Part-I Design, supply, installation, testing and commissioning of telecommunication system comprising of Network Switches, telephone exchange, CCTV, battery charger, battery bank, solar system, electronic power fence, installation materials and assoc

SITC - Telecom HRPL

Supply

Equipment Cabinet with Rack for housing SDH equipment, NMS work station, Networking hardware, NMS, Routers (Owner supplied), VOIP Box, Fibre Management System (FMS), associated accessories including power distribution boxes, MCBs/ Isolator Switches, required connectors, cables etc. as per specifications (1 set shall comprise 1, 2 or 3 cabinets based on requirement of the hardware to be installed at each station)

Wall mounted Cabinet (switching closet) for housing Networking Equipment/ CCTV hardware,optical patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications

NMS Hardware for SDH system/network switch complete with cords, cables, connectors, interfaces etc. as per specifications.

NMS System software for monitoring & management of Network Switches used for communication network, CCTV , IS, EPABX System, other associated systems (Licensed for 1500 ports)

Fiber Management System as per specifications for 96F single mode cable as per specs

24 Port L3 Network Switch with Optical Interfaces - 22 Fast Ethernet ports and 2 Optical ports

08 port Industrial Grade layer 2 Network Switch with Optical Interfaces - 6 Fast Ethernet ports and 2 Optical ports

24 Port L2 Network Switch with Optical Interfaces - 22 Fast Ethernet Ports and 2 Optical ports

Hybrid IP Electronic Exchange as per tender specifications equipped with following: a) EPABX Rack/Cabinet b) 32 Analog subscriber lines c) 24 IP Phone extensions d) 24 IP Trunk lines e) 4 CO lines f) MDF and associated accessories

EPABX Maintenance/ Programming Terminal with TFT LED Monitor, peripherals, furniture etc. as per tender specifications

Telephone Instrument as per tender specifications

IP Telephone Instrument as per specifications

Supply-Wall mounted telephone socket

Rugged, Industrial Grade Portable Handheld Service Terminal- Laptop for programming, configuration of SDH equipments, network switch, EPABX, CCTV system, complete with licensed operating system complete in all respects as per specifications

Licensed application software for Rugged laptop for carrying out all configurations of SDH network, EPABX, CCTV system as per specifications

Optical Power Meter as per tender specifications

Optical Power Source as per tender specifications

Digital Multimeter as per tender specifications

LAN Tester As Per Specification

Day-Night Colour IP PTZ Dome Camera with 25X to 35X Optical Zoom, minimum 10X Digital Zoom alongwith IP 66 weatherproof, industrial grade power supply, camera interfacing junction box as applicable, lightning & surge protection, PoE and suitable mount complete with cables, connectors, required interfaces etc. as per tender specifications.

Day-Night Colour IP PTZ Dome Camera, with 15X to 20X Optical Zoom, minimum 10X Digital Zoom along with IP 66 weatherproof housing with IR Illuminator, industrial grade power supply, camera interfacing junction box as applicable, lightning & surge protection, PoE, and suitable mount, complete with cables, connectors, required interfaces etc. as per tender specifications

Day-Night Colour Full HD IP Network Fixed Indoor Dome Camera with IR Illuminator alongwith IP 66 weatherproof housing, industrial grade power supply, lightning & surge protection, PoE suitable mount complete with cables, connectors, required interfaces etc. as per tender specifications

Day-Night Colour HD IP Network Fixed Indoor Dome Camera with IR Illuminator alongwith industrial grade power supply, lightning & surge protection, PoE and suitable mount complete with cables, connectors, required interfaces etc. as per tender specifications

Day-Night Colour 4K IP Fixed Camera with IR Illuminator for surveillance of Station Perimeter, focal length 9 to 20 mm or better, with IP 66 weatherproof housing, industrial grade power supply, camera mounted interfacing junction box as applicable, lightning & surge protection, PoE, suitable mount complete with cables, connectors, required interfaces etc. as per specifications

Network Video Recorder/Failover NVR hardware as per specifications. The NVR Server shall be rack mount suitable for installation in Server Cabinet. (Min. 80 camera)

Network Video Recorder software complete including licensed Operating System Software & licensed software for Network Video Recorder as per specifications. (40 camera licenses)

Client Workstation along with licensed Operating System Software, Keyboard with Joystick along with required cables, connectors, interfaces complete as per specifications.

