Ganga-Construction of Community Center-Cum-Excelence Centre (Community Center as Guru Jambheshwar Center) at Village Ganga, Block Dabwali, District Sirsa (Scheme-HGVY)

Amount

NS items

FIRE DETECTION AND ALARM SYSTEM Providing, fixing, testing and commissioning of resettable type manual call point, made of ABS housing, having onboard activation and resetable feather touch switched and should have an indicator, which should `blink` green in case of normal condition and become steady Red in case of Operation. MCP should have a transparent ABS cover for physical protection (MAKE : Agni Suraksha (ASES) / System Sensor / Apollo / Siemens)

Providing,fixing,testing and commissioning of response indicators with dual LED suitable for operation on 12/24 volts D.C., sheet steel / Polymer housing suitable for surface/recess mounting including making connections with wires complete in all respects. (Make : Agni Suraksha (ASES), Safeway, Honeywell)

Providing, fixing, testing and commissioning of electronic hooters with strobe, with Polymer housing suitable for wall / ceiling and surface mounting including making connections with wires complete in all respects and as per specifications. (Make : Agni Suraksha (ASES), Safeway, System Sensor)

Supply and fixing of ISI marked (IS:3419 and 2509) 2 mm thick PVC conduit in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing it with M.S. hooks and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees etc as directed at site by the engineer-in-charge with supply of all material labour and T and P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required (Make : B.E.C. / AKG / Tarun / polypack)

Supplying, receiving, storing, handling, fixing, wiring for fire alarm system wiring using ISI marked (IS 694) 1100 Volts grade, PVC insulated, flexible, flame retardant low smoke (FRLS) copper conductor wire, drawn in existing solid / flexible conduits / casing caping including connections to the detectors, manual call points , hooters, response indicators, accessories, fire alarm control panel etc. including termination with bottle type copper lugs as required to complete the system. (Make :RR / Polycab / Rallison / Bonton)

Providing and fixing of self illuminated / auto glow `EXIT` signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site. (Make : Agni Suraksha (ASES), Safeway, Honeywell, AUTOGLO))

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Supplying, installing, testing and commissioning of electric driven automatic fire booster pump set consisting of the following :450 lpm at 35 m Head

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel

DSR 11.4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80MM DIA

DSR 11.4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100MM DIA

F11.2: Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm dia.

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket.

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Providing and fixing portable fire extinguisher carbon dioxide type with cylinder initially fully charged with CO2 gas of 4.5 Kg. Capacity, complete with discharge valve, dishcarge tube, horn, CI bracket for wall mounting etc. conforming to IS: 15683.

Providing and fixing portable fire extinguisher, dry powder type (gas cartridge) with cylinder initially fully charged with dry powder (ABC type) of 4 Kg. Complete with standard discharge valve with tube, CI bracket for wall mounting etc. conforming to IS: 115683.

S/F Fire man axe as rqd.

Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, enamelled fire red finish with `FHC` written in front.The width and height to depend upon the actual size of the fire shaft available and get it approced by Engineer-in Charge/ consultant before fabricationApproximate size 1800x1200 mm.

Providing and fixing dial type pressure gauge with isolation cock and pipe at hydrant station and sprinkler line.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Supply of under ground cable loose in exiting pipe or trenches complete with necessary connections. (16 Sqmm 4 core armaured cable.

S/E of 18/20 watt LED batten Light fitting (Phillips/Bajaj/Crompton/Wipro/G.E./Havells/Halonix ) make including making necessary connections and all patty material required to complete the job in all respect.

S/E of 100 watt LED flood light fitting (Phillips/Bajaj/Crompton/Wipro/G.E./Havells/Halonix ) make including making necessary connections and all patty material required to complete the job in all respect.

S/E of 600x600 mm LED pannel light fitting 36 watt (Phillips/Bajaj/Crompton/Wipro/G.E./Havells/Halonix ) make including making necessary connections and all patty material required to complete the job in all respect.

Excavating, supplying and filling of local earth (including royalty) cum by mechanical transport up to any lead and lift also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (NS)

Bidder Name

Amount

Anil Kumar Contractor (GSTN-06DQJPK4695H1ZD) BID ID -1265941

LS CONTRACTOR (GSTN-06AHAPS9586J1ZN) BID ID -1268541

SHREE RAM ENTERPRISES (GSTN-06BGDPA8224N1ZE) BID ID -1268712

LS CONTRACTOR (BID ID -1268541)

SHREE RAM ENTERPRISES (BID ID -1268712)

LS CONTRACTOR (BID ID -1268541)

Anil Kumar Contractor (BID ID -1265941)