥敧⁲牯攠畱癩污湥⥴†湯漠摬 敮⁷慷汬⁳眠敨敲敶⁲敮散獳牡⁹污獡搠物捥整⁤瑡猠瑩⁥景眠牯湩汣摵湩⁧污慬潢牵‬洠瑡牥慩獬‬潴汯ⱳ猠慣晦汯楤杮‬牢獵敨ⱳ攠畱灩敭瑮ⱳ†瑥⹣‬潣灭敬整‮

65.Laying of the cable of through on the tray as per Schedule ‘A’.

66.Removal of Existing All kind of Cables, Wirings, Light fittings, all kind of Fans, Panels and DBs as per Schedule ‘A’.

2). Supply of 20 pair (15 mm copper unarmoured PVC cable Preferred make : Finolex /PolyCab/Legrand

3). Supply of 5 pair 0.5 mm copper unarmoured PVC cable Preferred make : Finolex I PolyCab/Legrand

4). Supply and Laying of size PVC casing & capping for the laying 50 pair 0.5 mm copper unarmoured PVC cable inside the cabin

5). Supply and Laying of 1 1/2" size PVC casing & capping for the laying 20 pair 0.5 mm copper unarmoured PVC cable inside the cabin

6). Supply and Laying of 1" size PVC casing & capping for the laying 5 pair 0.5 mm copper unarmoured PVC cable inside the ca in

7). Supply and Installa

2). Supply & Laying of 4core 70, Aluminium conductor XLPE L.T. cable a). Supply

b). Laying In concrete trench

c). Laying on cable Tray

d). Laying Underground

3). Supply & Laying of 3.5 core 185, Aluminium conductor XLPE L.T. cable a). Supply

b). Laying In concrete trench

c). Laying on cable Tray

d). Laying Underground

e). End termination for 3.5 x 185

4). Supply & Laying of 3.5c150sqmm LT Alu cable a). Supply

b). In concrete trench

c). On FRP cable tray

d). Under ground

e). End termination

5). Supply & Laying of 4c95 sqmm LT Alu cable a). Supply

b). Laying in Concrete trench

c). On FRP cable tray

d). Underground

e). End termination

6. Supply& laying of 4core 50 square mm alu xlpe lt cable a). Supply

b). Laying in Concrete trench

c). On FRP cable tray

d). Under Ground

7. Supply& laying of 4core 25 square mm alu xlpe lt cable a). Supply

b). Laying in Concrete trench

c). On FRP cable tray

d). Under ground

8. Supply& laying of 4core 16 square mm alu xlpe lt cable a). Supply

b). Laying in Concrete trench

c). On FRP cable tray

d). Under ground

e). End termination 4c16sqmm

b). Installation Testing commissioning

b). Installation Testing commissioning

b). Installation Testing commissioning

b). Installation Testing commissioning

b). Installation Testing commissioning

b). FRP cable tray

c). Underground

15). Supply and Mounting of FRP cable Tray Ladder Type 600 mm width a). Supply

b). Mounting along the wall with Angle Grouting

16). Supply and Mounting of FRP cable Tray Ladder Type 300 mm width a). Supply

b). Mounting along the wall with Angle Grouting

17). Supply & mounting FRP cable TRAY ladder type 150mm width a). Supply

b). Mounting along the wall with Angle Grouting

b). Mounting along the wall with Angle Grouting

8). Supply of Installation of I/O Box

9). Supply and Installation of 50 pair junction box with Krone Connector

b). Installation Testing commissioning

b). Mounting along the wall with FRP/MS Angle Grouting

b). Laying and interconnecting

Meter

b). Laying and interconnecting

b). Installation Testing commissioning

b). Mounting along the wall withMS/FRP Angle Grouting

b). Laying

21). SITC of Permanent Earth Electrode a). Supply

22). Supply & laying of GI Earth Strip 40mm*5mm a). Supply

25). Supply and Laying of GI earthwire 8 SWG a). Supply

26). Supply and providing cable Joints for various size LT cables a). Supply of Joint Kit 3.5.Core 185 Sqmm

b). Providing Joint

c). Supply of Joint Kit 3.5.Core 150 Sqmm

d). Providing Joint

Surgical Block: 5). Supply and fixing of CPVC Pipeline 50mm dia, Trubore/ Finolex or equivalent (Internal work exposed on wall) wherever necessary including cost of fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work including all labour, tools, equipment, etc. complete.