Licensed Video Monitoring & Control Software for Client Workstation complete as per specifications

LED Colour Monitor (Size 48" to 50") for CCTV Client and equipment NMS as per tender specifications

Field mounted Explosionproof & Weatherproof IP65 Junction Box for Ex-proof Camera/field cameras with suitable cable glands, plugs, Fiber termination patch panel, MCB, media convertor etc complete in all respects for installation of exproof camera/field camera. The junction shall be used for installation of network switch and optical accessories, power supply etc for CCTV system as applicable (1LS = 1 units of JBs complete with all accessories)

Field mounted Weatherproof IP65 Junction Box for field cameras with suitable cable glands, plugs, Fiber termination patch panel, MCB, media convertor etc complete in all respects for installation of exproof camera/field camera. The junction shall be used for installation of network switch and optical accessories, power supply etc for CCTV system as applicable (1LS = 1 units of JBs complete with all accessories)

Power cable 3 Core x 2.5 mm2 Armoured, Copper as per specifications

Armored Cat 6 UTP Networking Cable as per specifications

Compact UPS of suitable rating (minimum 1000 VA) having minimum 15 minutes backup capacity as per tender specifications

Supply of 3 to 5 meter pole for mounting of CCTV as per technical specification of the tender.

Supply of 6 to 9 meter pole for mounting of CCTV as per technical specification of the tender.

Battery Charger, 230V AC/ 48V DC of minimum 125 A (SMPS based modules , wherein each modules shall be of minimum 25A capacity in n+1 configuration) as per specifications where n is the no. of rectifier modules required to meet current capacity of 125 A . The system includes Surge & Lightning Protection at 230 V AC input & -48 V DC output as per specifications.

Battery Charger, 230V AC/ 48V DC of minimum 75 A (SMPS based modules , wherein each modules shall be of minimum 25A capacity in n+1 configuration) as per specifications where n is the no. of rectifier modules required to meet current capacity of 75 A . The system includes Surge & Lightning Protection at 230 V AC input & -48 V DC output as per specifications.

Tubular Lead Acid OPzS type Battery 48V DC, 400 AH along with battery stand & accessories, as per specifications

Resistive DC load ( 48V/100A)

Portable gravity fed emergency eye washer system

Tubular Lead Acid OPzS type Battery 48V DC, 600 AH along with battery stand & accessories, as per specifications

Solar System for RCP Locations (Capacity 6 KWp) as per specifications

Solar System for Independent SV Locations (Capacity 3 KWp) as per specifications

Electronic Perimeter Security System (Power Fencing) for Solar Panels at RCP/ CP+MOV/MOV locations as per tender specifications

Installation Materials for Telecom Equipment , EPABX , audio conferencing networking System, i.e. Networking & Optical fibre accessories including wall mount cabinet, pig tails, patch cords, media converters/ interface converters, connectors, Telephone IDFs, Patch panels, Fibre Distribution Boxes, AC/ DC Distribution Boxes (in racks/cabinets), MCBs/ Isolator Switches, power cables for input power ,required cables for taking power supply from Owner's UPS System/ Battery Charger to equipments, all required Installation Material including Cable conduits, cable trays, PVC conduits, casing pipes, clamps, screws etc. as per specifications

Installation Materials for CCTV system i.e. Networking & Optical fibre accessories including OFC cable conduit, wall mount cabinet, pig tails, patch cords, media converters/ interface converters, connectors, Patch panels, Fibre Distribution Boxes, surge protection devices , power supply convertors, MCBs/ Isolator Switches, power cables for input power ,required cables for taking power supply from Owner's UPS System/ Battery Charger to CCTV system, all required Installation Material including Cable Trays, PVC conduits, casing pipes, clamps, screws etc. as per specifications .

