Beautification and Pedestrianization of Cafe Bhonsle Square in Panaji Goa

Amount

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Dismantling for existing Telephone pole and handing over serviceable material to IPSCDL

Demolition for existing Lamp Post and handing over serviceable material to IPSCDL.

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per MORTH specification 202, by mechanical means, bituminous courses.

Carriage and disposal of unserviceable material such as lime, murrum, building rubbish, earth, stone steps, tiles, pavers, excavated rock. Up to 10 km. By tipper truck including loading, unloading, stacking ,disposal ( All statutory approvals to be taken by the contractor)

Dismantling and reinstallation of existing Light pole with all the fixtures ( Light Fixture , CCTV camera and Etc.),the rate shall be including of all materials required and other related works etc. to complete .

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sq.M on plan) including disposal of excavated earth lead up to 50 m and lift up to 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in a: All kinds of soil.

Supplying and filling sand in plinth under floors, trenches including watering ramming consolidating, dressing, complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a. All works up to plinth level

Providing and laying in position (1:11/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) .a. All works up to plinth level

Laying stone soiling including packing with smaller stones and consolidation with road roller including spreading, watering and consolidating of binding material Murrum or earth etc.(payment to be made for quantity of only soling stone used excluding binding material).

Construction of granular sub-base by providing coarse graded granitic or basaltic material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401; for Grading III Material

Centering and shuttering including strutting, propping etc. and removal of formwork for : Foundations, footings, bases for columns and mass concrete.

Providing corrosion resistant steel CRS-50 bars of (Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member .

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating Each layer ramming and watering lead up to 50 M and all lifts and disposal of surplus earth as directed by Engineer

Spreading the earth/hard soil in layers not exceeding 250 mm in depth breaking clods, watering rolling Each layer with half ton roller or wooden or steel hammers and rolling every third and topmost layer with power toller of minimum 8 tonne and dressing up in embankment for roads, flood banks, marginal and guide banks and filling up of ground dressing etc. complete.

Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 KG/ cm2. a. In Foundation and plinth.

15mm cement plaster 1: 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. .a. Jet Black (P1a, P2a, P3a the shade and the colour to be approved by the Engineer)

Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks (C.C. paver blocks) of M35 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. .d. 80 mm thick with Grey colour (P8, P9 & P10)

Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet black with mirror polish) 20 mm thick.

Providing and fixing coloured ceramic tiles Spartek or equivalent of 8" x 8" size and 6 mm thick in skirting and dados on 12 thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. (Drg-No-PAN-ACM-LS-TEN-DLT-1602)

Supply and planting Shrubs of height, spread and growth as per specifications, for understorey planting (low hedge @ 50cm to boundary of planter) in 20cm container size and >30cm height, plants must be healthy showing multiple branches with consistent signs of growth and free from disease. Apply a slow release fertiliser at time of planting. (20 plants per sqm) with various species.

Supply and planting Ground Covers and seasonal in 15 cm container size (seedlings of hybrid varieties), planting inside hedgerow. Plants must be healthy showings consistent signs of growth and free from disease. Apply a slow release fertiliser at time of planting.

Supply and installation of Tree, 3M height overall, clear trunk height1.5m-2.5m, canopy width 50-80,calliper,straight trunk & balanced canopy.

Bambusa variegated

Terminalla Ctappa

Ficas microcarpa

Plumeria red

Supply and installation of external free standing Litter Bins B1 having size of 425(D)X806(W)X770(H), of Capacity 90L refer to Cost to include all fixings i.e. screws, bolts, washers etc. to complete. Design to be as approved by Engineer prior to fabrication or procurement. All works to be to completed to the satisfaction of the Engineer.

Supply and installation of SS202 Tree grating of size 900mm x 900mm and 1200mm x 1200mm, the rate shall be including of all materials, labours, transportations, lead and lift and all work to be completed as per the instruction and satisfaction of Engineer.

Supply and fixing of drain Cover Made of GI Steel grating as per design, specifications and drawings, with all lead & lift for all materials & labour and as directed, at all heights & locations.