b). 2nd year

c). 3rd year

d). 4th Year

e). 5th Year

Schedule - A5 Electrical- Power supply work,

㘲‮牐癯摩湩⁧湡⁤楦楸杮†湁摯穩摥愠畬業楮浵映瑩楴杮⁳䄨⁃〱朠慲敤愠⁳数⁲卉ㄺ㘸⤸潴琠敨搠潯⁲瑥⹣‬楷桴渠捥獥慳祲猠牣睥⁳污愠⁳楤敲瑣摥愠⁴楳整椠据畬楤杮愠汬†慭整楲污ⱳ氠扡畯Ⱳ琠潯獬‬捳敲獷‬煥極浰湥獴攠捴Ⱞ挠浯汰瑥⹥㈊⸶愠⸩汁牤灯㈠〵洠潬杮ᤊ㘲挨⤠‮畂瑴栠湩敧⁳㈱洵Ⅽ㘲戨⸩吠睯牥戠汯⁴㔱‰⁸〱浭氠湯䱧㘲搨⤠‮湁摯獩摥愠畬業楮浵栠湡楧杮琠灹⁥潤牯猠潴灰牥ⴠ匠湩汧⁥畒扢牥猠潴灰牥㄀䬠⹧⠊湯⁥楋潬朠慲⥭䨊⤱‮敍楤慣慇⁳潃灰牥倠灩汥湩⁥牡慲杮浥湥⁴潴栠湡⁧湯琠敨ਠ慷汬漠⁦潳正瑥琠灹⁥潣湮捥楴湯椠獮慴汬瑡潩景猠慥汭獥⁳挊敬湡摥愠摮搠来敲獡摥渠湯愠獲湥捩污瀠潨灳潨潲獵朠獡ਠ潣灰牥瀠灩⁥楬敮眠瑩⁨慳摤敬⁳潣灭敬整眠瑩⁨牢穡湩⁧眊牯湩汣摵湩⁧污潣灰牥映瑩楴杮⠠整ⱥ攠扬睯‬敲畤散Ⱳਠ潣灵楬杮⸩吠敨挠灯数⁲楰数楬敮⁳桳畯摬戠⁥整瑳摥猠極慴汢⁥昊牯愠猠整浡漠⁦潷歲湩⁧牰獥畳敲漠⁦㜱㌮‴杫‮ 浣′⠊㜱戠牡 湡⁤潣普物潴䈠⁓㘸‴瑓湡慤摲眠瑩⁨灳捥慩汬⁹洊摡⁥潦⁲牢穡摥猠捯敫⁴祴数挠湯敮瑣潩⹮吠敨洠摥捩污ਠ慧⁳潣灰牥瀠灩汥湩⁥桳畯摬戠⁥整瑳摥愠⁳数⁲瑳湡慤摲愠摮ਠ潣浭獩楳湯湩⁧晡整⁲慰湩楴杮愠⁳数⁲湉整湲瑡潩慮潃敤ਠ潎‮卉㈠㜳⼹㤱㌶吠扡敬嘭‮桔⁥楰数楬敮⁳湩瑳污敬⁤瑡琠敨ਠ慶楲畯⁳楷杮⁳湡⁤汦潯獲攠捴Ⱞ挠浯汰瑥⁥獡搠物捥整⁤祢琠敨ਠ敄慰瑲敭瑮污传晦捩牥⁳獡瀠牥䤠⁓潃敤ㄠ㠲㜲⼠ㄠ㠹‹…䤊体㜠㤳‶ 㤱㜸匠数楣楦慣楴湯‮⠊⥩㘷浭传⁄⁘⸱洵桴捩੫㄀⁒੍伨敮删湵楮杮䴊瑥敲਩㄀⁒੍伨敮删湵楮杮䴊瑥敲Ⱙࠄ⠳楩⸩传祸敧慭楮潦摬愠牲湡敧敭瑮⁳景㈠戠湡獫砠㈠‰挊汹湩敤⁲慥档眠湩⁧楷桴猠浥⁩畡潴慭楴⁣潣瑮潲慰敮眊楨档椠据畬敤⁳潣瑮捡⁴慧杵⁥′潎⹳‬畯汴瑥瀠敲獳牵⁥朊畡敧‬牢獡⁳敨癡⁹畤祴䤠⁏⁸敲畧慬潴⁲′潎⹳眠瑩⁨猊極慴汢⁥摡灯整Ⱳ映敬楸汢⁥卓䠠獯⹥䴠楡普汯⁤桳污敢漠⁦愊挠湯瑳畲瑣潩湡⁤景愠搠獥杩獮愠摮洠瑡牥慩畳瑩扡敬映牯ਠ桴⁥敳癲捩⁥牰獥畳敲椠捡潣摲湡散眠瑩⁨卉ㄠ㠲ⴲ㤱㤸‮䔊敭杲湥祣愠慬浲⁳楷桴椠汬浵湩瑡湩⁧楤灳慬⁹潦⁲潬⁷ 栊杩⁨楰数楬敮瀠敲獳牵⁥湡⁤慭晬湵瑣潩楮杮漠⁦祳瑳浥‮ㄊ 慍湩潦摬琠灯映慲敭眠瑩⁨牰癯獩潩潦⁲潣湮捥楴杮ㄠ′挊汹湩敤獲漠楲桧⁴慢歮愠摮ㄠ′祣楬摮牥⁳湯氠晥⁴慢歮ਠ楷桴栠杩⁨牰獥畳敲椠瑮牥潣湮捥楴杮挠灯数⁲畴楢杮‬楳癬牥ਠ牢穡湩Ⱨ渠湯爠瑥牵慶癬ⱥ映獡整敮獲愠摮挠汹湩敤⁲灳潰瑲ਠ業摤敬愠杮敬映慲敭映牯挠慬楰杮㈠砠ㄠ′祣楬摮牥⁳湡⁤敲慬整⁤昊獡整敮獲‮桔⁥㉏洠湡晩汯⁤桳畯摬眠瑩⁨瑳湡⁤⁡牰獥畳敲ਠ景ㄠ〴欠⹧⼠䌠㉍‮桔⁥湩瑳污慬楴湯椠⁳潣浭獩楳湯摥愠瑦牥ਠ整瑳湩⁧獡瀠牥猠慴摮牡獤愠摮瀠楡瑮摥愠⁳数⁲湉整湲瑡潩慮䌊摯⁥湡⁤獡搠物捥整⁤祢琠敨䐠灥牡浴湥慴晏楦散獲愠⁳数⁲䤊⁓潃敤ㄠ㠲㜲⼠ㄠ㠹‹…卉⁏㌷㘹⼠ㄠ㠹‷灓捥晩捩瑡潩⹮ⴠ䔀捡끨ࠂ⤷‮䥓䍔漠⁦卉䱏呁佉⁎佃呎佒⁌䅖噌㩅ਠ牂獡⁳獉汯瑡潩慖癬⁥畳瑩扡敬映牯琠敨挠灯数⁲楰数愠摮ਠ桳畯摬戠⁥景渠湯氠扵楲慣整⁤〹搠来敲⁥畴湲氠癥牥戠污瘊污敶漠⁦敲異整⁤慭敫‬潣湮捥摥椠楬敮眠瑩⁨敭楤慣朊獡瀠灩⁥楬敮猠獹整祢甠楳杮猠極慴汢⁥楳敺戠慲獳瘠污敶ਠ摡灯整⁲湵潩Ɱ映牥畲敬‬楮灰敬‬畲扢牥传‧楲杮‬慴楰湯ਠ慬⁰湡⁤瑥⹣䄠汬瀠灩⁥楬敮爠来汵瑡牯⁳桳污敢挠灡扡敬漠⁦挊湯牴汯楬杮瀠灩⁥楬敮瀠敲獳牵⁥湡⁤畭瑳挠浯慰楴汢⁥楷桴ਠ桴⁥敲畱物浥湥獴猠数楣楦摥椠卉ㄠ㠲㜲ㄭ㠹⸹䄠汬瘠污敶⁳猊潨汵⁤敢瀠敮浵瑡捩污祬琠獥整⁤潦⁲睴捩⁥桴⁥潷歲湩⁧瀊敲獳牵⁥潦⁲桴⁥慧⁳楬敮愠⁳数⁲卉䌠摯⁥㈱㈸‷ 