Renovation of H. No.2149, 2079, 2166 and 2099 Type-X Sector-27, Chandigarh

Brick work with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) (As per DSR 6.1.2)

Providing and laying 1st quality ceramic glazed wall tiles of size 300x450mm conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire satisfaction of Engineer-in-Charge. (N.S.)

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). (As per DSR 13.111.2)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50gram/litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) (As per DSR 13.81.1)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (As per DSR 13.99.1)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 fine sand) (As per DSR 14.1.1)

Dismantling old plaster or skirting raking out joint sand cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (As per DSR 15.56)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (As per DSR 15.60)

Providing and laying vitrified floor tiles of specified size 600x600 mm single charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand and manufacture, in all colours and shades, The tiles are to be fixed with 3mm grove using spacers, The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The groves are to be filled with cementious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardner for each kg of Filling material. Single Charge vitrtified Tile of size 600x600mm (N.S.)

Providing and laying vitrified floor tiles of specified sizes (thickness to be specified by the manufacturer) of 1st quality with water absorption less than and conforming to IS : 15622, of approved make, in all colours and shades, in skirting, The tiles are to be fixed with 3mm grove using spacers, The tiles are to be laid on 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The groves are to be filled with cementious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardner for each kg of Filling material . Single Charge vitrified Tile of size 600x600 mm (N.S.)