Constt. of Dysfuntional toilet at MS Machhedi

12mm thick cement plaster of 1 cement: 6 fine sand mix.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats over and including priming coat with water thinnable cement primer)

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.80 litre/10sqm of approved brand and manufacture

Providing and fixing white vitreous china pedestal type water closet (European type W.C .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing CPVC/G.I pipe to IS ( Medium Class) with fitting upto 150mm dia & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls)& includes testing of joints. 15mm Dia Pipe

Providing and fixing CPVC/G.I pipe to IS ( Medium Class) with fitting upto 150mm diad & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls) & includes testing of joints. 15mm Dia Pipe

Providing and Fixing of G.I/PVC fittings .75 mm PVC Pipe

110mm Dia PVC Pipe

110mm Plain Bend

75mm plain Bend

Floor Trap75mm

Floor Trap110mm

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing Cp grating of approved quality 100 mmof nominal dia

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre

Wiring for light point/ fan point/ exhaust fan point/ with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Carriage of Sand for an Av. Lead 35.0 km and AT= 200mtr

Add Provision for CIB