㤱㤸☠ਠ卉⁏㌷㘹⼠ㄠ㠹‷敓数楣楦慣楴湯‮⠊⥩ㄠ′浭戠污慶癬⁥楷桴传爭湩⁧祔数䈠瑯⁨湅⁤摁灡整ੲ$㄀敓ੴ伨敮匊瑥팩ࠃ⤵䌮浯牰獥敳⁤敍楤慣楁⁲祓瑳浥›匊灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮愠摮挠浯業獳潩楮杮ਠ景䌠浯牰獥敳⁤楁⁲祓瑳浥漠⁦敒楣牰捯瑡湩⁧伊汩䘠敲⁥楁⁲潃灭敲獳牯䈠汥⁴牄癩湥吠灹⁥〱ਠ偈䄠物䌠浯牰獥潳⁲楷桴映汯潬楷杮瀠潲楶楳湯⹳ਠ獁瀠牥䤠⁓㈱㈸‷ 㤱㜸☠䤠体㜠㤳‶ 㤱㜸匠数楣楦慣楴湯ਠ潃灭敲獳牯瀠捡慫敧挠湯楳瑳⁳景映汯潬楷杮›愊 〱䠠⁐楁⁲潃灭敲獳牯ⴠㄠ丠⹯戊 汅捥牴捩䴠瑯牯ㄠ‰偈ⴠㄠ丠⹯挊 潄瑓牡整⁲‭♌⁔‭〱䠠⁐‭‱潎ਮ⥤䈠獡⁥牆浡⁥楋⁴昨牯䴠瑯牯愠摮䌠浯牰獥潳⥲ⴠㄠ猠瑥ਠ⥥倠敲獳牵⁥睓瑩⁨‭‱潎ਮ⥦倠敲獳牵⁥慇杵⁥‭‱潎‮朊 剎⁖湡⁤楐潬⁴楆瑴湩獧ⴠㄠ丠⹯ਠ⥨䐠汥癩牥⁹畔敢ⴠㄠ丠੯⥩䘠畯摮瑡潩潂瑬⁳…湁档牯䘠獡整敮獲ⴠㄠ䰠瑯ਠ⥪䈠汥⁴畇牡⁤‭‱潎ਮ⥫删晥楲敧慲潴⁲祔数䄠物䐠祲牥㐭‰晣⹭挠灡捡瑩⵹‱潎‮氊 牄楡慂汬嘠污敶ⴠㄠ丠⹯洊 楁⁲畏汴瑥䈠污慖癬⁥‭‱潎ਮ慖畣浵删潯…楁⁲潃灭敲獳牯删潯湉楳敤䄠捣獥潳楲獥਺潎⵮敒畴湲嘠污敶ⱳ䄠物倠敲獳牵⁥睓瑩档‬倊敲獳牵⁥慇杵ⱥ䤠潳慬楴湯嘠污敶ⱳ䄠物䘠汩整獲攠捴Ⱞਠ湉整⁲潣湮捥楴杮瀠灩湩㩧䴠汩⁤瑓敥楐数漠⁦′楷桴映瑩楴杮ੳ ∀⌀ᨀ鄀ࠂ⤶䴮摥捩污嘠捡畵祓瑳浥匊灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮愠摮挠浯業獳潩楮杮漊⁦敒楣牰捯瑡湩⁧楁⁲潃汯摥吠灹⁥ㄨ‰偈 慒楴杮嘊捡畣畐灭愠⁳数⁲潦汬睯湩⁧牰癯獩潩獮ਮ獁瀠牥䤠⁓㈱㈸‷ 㤱㜸☠䤠体㜠㤳‶ 㤱㜸匠数楣楦慣楴湯愊 慖捣浵倠浵⁰‭〱䠠⁐‭‱潎ਮ⥢䔠敬瑣楲⁣潍潴⁲‭〱䠠⁐‭‱潎ਮ⥣䐠䱏匠慴瑲牥眠瑩⁨䱏⁒‭‱潎ਮ⥤嘠捡畣睓瑩档ⴠㄠ丠⹯攊 慖捣浵䜠畡敧ⴠㄠ丠⹯昊 潃瑮潲牆浡⁥楷桴䘠瑩楴杮⁳‭‱潎ਮ⥧匠捵楴湯匠牣扵敢⁲‭‱潎ਮ⥨嘠䈭汥獴ⴠㄠ丠⹯椊 䥇☠䴠⁓楆瑴湩獧ⴠㄠ丠⹯樊 牂獡⁳楆瑴湩獧ⴠㄠ丠⹯權 硅慨獵⁴楓敬据牥ⴠㄠ丠⹯椊 慂敳䘠慲敭映牯䴠瑯牯愠摮嘠捡畣畐灭ⴠㄠ猠瑥洊 楐潬⁴楌敮眠瑩⁨楆瑴湩獧ⴠㄠ猠瑥ਬ慖捣浵删潯…楁⁲潃灭敲獳牯删潯湉楳敤 ∀ᤀᨀ退∂ఀࠂ
〱⸩匠呉⁃景吠牥業慮湕瑩㩳ਠ䥄⁎ 卂匠慴摮牡⁤畏汴瑥倠楯瑮⁳楷桴映潲潬摡湩Ⱨ椠湮牥ਠ潣湮捥楴杮愠摮戠慲獳戠摯⹹匠湩汧⁥牰獥⁳湩敬⁴楷桴琠潷ਠ瑳条⁥牰捯獥⁳楦獲⁴瑳条⁥潦⁲慰楴湥⁴獵条⁥湡⁤敳潣摮ਠ瑳条⁥湩瀠牡楫杮洠摯ⱥ挠癯牥摥戠⁹汰獡楴⁣潣敶⁲畤祬ਠ潣潬牵椠摮捩瑡摥眠瑩⁨灳捥晩捩朠獡渠浡⁥湡⁤潮湩整⁲档湡敧扡敬映牯漠桴牥朠獡獥‮桔⁥潣瑳漠⁦慭整楲污⁳湩汣畤湩⁧琠慲獮潰瑲‬瑥⹣‬潣灭敬整‬獡瀠牥猠慴摮牡⁤灳捥晩捩瑡潩湡⁤獡搠物捥整⁤祢琠敨䐠灥牡浴湥慴晏楦散獲⠊⥩ㄠ䜠獡ⴠ‭䅖噌⁅㈭匠剅䥖䕃䤭体⠠硏杹湥愠摮嘠捡畵⥭˄Ĉ㄀⤱‮䥓䍔漠⁦硏杹湥䘠潬⁷敍整⁲慭敤