Installation Materials for DC power system, charger,battery bank, solar panel, elelctric power fencing / small wind turbine, AC/ DC Distribution Boxes (ACDBs/ DCDBs), MCBs/ Isolator Switches, Power Distribution Boards, power cables for input power supply to Battery Charger, required cables for taking power supply from Owner's ACDB/distribution / Battery Charger to equipments, required cable from Solar panel to Array junction box to battery charger, all required Installation Material including PVC/GI conduits, casing pipes, clamps, screws etc. as per specifications

Spare CPU Card for EPABX System

Camera Power Supply of each type used for PTZ 30X, 20X , Fixed, exproof cameras

24 Port L3 Network Switch with Optical Interfaces - 22 Fast Ethernet ports and 2 Optical ports

08 port Industrial Grade layer 2 Network Switch with Optical Interfaces - 6 Fast Ethernet ports and 2 Optical ports

24 Port L2 Network Switch with Optical Interfaces - 22 Fast Ethernet Ports and 2 Optical ports

Set of spares for Battery Charger as per specifications comprising -i) SMR Module (4 Sets) ii) Monitoring, Controller Module (2 Sets) iii) Display Module (2 Sets) iv) Any other OEM specific Electronic Card (2 Sets) v) All types of Contactors & Fuses (4 Sets)

"Set of spares for Solar Charge Controller as per specifications comprising - i) Solar Charge Controller Module (4 Sets) ii) Any other OEM specific Electronic Card (2 Sets) "

Services

Erection, Installation, Testing and Commissioning of complete Telecommunication System which includes laying of patch cord/pig tails from FTB to equipment rack, laying of power supply cable from owner's power system to equipment rack, extension of earthing, commissioning of networking equipment including SDH, network switch, rack, FMS, interbuilding network/voice connectivity etc to complete the work in all respect as per scope and technical specifictaions of the tender at A ttended Station, Including interfacing with existing Telecom system/EPABX as per scope of work of the tender

Erection, Installation, Testing and Commissioning of complete CCTV System which includes laying of all types of cables from owner's power system, extension of earthing, commissioning of camera, all filed junction boxes, termination/laying of all types of cables/OFC , NVR, client machines, LED etc all items as per BOM of CCTV system to complete the work in all respect as per scope and technical specifictaions of the tender at Attended Station, Including interfacing with existing CCTV surveillance as per scope of work of the tender.

Erection, Installation, Testing and Commissioning of complete EPABX System which includes commissioning of EPABX, telephone instruments, VOIP box, MDF etc and commissioning of complete voice connectivity between all locations and intra station in different buildings installation of rack, laying of power supply cable from owner's power system to equipment rack, extension of earthing, commissioning of network , all items as per BOM to complete the work in all respect as per scope and technical specifictaions of the tender at Attended Station, Including interfacing with existing EPABX as per scope of work of the tender

Erection, Installation, Testing and Commissioning of NMS system of complete Telecommunication System including NMS system of SDH, network switch, KVM switch, LED etc , all items as per BOM to complete the work in all respect as per scope and technical specifictaions of the tender at Attended Station

Erection, Installation, Testing and Commissioning of complete Telecommunication System which includes laying of patch cord/pig tails from FTB to equipment rack, laying of power supply cable from owner's power system to equipment rack, extension of earthing, interfacing with DC power system ( Battery charger, Solar system, power fencing ) commissioning of network , all items as per BOM except CCTV system to complete the work in all respect as per scope and technical specifict aions of the tender at Unattended Telecom Repeater

Erection, Installation, Testing and Commissioning of complete CCTV System which includes laying of power supply cable from owner's power system to equipment rack,commsioning of CCTV system all items as per BOM of CCTV system to complete the work in all respect as per scope and technical specifictaions of the tender at Unattended Telecom Repeater

Hop testing, end to end testing, trial run of complete link for 10-20 nodes

Imparting Training- At Works & On-site

Foundation, laying and erection of 3 to 5 meter pole for installation of CCTV as per tender specifications including the cost of labor, material, tools, tackles and all civil works complete in all respect.

