Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹23.4 L+₹57,385 (2.51%)Rejected-Finance 1 218 1C SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹23.9 L+₹1.1 L (4.76%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹25.3 L+₹2.4 L (10.6%)Rejected-Finance 08 PINK ENCLAVE MAHESH NAGAR BALAJI VIHAR GOPALPURA JAIPUR RAJASTHAN 302015 INDIA | JAIPUR | RAJASTHAN | 302015 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹30.0 L+₹7.1 L (31.2%)Rejected-Finance N A | NA | NA | 121004 | L5 | Rejected-Finance Being other than lowest |
| Sl No | Description | Qty | Unit | M/S GEETANJALI ENTERPRISES L6 | MAA SANTOSHI ENTERPRISES L5 | Vipul Construction L1 | THE LOTUS BUILDTECH L2 | M/S SIMRAN CONSTRUCTION CO L4 | Vee em Traders L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply only Stainless steel thali basket (11-13 division) of size 37cmx53.5cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 5873 or equivalent in IPSA/HETTICH ) | 10 | Each | 2,000 ₹20,000 | 1,800 ₹18,000 | 1,200 ₹12,000 | 960 ₹9,600 | 2,222 ₹22,220 | 900 ₹9,000 Lowest |
| 2.00 | Supply only Stainless steel basket (plain) of size 370mm x 535mm x 150mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved . (Make: Godrej Product Code 5851 or equivalent in IPSA/HETTICH ) | 20 | Each | 2,000 ₹40,000 | 1,800 ₹36,000 | 1,200 ₹24,000 | 960 ₹19,200 | 2,222 ₹44,440 | 890 ₹17,800 Lowest |
| 3.00 | Supply only Stainless steel Plate basket (11-13 division) of size 37cmx53.5cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved
(Make: Godrej Product Code 5872 or equivalent in IPSA/HETTICH ) | 20 | Each | 2,000 ₹40,000 | 1,800 ₹36,000 | 1,200 ₹24,000 | 960 ₹19,200 Lowest | 2,222 ₹44,440 | 999 ₹19,980 |
| 4.00 | Supply only Stainless steel Cutlary basket of size 37cmx48.5cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 6160 or equivalent in IPSA/HETTICH ) | 10 | Each | 2,000 ₹20,000 | 1,999 ₹19,990 | 1,500 ₹15,000 | 960 ₹9,600 | 2,222 ₹22,220 | 599 ₹5,990 Lowest |
| 5.00 | Supply only Stainless steel modular bottle pullout basket of size 150mm x 485mm x 430mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved (Make: Godrej Product Code 6169 or equivalent in IPSA/HETTICH ) | 10 | Each | 2,500 ₹25,000 | 2,490 ₹24,900 | 1,800 ₹18,000 | 960 ₹9,600 Lowest | 2,222 ₹22,220 | 999 ₹9,990 |
| 6.00 | S&F Telescope basket (channel) 450/ 600mm length of extruded MS galvanised rollers of approved quality | 20 | Each Set | 500 ₹10,000 | 790 ₹15,800 | 400 ₹8,000 | 260 ₹5,200 | 388 ₹7,760 | 99 ₹1,980 Lowest |
| 7.00 | Supply and fixing in repairs of Modular wardrobe,cupboards, cabinets, drawers , shelf, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete all as specified and directed by Engr-n-charge. (Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted) | 100 | Sqm | 7,000 ₹7,00,000 | 6,390 ₹6,39,000 | 5,800 ₹5,80,000 | 5,600 ₹5,60,000 Lowest | 5,666 ₹5,66,600 | 6,599 ₹6,59,900 |
| 8.00 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. | 5 | X Sqm | 100 ₹500 | 900 ₹4,500 | 50 ₹250 Lowest | 260 ₹1,300 | 133 ₹665 | 90 ₹450 |
| 9.00 | M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) over and 15mm thick screed beding layer in CM 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl fixing with adhesive in apropreat platform, complete all as specifed and dircted. | 50 | Sqm | 2,200 ₹1,10,000 | 1,690 ₹84,500 | 1,499 ₹74,950 | 1,960 ₹98,000 | 1,444 ₹72,200 | 900 ₹45,000 Lowest |
| 10.00 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted . | 80 | RM | 200 ₹16,000 | 154 ₹12,320 | 55 ₹4,400 Lowest | 160 ₹12,800 | 88 ₹7,040 | 90 ₹7,200 |
Tender Value
Refer Docs
EMD Value
₹85,369
Closing Date
5 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
ADDN/ ALTN OF KITCHEN AND TOILET OF MD ACCN AND CONNECTED B/R WORKS AT BAIRD PLACE UNDER GE (EAST) DELHI CANTT-10
2025_MES_739890_1
GE/DE-130/2025-26
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Cat a (i)/ Class D
9 documents required · 9 mandatory
₹500
GE (EAST) DELHI CANTT-10
₹85,369
Yes
9 Mar 2026
14 Nov 2025
8 Dec 2025
14 Nov 2025
5 Dec 2025
28 Nov 2025
Amount
Supply only Stainless steel thali basket (11-13 division) of size 37cmx53.5cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 5873 or equivalent in IPSA/HETTICH )
Supply only Stainless steel basket (plain) of size 370mm x 535mm x 150mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved . (Make: Godrej Product Code 5851 or equivalent in IPSA/HETTICH )
Supply only Stainless steel Plate basket (11-13 division) of size 37cmx53.5cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 5872 or equivalent in IPSA/HETTICH )
Supply only Stainless steel Cutlary basket of size 37cmx48.5cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 6160 or equivalent in IPSA/HETTICH )