甠⁰景䈠慲獳眠瑩⁨畈業楤楦牥䈠瑯汴⁥汆睯䴠瑥牥猠潨汵⁤敢戠捡牰獥畳敲挠浯牰獥敳⁤湡⁤桳畯摬ਠ敢愠捣牵瑡⁥慧⁳汦睯洠慥畳敲敭瑮眠瑩⁨潣瑮潲慲杮⁥《ㄭ″楬牴獥瀠牥洠湩瑵⹥䤠⁴桳畯摬洠敥⁴瑳楲瑣瀠牥業獳潩愊摮搠浵汢湩⁧瑳湡慤摲‮桔⁥敭整⁲潢祤猠潨汵⁤敢ਠ慭敤漠⁦牢獡⁳慭整楲污⹳吠敨栠浵摩晩敩⁲潢瑴敬猠潨汵⁤戊⁥慭敤漠⁦湵牢慥慫汢⁥潰祬潣扲湯瑡⁥慭整楲污愠摮愠瑵挊敬癡扡敬愠⁴㌱‴敤牧敥挠湥楴牧瑡⹥吠敨爠瑡⁥湩汣摵獥ਠ汦睯洠瑥牥愠摮椠獴愠捣獥潳楲獥⠠楳楬潣畴敢眠瑩⁨慭歳⸩ਠ桔⁥潣瑳漠⁦慭整楲污⁳湩汣摵湩⁧牴湡灳牯ⱴ攠捴Ⱞ挠浯汰瑥⁥愊⁳数⁲瑳湡慤摲猠数楣楦慣楴湯愠摮愠⁳楤敲瑣摥戠⁹桴⁥䐊灥牡浴湥慴晏楦散⁲湡⁤獡瀠牥䤠⁓㈱㈸‷ 㤱㤸愠摮ਠ卉⁏㌷㘹⼠ㄠ㠹‷灓捥晩捩瑡潩Ὦ᠀ࠁ
㈱⸩匠呉⁃景圠牡⁤慖捣浵唠楮⁴楷桴䜠畡敧戠瑯⁨潭湵整⁤湯愠ਠ潣汬捥楴湯樠牡漠⁦慣慰楣祴㘠〰洠湡⁤楷桴愠眠污牢捡敫⁴昊牯洠畯瑮湩⁧瑩漠桴⁥慷汬‮桔⁥潣汬捥潩慪⁲桳畯摬戠⁥洊摡⁥景甠扮敲歡扡敬瀠汯捹牡潢慮整洠瑡牥慩獬眠楨档ਠ獩映汵祬愠瑵汣慥慶汢⁥瑡ㄠ㐳搠来敲⁥散瑮杩慲敤愠⁳数⁲猊慴摮牡⁤灳捥晩捩瑡潩湡⁤獡搠物捥整⁤祢琠敨䐠灥牡浴湥慴伊晦捩牥⁳湡⁤獡瀠牥䤠⁓㈱㈸‷ 㤱㤸愠摮䤠体㜠㤳‶ 㤱㜸ਠ灓捥晩捩瑡潩⹮吠敨爠瑡⁥湩汣摵獥挠獯⁴景猠汩捩湯栠獯⁥楷桴ਠ卓渠灩汰⁥湯攠瑩敨⁲楳Ṥ᠀儀ࠃ⤱‮䥓䍔漠⁦敍楤慣慇⁳潃灰牥倠灩汥湩⁥牡慲杮浥湥⁴潴栠湡⁧湯琠敨ਠ慷汬漠⁦潳正瑥琠灹⁥潣湮捥楴湯椠獮慴汬瑡潩景猠慥汭獥⁳挊敬湡摥愠摮搠来敲獡摥渠湯愠獲湥捩污瀠潨灳潨潲獵朠獡ਠ潣灰牥瀠灩⁥楬敮眠瑩⁨慳摤敬⁳潣灭敬整眠瑩⁨牢穡湩⁧眊牯湩汣摵湩⁧污潣灰牥映瑩楴杮⠠整ⱥ攠扬睯‬敲畤散Ⱳਠ潣灵楬杮⸩吠敨挠灯数⁲楰数楬敮⁳桳畯摬戠⁥整瑳摥猠極慴汢⁥昊牯愠猠整浡漠⁦潷歲湩⁧牰獥畳敲漠⁦㜱㌮‴杫‮ 浣′⠊㜱戠牡 湡⁤潣普物潴䈠⁓㘸‴瑓湡慤摲眠瑩⁨灳捥慩汬⁹洊摡⁥潦⁲牢穡摥猠捯敫⁴祴数挠湯敮瑣潩⹮吠敨洠摥捩污ਠ慧⁳潣灰牥瀠灩汥湩⁥桳畯摬戠⁥整瑳摥愠⁳数⁲瑳湡慤摲愠摮ਠ潣浭獩楳湯湩⁧晡整⁲慰湩楴杮愠⁳数⁲湉整湲瑡潩慮潃敤ਠ潎‮卉㈠㜳⼹㤱㌶吠扡敬嘭‮桔⁥楰数楬敮⁳湩瑳污敬⁤瑡琠敨ਠ慶楲畯⁳楷杮⁳湡⁤汦潯獲攠捴Ⱞ挠浯汰瑥⁥獡搠物捥整⁤祢琠敨ਠ敄慰瑲敭瑮污传晦捩牥⁳獡瀠牥䤠⁓潃敤ㄠ㠲㜲⼠ㄠ㠹‹…䤊体㜠㤳‶ 㤱㜸匠数楣楦慣楴湯ਮ椨㜩洶䑏堠ㄠ㔮浭琠楨正㐊᠀㜀ᜃᤀ‱䵒⠊湏੥畒湮湩⁧敍牴⥥⤊ࠄ⠲楩⸩传祸敧慭楮潦摬愠牲湡敧敭瑮⁳景㈠戠湡獫砠㈠‰挊汹湩敤⁲慥档眠湩⁧楷桴猠浥⁩畡潴慭楴⁣潣瑮潲慰敮眊楨档椠据畬敤⁳潣瑮捡⁴慧杵⁥′潎⹳‬畯汴瑥瀠敲獳牵⁥朊畡敧‬牢獡⁳敨癡⁹畤祴䤠⁏⁸敲畧慬潴⁲′潎⹳眠瑩⁨猊極慴汢⁥摡灯整Ⱳ映敬楸汢⁥卓䠠獯⹥䴠楡普汯⁤桳污敢漠⁦愊挠湯瑳畲瑣潩湡⁤景愠搠獥杩獮愠摮洠瑡牥慩畳瑩扡敬映牯ਠ桴⁥敳癲捩⁥牰獥畳敲椠捡潣摲湡散眠瑩⁨卉ㄠ㠲ⴲ㤱㤸‮䔊敭杲湥祣愠慬浲⁳楷桴椠汬浵湩瑡湩⁧楤灳慬⁹潦⁲潬⁷ 栊杩⁨楰数楬敮瀠敲獳牵⁥湡⁤慭晬湵瑣潩楮杮漠⁦祳瑳浥‮ㄊ 慍湩潦摬琠灯映慲敭眠瑩⁨牰癯獩潩潦⁲潣湮捥楴杮ㄠ′挊汹湩敤獲漠楲桧⁴慢歮愠摮ㄠ′祣楬摮牥⁳湯氠晥⁴慢歮ਠ楷桴栠杩⁨牰獥畳敲椠瑮牥潣湮捥楴杮挠灯数⁲畴楢杮‬楳癬牥ਠ牢穡湩Ⱨ渠湯爠瑥牵慶癬ⱥ映獡整敮獲愠摮挠汹湩敤⁲灳潰瑲ਠ業摤敬愠杮敬映慲敭映牯挠慬楰杮㈠砠ㄠ′祣楬摮牥⁳湡⁤敲慬整⁤昊獡整敮獲‮