Foundation, laying and erection of 6 to 9 meter pole for installation of CCTV as per tender specifications including the cost of labor, material, tools, tackles and all civil works complete in all respect.

Excavation of area of earth in the work site for cable trenches for minimum depth of 1000 mm including shoring & shuttering and back filling the trench with excavated earth within the work site as directed by the Site Engineer/ Engineer-in-charge including all labours, tools & tackles, materials complete as per specifications

WBM road/ dyke cutting, concrete breaking for cable trenches including shoring, shuttering etc, if required and repairing of the road, dyke to original condition and disposing of excess material within the work site as per directions of Site Engineer/ Engineer-in-charge. The job shall be complete in all respects including cost of labour, tools & tackles, material, load lift hire charges of equipment if any

Laying of armoured / unarmoured power/ data/ signaling/OFC / video cables in trenches, in cable racks, in HDPE conduits/ in protective pipes, in pole, on structures, in columns, in conduits etc. including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (i) Cables having outer diameter up to 20 mm

Erection, Installation, Testing and Commissioning including local testing of the complete DC power system including solar panel, power fencing DCDB, cabling etc at Independent SV/ MOV Stations, CP+SV/ RCP station as per scope and specifications of tender

Composite

Repair of OFC defects in existing optical fibre cable already laid along the pipeline in various stretches .The job includes locating OFC defects/joint losses by taking OTDR , exposing the cable by excavation/trenching in all kinds of soil including rock, repairing the cut/damaged OFC by splicing and restoring the trenches in original condition, checking , ensuring continuity of OFC with acceptable losses as per direction of site engineer/EIC. Supply and installation of all required materials for repair such as joint kit, Fid marker( with stamping from owner's electronic marker cum locator) , RCC joint box etc shall be in scope of contractor. OFC cable if required for repair works shall be provided by owner. All the test/repair equipments such as OTDR machine, splicing machine, tools/tackles,labour,consumable necessary for performance of work shall be arranged by the contractor. supply of joint kit, Rfid marker shall be as per approved make in the tender.

Earthing : Providing Chemical Earthing as per Drawings and tender technical specifications for a grid of 3 earthpits.

Supplying and spreading of approved quality of fine dry river sand in cable trenches as per drawings,

Supplying and laying of approved quality 75 mm thick second class bricks flat (laid length vertical to cable) soling with sand filling in the intersection, in cable trenches for protection as per drawings,

Supply, erection and installation of MS cable markers, including excavation and installation of Markers, cement concrete grouting, back filling

Earthing strip including all nuts , bolts, welding etc for connecting cctv system to the nearest power earth - 40 mm X 5 mm G.I. earthing strip

Earthing wire/rope including all nuts , bolts etc for connecting cctv system to the nearest power earth - GI wire / rope 10 mm diameter

Supply,erection & installation of cable conduits made of GI pipe of medium Class B (i) GI pipe with 25 mm nominal diameter

Supply,erection & installation of cable conduits made of GI pipe of medium Class B (ii) GI pipe with 50 mm nominal diameter

AMC -Telecom HRPL

Comprehensive Annual Maintenance Contract for 1st year (after completion of defect liability period), for specified SOR items as per tender requirement, specifications and scope of work

Comprehensive Annual Maintenance Contract for 2nd year (after completion of defect liability period), for specified SOR items as per tender requirement, specifications and scope of work

Comprehensive Annual Maintenance Contract for 3rd year (after completion of defect liability period), for specified SOR items as per tender requirement, specifications and scope of work

Comprehensive Annual Maintenance Contract for 4th year (after completion of defect liability period), for specified SOR items as per tender requirement, specifications and scope of work

Comprehensive Annual Maintenance Contract for 5th year (after completion of defect liability period), for specified SOR items as per tender requirement, specifications and scope of work

Please Enable Macros to View BoQ information