Supply and installation of FRP planter box ,the rate shall be including of all material labour and other related works etc. to complete as per the architect drawing and Engineer direction 600mm x 300mm x 300mm

Painting three or more coats with acrylic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. For FRP Planter Box

SG1 Place Marker Signage- Providing & Fixing Corten steel A- 588 of 10mm thk, Natural colour & smooth finish on Each surface of concrete signage post of size 300Wx1800HX200mm. 10mm thk SS316 Plate of size 300x1200mm with letters Etched in Jet Black colour (RAL 9005) of size 300mm x 1200mm to be mounted flushed on Corten steel with SS Countersunk Screws of 12mm dia.as per the detailed drawings and specifications etc. complete.

SG2 Directional Signage -Providing & Fixing Corten steel A- 588,10mm thk, Natural colour & smooth finish on Each surface of concrete signage post of size 400Wx1450HX200L mm. 10mm thk SS316 Plate of size 400x1100mm with letters Etched in Jet Black colour (RAL 9005) of size 300mm x 1200mm to be mounted flushed on Corten steel with SS Countersunk Screws of 12mm dia.as per the detailed drawings and specifications etc. complete.

Supply & Installation of Prefabricated FRP planter of size 1000mmx300mmx300mm

Supplying and fixing Pre-cast cement concrete kerb-stones (factory made, the factory should be ISO certified and registered under Directorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical platform and vibrators with smooth finish including fixing at site complete as per specification. .a. Size 30 cm L x 50 cm H x 15 cm T

Providing & fixing of 100mm dia vertical post with 100mm dia Horizontal post welded as per the drawings including fixing of SS304 wire rope of 4mm dia fixing as per the details for lantern fixing.

Supply and erection of HDGI 6 mtrs long Octagonal pole made up of 4mm HDGI plate with PU paint, pole entry at the bottom of the pole, heaving weight not less then 97 KG, Single over hang GI pipe of 0.5mtr with an angle of 15 degree

Supply of 80W ± 10 % and 1-10V Analogue Dimmable driver with top Maintainable LED Street Light luminaire. System efficacy of more than 130 lm/W. LED Street Light shall be made up of Die Cast aluminum housing suitable to mounted on 40-60 mm OD bracket arm. Luminaire shall have two separate compartments for LEDs and driver and both compartments should be hermitically sealed to achieve IP 66 ingress protection. Optical compartment shall be provided with polycarbonate cover with lens to withstand IK 10 impact rating, while control gear shall be provided with die cast aluminum cover for safety. LM 80-08 compliant, LEDs from reputed makes such as Nichia, Japan / Cree, USA / Lumiled USA / Citizen Japan / Osram Germany / Seoul Korea / Bridgelux USA should be provided. LEDs used in the product shall comply with :manufacturer for minimum 5 year. LEDs shall be of EMC /Ceramic Package with 1W to 5W capacity and shall be driver at 90% or lower wattage than maximum rated. LEDs used shall have maximum allowed junction temperature of 150 Deg C with actual operating junction temperature not more than 100 Deg C at an ambient temperature of 35 Deg C. The LENS used shall have optical grade Polycarbonate to provide street light distribution for Uniform lighting. LED optical lens should be properly fixed to 1.6mm thick MCPCB and should not be only fixed by glue. LED optical lens shall have temperature withstand capacity of 125 Deg C and Transmissivity of more than 90%.The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs. tested at maximum current and at 105 Deg C case temperature (Complete LM 80 test report for LED should be submitted for 10000 hrs. of testing). The LEDs used in Street Light should be Mac Adam Step 5 standard Rated LED with CCT of 5700 K and CRI of Minimum 70. Maximum permissible driving current of LEDs are from 0.15A to 1A. Actual Driving Current of LEDs shall be less than 1000mA for life long reliability. LED Driver should be BIS Registered and shall be Isolated type, Constant Current topology driver in metal enclosure with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 4KV internal surge protection in both Common Mode and Differential Mode. LED Driver shall be potted type. Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. LED driver shall have output short circuit & over voltage withstanding protection inbuilt. Luminaire shall be external SPD of 10KV. Compatibility report of SPD and Driver shall be submitted during inspection.

Supply,installation,Testing and commissioning of 12V, 12W/m Flexible LED Strip Lights, IP-68 type, with driver and all accessories required for installation including Aluminum Channel for Led Strip Light with Milky White Curved Diffuser Cover, End Caps, and Mounting Clips, Right Angle Aluminum Profile, V-Shape

Supply,installation,Testing & commissioning of outdoor type IP-68, 6W LED hanging Lanterns - Custom made of 2 mm thick Ceramic material and adopt leaf shaped hollow out design enclosures in different colours, size of 10-12’’H X 7’’Diameter , with Hanging chain size of 10”H including 6W outdoor string LED light (Philips/Havells) with required driver and all accessories. The enclosed image is design intent only and client approval is must require prior to procurement of the item.

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I) with latest amendments of following size - 3 Core 2.5 Sq.Mm (from feeder pillar to light fixtures)

Supply and making cable end terminations with Copper lugs for following sizes of PVC insulated PVC sheathed/XLPE Copper conductor cable of 1.1 KV grade, complete as required. - 3 Core 2.5 Sq.Mm

Supply of 2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.. - 2 Core 2.5 Sq.Mm (from junction box to light fixtures for LED light)

Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. - 2 Core 2.5 Sq.Mm

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a)Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b)Class B GI pipe, 40mm diameter as per specifications. c)Charcoal/salt as per specs ( paid separately). d)Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e) Masonary chamber with proper foundation, cover plate and locking arrangement. f)Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement (plumbing (a)- In soily strata).

Supply, Installation, testing & commissioning of Feeder Pillar with energy meter, outdoor type (IP54) Single door with rain protection canopy made out of 14 G CRCA sheet, powder coated, complete with Incomer of 63Amps 4 Pole MCB ,with 25Amps DP Contactor with timer, 3 no's sub incoming of 30mA 25Amps DP RCCB with 18 number of 10 Amps SP MCB outgoing as per schematic drawing.

Supplying and fixing of 25 mm sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 32 mm sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. - '4 Core 25 Sq.Mm (From GED panel to Proposed Feeder Piller)

Supplying, of HDPE pipes at store or site of work including loading unloading, stacking, transit insurance etc. complete bearing ISI mark & conforming to IS: 4984-1995 & made from PE 100 resin Class IV (10 KG/cm2). - 110 mm

Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 Sq.Mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer, sand cushioning with screened sand bed of 20mm thick, protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 Sq.Mm on surface, etc. complete as required

Supply & fixing of weather proof thermoplastic Junction box (IP65 ) for External Lighting area, complete as required with grommets, & connectors.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (6) 4 x 25 Sq. mm.

Supply and installation of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I) with latest amendments of following size - '4 Core 4 Sq.Mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminum conductor cable of 1.1 KV grade, complete as required. (3) 4 x 4 Sq. mm.

Supply ,installation and making good for existing telephone cable if damaged while construction , the rate shall be including of all materials, labours and other assosories and other releated works etc to comple for operation as per the engineer instruction

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer. Internal work exposed on wall (Medium duty SDR 13.5 pipe). c. 25mm CPVC pipe

Conveying carefully from stack at sites 250m from both the sides rolling and lowering into trenches, laying, jointing G.I. Pipes with G.I Fittings of sizes given below true to line and level including fixing sockets, elbows tees bends, gland packing and other fittings with cutting and threading as required including hydraulic testing. etc complete. c. 25mm CPVC pipe

Supply of Domestic Water Meter, horizontal inferential, Multi Jet type with magnetic drive and dry dial suitable for ambient 50 degree C temperature duly sealed against tampering complete with couplings at both ends and conforming to Class B as per IS 779/1994,(Reaffirmed:2004)with amendments 1 to 5 with ISI mark along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labours with ISI mark with Plastic Cover & Brass Body- 25 Dia

Supply and fixing of Brass Ball cock of 25mm dia

Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 10 KG/sq.cm. Outer Dia in mm

Ninety(90)

One Hundred and Ten (110)

One Hundred and Sixty (160)

Two Hundred (200)

Rajson Engineering Services Private Limited