2). Supply and fixing of CPVC Pipeline 25mm dia, Trubore/ Finolex or equivalent (Internal work exposed on wall ) wherever necessary Including cost of fittings all as directed at site of work Including all labour, tools, equipment, etc. complete.

3). Supply and fixing of CPVC Pipeline 25mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making good the walls etc.) wherever necessary Including cost of fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work Including all labour. tools, equipments, etc. complete.

4). Supply and fixing of CPVC Pipeline 20mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making good the walls etc.) wherever necessary including cost of fittings, the pipe with clamps at 1.00m spacing all as directed at site of work including all labour, tools, equipments. etc. complete.

he O2 manifold should with stand a pressure of 140 kg. / CM2. The installation is commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification*2(iii). Oxygen manifold arrangements of 2 banks x 12 cylinder each wing with semi automatic control panel which includes contact gauge 2 Nos., outlet pressure gauge, brass heavy duty IO x regulator 2 Nos. with suitable adopter, flexible SS Hose. Mainfold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 1282-1989. Emergency alarms with illuminating display for low / high pipeline pressure and malfunctioning of system. 1) Mainfold top frame with provision for connecting 12 cylinders on right bank and 12 cylinders on left bank with high pressure interconnecting copper tubing, silver brazing, non return valve, fasteners and cylinder spport middle angle frame for claping 2 x 12 cylinders and related fasteners. The O2 manifold should with stand a pressure of 140 kg. / CM2. The installation is commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 SpecificationÒ6).Compressed Medical Air System: Supply, installation, testing and commissioning of Compressed Air System of Reciprocating Oil Free Air Compressor Belt Driven Type 15 HP Air Compressor with following provisions. As per IS 12827 / 1987 & ISO 7396 / 1987 Specification Compressor package consists of following: a) 15 HP Air Compressor - 1 No. b) Electric Motor 10 HP - 1 No. c) Dol Starter - L&T - 10 HP - 1 No. d) Base Frame Kit (for Motor and Compressor) - 1 set e) Pressure Swith - 1 No. f) Pressure Gauge - 1 No. g) NRV and Pilot Fittings - 1 No. h) Delivery Tube - 1 No i) Foundation Bolts & Anchor Fasteners - 1 Lot j) Belt Guard - 1 No. k) Refrigerator Type Air Dryer-60 cfm. capacity-1 No. l) Drain Ball Valve - 1 No. m) Air Outlet Ball Valve - 1 No. Vacuum Room & Air Compressor Room Inside Accessories: Non-Return Valves, Air Pressure Switch, Pressure Gauge, Isolation Valves, Air Filters etc., Inter connecting piping: Mild Steel Pipe of 2 with fittings ""—7). Medical Vacuum System Supply, installation, testing and commissioning of Reciprocating Air Cooled Type (15 HP) Rating Vaccum Pump as per following provisions. As per IS 12827 / 1987 & ISO 7396 / 1987 Specification a) Vaccum Pump - 15 HP - 1 No. b) Electric Motor - 15 HP - 1 No. c) DOL Starter with OLR - 1 No. d) Vaccum Switch - 1 No. e) Vaccum Gauge - 1 No. f) Control Frame with Fittings - 1 No. g) Suction Scrubber - 1 No. h) V-Belts - 1 No. i) GI & MS Fittings - 1 No. j) Brass Fittings - 1 No. k) Exhaust Silencer - 1 No. i) Base Frame for Motor and Vaccum Pump - 1 set m) Pilot Line with Fittings - 1 set, Vaccum Room & Air Compressor Room Inside"®8). SITC of ISOLATION CONTROL VALVE: Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber O' ring, tapion lap and etc. All pipe line regulators shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 & ISO 7396 / 1987 Sepecification (i) 12 mm ball valve with O-ring Type Both End Adapter $
11). SITC of Terminal Units: DIN / BS Standard Outlet Points with from loading, inner connecting and brass body. Single press inlet with two stage process first stage for patient usage and second stage in parking mode, covered by plastic cover duly colour indicated with specific gas name and non inter changeable for other gases. The cost of materials inclduing transport, etc., complete, as per standard specification and as directed by the Departmental Officers (i) Oxygen Gas Terminal Unit with Suitable Probe.Ä
12). SITC of Oxygen Flow Meter made up of Brass with Humidifier Bottle Flow Meter should be back pressure compressed and should be accurate gas flow measurement with control range 0-13 litres per minute. It should meet strict permission and dumbling standard. The meter body should be made of brass materials. The humidifier bottle should be made of unbreakable polycorbonate material and auto cleavable at 134 degree centigrate. The rate includes flow meter and its accessories (silicon tube with mask). The cost of materials including transport, etc., complete as per standard specification and as directed by the Departmental Officer and as per IS 12827 / 1989 and ISO 7396 / 1987 Specificationæ

13). SITC of Ward Vaccum Unit with Gauge both mounted on a collection jar of capacity 600 ml and with a wall bracket for mounting it on the wall. The collecion jar should be made of unbreakable polycarbonate materials which is fully auto cleavable at 134 degree centigrade as per standard specification and as directed by the Departmental Officers and as per IS 12827 / 1989 and ISO 7396 / 1987 Specification. The rate includes cost of silicon hose with SS nipple on either side 26( e).Hooks and eyes 100mm long*28. Providing and fixing SFRC (Steel Fiber Reinforced Concrete) Manhole cover with frame of size 600 x 600 mm for Manhole and wherever required in mix 1:1.5:3 ( 1 cement : 1.5 C.S.sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions to the required size, all as per relevant specifications, drawings and as directed including necessary form work, mixing, transporting, placing, compacting, curing, finishing the exposed concrete surface with neat cement punning at 2.2 kg/Sq.m as directed, including removing the existing damaged manhole cover, lifting, handling, transporting and placing the cover over the frame in correct position and alignment, providing necessary lifting holes including all materials, labour, tools, plants, equipments, fuel, etc., complete. Xe) 125mm Handle 
46.Providing and fixing First quality Gun metal gate valve (Full way valve with Handle) of following sizes to the water pipe lines in all floors in sound working condition by removing the existing wheel valve including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. (d). 32mm dia. kp
46.(e) 25 mm dia.  d) 32mm size PTMT Bottle Trap‘

5. Removing the existing damaged wash hand basin with all accessories without disturbing the near by structure and handing over the serviceable materials, if any, to the department stores/ RSD and bringing down the debris to the ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete.FÂ

7. Dismantling AC sheet/Galvalume sheet roofing including ridges, hips, valleys and gutters etc., without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the departmental stores and bringing down the debris to the ground level for disposal and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. bÔ
11. Dismantling and removing aluminium/ Gypsum / wooden partitions wherever required without damaging the near by structures including bringing down the same to ground level, collecting and stacking the unwanted materials within a lead of 50m for disposal and handing over the retrived materials to RSD yard within a lead of 2kms all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel, scaffolding etc., complete. U£
15. Preparing the surfaces of the sunken portion of toilet ar

ea wherever required and plastering with C.M 1:3 (1cement: 3 CS sand) 20mm thick with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement all as per relevant standards and specifications and all as directed at site of work including, curing, all materials, labour, tools, equipments, transport, fuel, etc., complete. 0Vm„Ž23. a). Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD

8). Supply and fixing of G I. pipeline 50mm dia (C-Class) (Internal work exposed on wall) complete with GI fittings and clamps at 1.00m spacing, including cutting chases and making good the walls wherever necessary all as directed at site of work Including all labour, tools, equipments, etc. complete

9). Supply and fixing of G I. pipeline 50mm dia (C-Class) (External work) complete with 0.1. fittings, including trenching and refilling etc. wherever necessary all as directed At site of work including labour, tools, equipments, etc., complete

10). Supply and fixing of 2" Gun Metal Non-Return Valve (Horizontal)

11). Supply and fixing of 2" Gun Metal Gate Valve

12). Supply and fixing of 3/4" CPVC Ball Valve

13). Supply and fixing of I CPVC Ball Valve

14). Dismantling of existing pipeline PVC / UPVC/G.I. of sizes 3/4" Dia , 1" Dia and 2" Dia and shifting to RSA Yard

all as directed at site of work including all materials, labour, tools, equipment, etc., complete. c_
43. Providing and fixing Prelaminated flat pressed three layer or graded wood particle board with both sides decorative lamination, (medium density) Grade I, Type II conforming and marked to IS : 12823 (exterior grade) 12 mm thick for doors / partitions all as directed including all materials, labour, tools, equipments,transport, etc., complete. ^çèë52. Supplying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply (Trubore / Finolex or equivalent) for internal works exposed on wall with CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., jointing of pipes & fittings with one step CPVC solvent cement and testing of joints and including punching the masonry/concrete wherever required and making good the disturbed portions, all as per relevant specification and directed at site of work, including cost of cement and all materials, labour, tools, equipments, scaffolding etc., complete a) 32 mm dia F¡V¢Þc
65. Preparing the surfaces of Old Internal walls and painting with two coats of synthetic enamel paint (colour) (Asian / Nippon / Berger or equivalent) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. fiqI
71. Removing the existing glass panes in the fixed aluminium frames in aluminium windows wherever required and refixing with new Neoprene/EPDM rubber gasket/ sealeant, aluminium clips using existing glass panes, etc., all as directed at site of work including all labour, scaffolding, materials, tools, equipments, etc.,complete.%j€=73. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge and as directed at site of work including transporting, placing, all materials, labour, tools, plants, equipments, fuel, etc., complete. :€ŽŸÜ
77. Engaging of the labours (Coolie) to shifting hospital fixtures / equipments wherever required to the opt places for day to day operation in a safer manner as directed as site including labour, tools, etc., complete. %Y

85. Dewatering using 10 HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges wherever required as directed at site including all labour, tools, equipments, transport, fuel, etc., complete. 11.09 Preparing the surfaces of LLR Flooring & Roof Slab and providing plastering in cement mortar 1:3 (1cement : 3 CS sand) 20 mm thick and providing ISI certified water proofing material in proportion recommended by the manufaturer / Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement and with neat cement slurry to the required finish, curing etc., all as directed at site of work including all labour, cost of cement, materials, tools, equipments, scaffolding, fuel, etc., complete. 71.10 Preparing the surfaces of LLR and providing plastering in cement mortar 1:3 (1cement : 3 CS fine sand) with 12 mm thick with ISI certified water proofing material in proportion recommended by the manufacturer / with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement including finishing with neat cement slurry to the required finish, curing etc., all as directed and wherever required including all labour, cost of cement, materials, tools, equipments, scaffolding, fuel, etc., complete. a. For RCC Side Walls - inside ô
1.11 Providing plastering for the Brick work with cement mortar 1:5 (1cement : 5 CS fine sand) 12 mm thick with providing ISI certified water proofing material / with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement to the required proportioning as per the manufacturer specificaitons, to the required finish, curing etc., all as directed at site of work including all labour, cost of cement, materials, tools, equipments, scaffolding, fuel, etc., complete. `90. Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm & above) x (50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). Note: Glass area will be measured and paid separately as per relevant BoQ.+J*+*yb). Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 1

16). Supply and fixing of 1" - CPVC Ball Valve

Schedule - A4 Electronics & Communication-Telephone Communication work,

Schedule - A6 -Air Condition with CAMC

ii). 15 mm ball valve with O-ring Type Both End Adapter

Schedule - A8 Replacement of Gas pipeline to Kitchen

1). Supplying and fixing of stainless steel 304 Grade 12 mm dia seamless pipe including valve, manifold, flexiable tubes, etc and connection with cooking equipments including fixing in proper position all as directed at site of work including all labour, tools, equipment, etc. complete.

1 M (One Metre)

ii).42mm OD X 1.2mm thick

iii).28mm OD X 0.9mm thick

iv).22mm OD X 0.9mm thick

2). SITC of Primary Oxygen Source System. (i)Liquid Medical Oxygen (LMO) tank 3KL

1No (One Number)

1No (One Number)

1 No. (one number)

4, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Fixed window / ventilator with mullion / transom. Using R4 series with frame (64mm & above ) x (50mm & above) & mullion (64mm & above) x (70mm & above). (Height above 2.5 metre) Note: Glass area will be measured and paid separately as per relevant BoQ. +J*"89. Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 metre). Note: Glass area will be measured and paid separately as per relevant BoQ. XJW`18. Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm & above) x (50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). Note: Glass area will be measured and paid separately as per relevant BoQ.ç
27. Preparing the surfaces on top of the roof or wherever required and Providing plastering in CM 1:3, 20 mm thick (1 cement:3 CS sand) in Terrace portion with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement or as equivalent all as per manufacturer specification all as per relevant specifications and as directed at site of work including curing, cement,water proofing admixture, all materials, labour, tools, equipments, etc., complete

2(iv) High Pressuring Regulating System(Working & Standby) for LMO Tank

1 No. (one number)

iii). 22 mm ball valve with O-ring Type Both End Adapter

Schedule - A9 Replacement of Oxygen pipeline system-(i) Medical Block

3.SITC of Manifolds ( without Cylinders): (i). Pressure Gauge

iv). 28 mm ball valve with O-ring Type Both End Adapter

vi). 76 mm ball valve with O-ring Type Both End Adapter

iv). 28 mm ball valve with O-ring Type Both End Adapter

v). 42 mm ball valve with O-ring Type Both End Adapter

iv). 28 mm ball valve with O-ring Type Both End Adapter

v). 42 mm ball valve with O-ring Type Both End Adapter

(iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen , Air 4 Bar and Vacuum)

(iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen, Air 4 Bar and Vacuum)

1 No. (one number)

14) SITC of Terminal Unit Console Metal Box (i) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Single Gas

(ii) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for TWO Gas

Schedule - A8 Replacement of Gas pipeline to Kitchen

1). Supplying and fixing of stainless steel 304 Grade 12 mm dia seamless pipe including valve, manifold, flexiable tubes, etc and connection with cooking equipments including fixing in proper position all as directed at site of work including all labour, tools, equipment, etc. complete.

1 M (One Metre)

ii).42mm OD X 1.2mm thick

iii).28mm OD X 0.9mm thick

2(iv) High Pressuring Regulating System(Working & Standby) for LMO Tank

1 No. (one number)

iii). 22 mm ball valve with O-ring Type Both End Adapter

Schedule - A9 Replacement of Oxygen pipeline system-(i) Medical Block

3.SITC of Manifolds ( without Cylinders): (i). Pressure Gauge

iv). 28 mm ball valve with O-ring Type Both End Adapter

iv). 28 mm ball valve with O-ring Type Both End Adapter

iii).35mm OD X 1.2mm thick

2.SITC of Manifolds ( without Cylinders): (i). Pressure Gauge

(iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen, Nitrous Oxide,Air 4 Bar and Vacuum)

(iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen , Nitrous Oxide,Air 4 Bar and Vacuum)

(iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen, Air 4 Bar and Vacuum)

(ii) N2O Gas Terminal Unit with Suitable Probe.

E. Supply and installation of Signage system 1). "FIRE EXIT"(AUTO GLOW)-SINGLE SIDE-FOR FIRE EXIT DOORS-150x300 mm

1M3 (One cubic metre)

1M2 (One square metre)

1Kg (One kilo gram)

15) SITC of Terminal Unit Console Metal Box (i) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Single Gas

1 Set (One Set)

1 No (One Number)

5. Supply and Installation of Cable, Earthing, Cable Tray For the Pumps, Pressure Switchs, Etc., a). '3.5 C x 70 sq.mm Al. Armoured Cable

1 Mtrs (One Meters)

b). 3.5 C x 16 Sq.mm Al. Armoured Cable

c). '3 C x 1.5 Sq.mm Copper armoured Cable

d). '10 C x 2.5 Sq.mm Copper armoured Cable

e). Earthing of the Electrical Motor / MCC (25 x 6 cu.)

f). Cable tray with supports (Tray Size 150mm Width x 75mm Height)

b). 150 NB, 5.5 mm thick MS -C CLASS

c). 100 NB, 5.5 mm thick MS -C CLASS

d). 80 NB, 4.8 mm thick MS- C CLASS

e). 50 NB, 4.8 mm thick MS- C CLASS

7. a).Supply and installation of Y strainer of 150NB with necessary grooved end, nut, bolts & washers, painting, etc. complete as required

7. b). 80mm dia Y Strianer.

8. Supply and installation of Foot valve with necessary grooved end, nut, bolts & washers, painting, etc. complete as required a). 200mm dia

b). 80mm dia

9. Priming tank 1000ltrs capacity

10. Supply and Installation of CI Butterfly Valve PN 16 Rating with Matching flanges,gasket,bolts and nuts a). 200 NB - Lever operated

b). 150 NB - Lever operated

c). 50NB -Lever operated

e) 25mm NRV

d). 100 NB - Lever operated

11). Supply and Installation of CI Non-Return Valve with Matching flanges a)150 NB

b)Pressure guage 0-12 bar

c) 15mm Ball Valve

13). Air Release Valve size & specification should be confrimed by vendor

1 Sq.M (one square meter)

12).Supply & installation of Pressure switch,Pressure gauge, Gunmetal Ball Valve, NRV For Test Array Arrangement including Supporting Arrangement. a)Pressure switch 0-12 bar

15) Supply and Installation of four way fire brigade inlet with 150NB Butterfly valve with matching flanges

1 Mtr (one Metre)

b). 100 NB, Heavy Class - C

c). 80 NB, Heavy Class - C

2. Under Ground MS ERW pipes as per IS:3589/1239, Heavy class including fittings. Coating & Wrapping Materials for underground MS Pipes 200mm

b). Branch Pipe, short with 63 mm dia instantaneous inlet hexagonal nozzle should be considered SS as per standard with ISI Mark

c). R.R.L. hose of 63mm dia SS Coupling as per IS:636 with ISI Mark 15 Mts.long

d). Hydrant box made of 18 G MS Sheet Size: 750 x 600 x 250 with glass fronted door, painted red outside, white inside

5. 150NB Non Return Valve with matching flanges,Gasket,bolts and nuts

6. CI Butterfly valve as per BS:5155 with matching flanges,Gasket,bolts and nuts 150 NB - lever Operated

7. 25NB Pressure Relief with isolation valve

4. Supply, installation, fixing, testing and commissioning ofAddressable control module

9. Civil 3 Nos. pumps foundation work and pipe line scoffolding charges.

10. civil work core cutting.

11. Supports made of MS "C" channel, Ms plate, angle and anchor fastener "U" bolts etc., for above

1 Job. (one Job)

3. Supply, installation, fixing, testing and commissioning ofAddressable monitor module

2. Supplying, installing, testing and commissioning of solid state Amplifier of 480W RMS out put in rack, including necessory control wires, jacks etc. complete.

5. Hooter with Control Relay module and storb light with minimum 85 db audiable and control relay module, power supply units etc @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication with Control Module.

6. Manual call points pull stations of approved make with NO/NC contacts slim type and projecting out from the surface of enclosurewith glass suitable for addressable function

7. 2C 1.5 sq mm armoured FRLS cables in celing with suitable clamps and screws (RED colour)

2. Supply, installation, fixing, testing and commissioning of Analog Addressable Smoke detector (photo) with base, Junction box and other accessories as required and Detectors shall be UL listed,(ON CEILING)

3. Supplying, installing, testing and commissioning of 12W wall mounted type speakers with mounting fixtures

4. Supplying, installing, testing and commissioning of 2 core of 1.5 sq. mm, Annealed tin copper conductor, PVC Sheathed unarmoured FRLS Cable.

5. Supply, Installation, Testing & Commissioning of 4 Zone Call Station with Gooseneck Microphone

2. "DIRECTIONAL EMERGENCY EXIT" (AUTO GLOW-DOUBLE SIDE-150x300 MM-FOR INTERNAL AREAS

3. "EXTINGUISHER" SIGNAGES-(AUTOGLOW)-WITH SUSPENSION CHAIN-150x300mm-double side with suspension chain(SS)

4. "MCP SIGNAGES"-(AUTOGLOW)-WITH SUSPENSION CHAIN-150x300mm-double side with suspension chain(SS)

Schedule - A 10 -(I) Fire Fighting System

Schedule - A 10 -Fire Fighting System (II) Construction of Low Level Reservoir

1.01. Earthwork excavation by manually / mechanically in ordinary soil, sand, clay, mixed wtih roots, boulders, weighing individually less than 250 kg. debris, rubbish etc., for foundation of Low Level Reservoir and wherever required, including dressing of sides, ramming of bottom as specififed under relevant schedules and drawings, depositing the excavated earth within a lead of 50 m all as directed including shoring, shuttering, labour, tools, tackles, equipments, fuel, etc., complete. a. Up to 1.5 m depth

b. below 1.5 m depth

1.04 Providing and laying 3 layer of water proofing treatment with bitumen felt over the plastered levelling course, side walls of LLR and wherever required consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS:702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) all as directed at site of work including all labour, cost of materials, tools, equipment’s, scaffolding, etc.,

complete

1.06 Providing and laying RCC of mix in 1:1.5:3 (1 cement :1.5 coarse sand : 3 Hard granite graded stone aggregate 20 mm nominal size) in volumetric proportions up to plinth level, for base slab / side wall / beams / top cover slab of LLR and wherever required including mixing, transporting, placing, ramming, consolidating, excluding the cost of centering, shuttering, finishing and reinforcement all as per relevant specification and as directed including all materials,cement, labour, curing, tools, equipments, transport, fuel, etc., complete. Note: 1.The cost of centering and shuttering will be measured and paid seperately under relevant item of this schedule. 2. Supplying, fabricating and fixing in position of reinforcement steel will be measured paid seperately under relevant item of this schedule. a. LLR Base Slab

b. LLR side walls

c. LLR Beams

d. LLR top cover slab

b. For base slab

c. For Side Walls

d. For Beams

e. For Roof Slab

1Hr (One Hour)

1M2 (One Square Metre)

1 M3 (One Cubic Metre)

1 No (One Number)

1 Kg (One Kilogram)

Schedule - A 10 -Fire Fighting System (III) Construction of Pump Room

5. Providing Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 Cement : 4 CS sand) for foundation and wherever required all as as per relevant specication and as directed at site including all materials, cement, labour, curing, tools, scaffolding, equipments, transport, fuel ,etc., complete