Supply only Stainless steel modular bottle pullout basket of size 150mm x 485mm x 430mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved (Make: Godrej Product Code 6169 or equivalent in IPSA/HETTICH )
S&F Telescope basket (channel) 450/ 600mm length of extruded MS galvanised rollers of approved quality
Supply and fixing in repairs of Modular wardrobe,cupboards, cabinets, drawers , shelf, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete all as specified and directed by Engr-n-charge. (Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted)
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) over and 15mm thick screed beding layer in CM 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl fixing with adhesive in apropreat platform, complete all as specifed and dircted.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted .
S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long, complete all as specified and directed.
S&F 15 mm bore brass CP single lever Sink mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions, complete all as specified and directed.
S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.
S&F 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge.
S&F 15 mm bore brass CP single lever Basin mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed.
S&F in repair vitreous china wash basin over counter ovel type size 600x425x195mm jaquar, hindware or eqvilent fixed over granite slab with all fitting and fixture complete all as specified.
S&F in repairs 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.
S&F PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed.
S&F Vitreous china wash down water closet pan wall hung WC 2049 EWC Wall hung Ext. 'P" 655 x 390 x 745 mm cistern 2129 , shoft closed seat cover2356 and 2238 twin flush fitting of including flushing cistern and fixed with brass screw, complete all as specified and as directed. Make : Cera/ Hindware/ Jaquar.
S & F CP Toilet Paper holder with flap guard complete all as specified and directed.
S & F CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed.
S&F CP towel rail 600mm long complete all as specified and as directed by Engineer-in-Charge
S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge
S&F CP towel ring complete all as specified & directed.
S&F in repair for 15 mm dia fancy type CP Stop valves, Cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge .
S&F over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mm, complete all as specified and directed.
S&F C. P. Brass15 mm bore 2 way angel valve with wall flange complete all as specified & directed.
S&F Towel Rack with Lower Hanger (Stainless Steel) with hook.
S & F Corner Glass Shelf 300 x 300 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two Nos CP Railing in each set complete all as specified and directed.
S&F in repairs wall mixer 3- in - 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange with hand and overhand shower with all fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts,Hand shower 105mm dia round shape single flow with air effective(ABS body and Face plate chromium plated) with rubit cleaning system complete all as spd.
BLANK
M & L for non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over and incl 15mm thick screed bed in CM (1:6) incl dismantling floor, tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all specified and directed.
M&L for Glazed ceramic tiles coloured of size 450x350x7mm thick on vertical surfaces of walls such as skirting, dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendering in CM 1:4 incl dismantling floor, tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed.
M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bed in CM 1:6 incl dismantling existing tiles and removing tiles to defence land and rubbish off the permises, complete all as specified.
Description all as item No. 35 above but on vertical surfaces such as skirting / dados with and including 10 mm thick CM 1:4 as in backing coat complete all as specified.
Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed.
M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long, complete all as specified and directed.
M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.
M&L Resecuring or Easing and adjusting , without taking down shutters of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area not exc 2 sqm each complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified.
Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and as directed.
THE LOTUS BUILDTECH (BID ID -3489625)
Vee em Traders (BID ID -3488086)
M/S SIMRAN CONSTRUCTION CO (BID ID -3487868)
MAA SANTOSHI ENTERPRISES (BID ID -3490369)
M/S GEETANJALI ENTERPRISES (BID ID -3490351)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tender130.pdf
Tender Documents • 1.00 MB
BOQ_828477.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .