Karnataka

AOC

Works

Buildings

Construction of a new Zilla Panchayat building next to Hassan Zilla Panchayat, Hassan Taluk, Hassan City

Rural Development and Panchayat Raj Department

RDPR Division Office Hassan | Karnataka

Amount: ₹1.3 CrCloses: 24 Feb 2026Closed

Timeline

Published17 Feb 2026
Closed24 Feb 2026
Awarded—

Bids

1 Bid24 Feb 2026

#	Company	Amount	Status
1	CHANASYA KARLE INFRATECH PRIVATE LIMITED ₹1.3 Craccepted-aoc	₹1.3 Cr	accepted-aoc

Tender Value

₹1.3 Cr

EMD Value

₹2 L

Closing Date

24 Feb 2026, 9:34 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

supreetha

Office Number

Work Description

Construction of a new Zilla Panchayat building next to Hassan Zilla Panchayat, Hassan Taluk, Hassan City.

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT24612

Reference Number

RDPR/2025-26/BD/WORK_INDENT24612

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Hassan

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredThe Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.55.54 Lakhs in any one year.

RequiredVALID KPWD REGISTRATION CERTIFICATE AS CLASS 3 & ABOVE CONTRACTOR ONLY

RequiredThe Contractor should have satisfactorily completed as prime contractor, atleast One Similar work such as Construction of Building works Consisting of Providing AC Work, and Providing Fire Fighting Works the Total value of work not less than Rs. 65.88 lakhs than Percent of the amount put to tender in any one of the Last Five Financial Years from 2020-21 to 2024-25 of Rs.65.88 Lakhs in issued by not below the rank of Executive Engineer

RequiredThe tenderer must have achieved in at least two financial years in the last five financial years 2020-21 to 2024-25 an average Annual financial turnover of Rs.263.52 Lakhs.Certificate should be in the prescribed form as in section 3.1.2 of KW4 TURNOVER CERTIFICATE CERTIFIED BY CA With UDIN NUMBER ALONG WITH PROFIT AND LOSS STATEMENT WITH IT RETURNS

RequiredThe liquid assets and availability of credit facilities The contractor shall furnish the Unconditional liquid assets and or availability of credit facilities of not less than Rs.65.88 lakhs .letter of credit from Banks for meeting the fund requirement etc. Usually the equivalent of the estimated cash flow for the three months in peak construction period in the prescribed form as in KW4 .Section 3.1.10 Format Attached in Instruction to Bidder

RequiredWork done Certificate in respect of quantity Executed in any 1 Finacial year of the last 5 years 2020-21 to 2024-25 the following minimum quantities of work 1. M.S Grill-6580.00 kg, 2. Tubular Truss Steel Work-6954.00 kg, 3. Aluminium Composite Panel-254.00 sqm, 4. False Ceiling-309.00 sqm Should be obtained from not below the rank of Executive Engineer

RequiredInformation on works for which Tenders have been submitted and works which are yet to be completed as on the date of this tender as in KW4

RequiredGST, PAN CARD AND OTHER ADRESS PROOFOF THE AGENCY

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

ALL TERMS AND CONDITIONS ARE AS PER BID DOCUMENT AND NOTIFICATION.

Contractor Should Obey All KW-4 Conditions

Contractor Conditional tenders are not accepted Condition

The cost of the Tender processing fees shall not be refundable Condition

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without assigning any reasons Condition

All the items in the tender are inclusive of cost and conveyance of all materials, all lead, lift, loading, unloading, transportation, labour, hire charges of machinery, curing for concrete works Condition

Acceptence/Cancellation of the tender are reserved by under signed without any reasons for the same

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately

This work should be Inspected by the 3rd party Agency

Any damage during the progress of work, the damage cost should be beared by the Contractor

In the case of the death of the contractor after executing the agreement/commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders

Corrigendum will be published in the web site/News Paper for all modifications/corrections if any

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

If the date mention above happen to be general holiday next working day will holds good in lieu of the date mention

The bidder shall quote rates without adding GST for either materials or works contract or service GST payable by the bidder under this works contract will be paid to the contratctor over and above the bidders bid amount. and the increase in the GST shall not be paid in the extended period of contract for which the bidder alone is responsible for delay asdetermined by the authority

THE BIDDER BID CAPACITY should be equal to or MORE THAN TENDER VALUE

The materials Quality control certificates from the authorized quality control laboratories to be provided by the contractor before using the materials and Quality control certificate issued from the QC authority must accompanied with bill

THE WORK INDENT NUMBER SHOULD BE MENTIONED IN THE WORKDONE CERTIFICATE UPLOADED. OTHERWISE BID MAY BE REJECTED WITHOUT EVALUATION

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.55.54 Lakhs in any one year.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

TENDERER SHALL OBTAIN THE WORK DONE CERTIFICATE OF SIMILAR NATURE OF WORK 50 PERCENT OF THE AMOUNT PUT TO TENDER SUCH AS Construction of Building works Consisting of Providing AC Work, and Providing Fire Fighting Works OF RS 65.88 LAKHS EXCLUDING GST FROM LAST FIVE YEARS (FROM 2020-21 TO 2024-25) IN THE PRESCRIBED FORMAT SECTION 3.1.3 KW4 FROM THE COMPETENT AUTHORITY NOT BELOW THE RANK OF EXECUTIVE ENGINEEROR DISTRICT LEVEL OFFICER ALONG WITH THE INDENT NUMBER/ AGREEMENT/WORKORDER COPY AND SCAN THE ORIGINAL CERTIFICATED AND ATTACH THE SCANNEDFILE TO THE TENDER. THE ORIGINAL CERTIFICATE SHALL BE PRODUCED AT THE TIME OF OPENING OF TENDERS

Work Done Certificate

The Work done Certificate in respect of quantity executed in any One of last five financial year that is 2020-21 to 2024-25 for a continuous period of 12 months the minimum quantities of annual requirement for the works as per clause3.2c 1) M.S Grill-6580.00 KG, 2)Tubular Truss Steel Work-6954.00 kg, 3)Aluminium Composite Panel -254.00 sqm 4)Flase Ceiling-309.00 sqm Should be obtained from not below the rank of Executive Engineer

Others -- Quantities

Capabilities of Vendor

THE TENDERER SHOULD SUBMIT THE REGISTRATION CERTIFICATE ALONG WITH THE APPLICATION. (SHOULD BE ENROLLED AND RENEWED IN KPWD AS CLASS 3 & ABOVE CONTRACTOR ONLY)

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

The tenderer must have achieved in at least two financial years in the last five financial years 2020-21 to 2024-25 an average Annual financial turnover of Rs.263.52 Lakhs.Certificate should be in the prescribed form as in section 3.1.2 of KW4 TURNOVER CERTIFICATE CERTIFIED BY CA With UDIN NUMBER ALONG WITH PROFIT AND LOSS STATEMENT WITH IT RETURNS

Audited CA Certificate of Annual Turnover

The liquid assets and availability of credit facilities The contractor shall furnish the Unconditional liquid assets and or availability of credit facilities of not less than Rs.65.88 lakhs .letter of credit from Banks for meeting the fund requirement etc. Usually the equivalent of the estimated cash flow for the three months in peak construction period in the prescribed form as in KW4 .Section 3.1.10 Format Attached in Instruction to Bidder

Line of Credit

Others

Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this tender as in K/W-4 (section 3: 1.5) A)Existing commitments and on-going works. B)Works for which Tenders already submitted.

Others -- Existing works

Others -- Sub-Contract

GST, PAN CARD AND OTHER ADRESS PROOFOF THE AGENCY

Others -- GST, PAN CARD AND OTHER ADRESS PROOFOF THE AGENCY

Work Locations

Fee & Financial Details

Tender Fee Amount

₹3,300

EMD Fee Amount

₹2 L

Important Dates

Last Activity

24 Feb 2026

Published

17 Feb 2026

Bid Opening

25 Feb 2026

Download Ends

23 Feb 2026

Pre-Bid Meeting

19 Feb 2026

BOQ Preview

•

Construction of a new Zilla Panchayat building next to Hassan Zilla Panchayat, Hassan Taluk, Hassan City

•

Civil Works BF GF MF 1F AND TF Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specifications including setting out, shoring, stru...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc including priming coat with approved steel primer all complete Fixed to steel wi...

•

Supplying and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on sp...

•

Providing and laying Polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm...

•

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes channels plates etc including welding grinding buffing, polishing and making curvature wherever required and fitting the sam...

•

Providing fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I. ...

•

Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting, hoisting fixing in position and applying a priming coat of approved ...

•

Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed...

•

Providing and constructing un-reinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 M20 Gradecoar...

•

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for BrickRccstone walls coloumnsbeams with necessary aluminium frame works at required level made out o...

•

Providing and fixing double scaffolding system cup lock type on the

•

exterior side of buildingstructure upto 25 metre height above ground

•

level including additional rows of scaffolding in stepped man...

•

Providing fixing 10 mm thick plaster of Paris gypsum anhydrous ceiling up to a height of 5 m above floor level over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with ...

•

Providing Fixing of High Acoustical False Ceiling having NRC Noise

•

Reduction Coefficient 0.90 minimum using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calcium Silicate False ...

•

Providing and placing on terrace polythylene water storage tank with cover and suitable locking arrangements and making necessary holes for inlet out let overflow pipes but without fittings base suppo...

•

FIRE FIGHTING WORKS Supplying fixing testing and commissioning of butterfly valve of PN 1.6 rating with bronzegunmetal seat duly ISI marked complete with nuts bolts washers gaskets conforming to IS 1...

•

Supply Installation testing and commissioning of approved make heavy quantity CLASS C confirming to as per IS1239 Such as Tees elbows check nuts unions Flanger Nipples etc including cutting welding Tr...

•

Supply Installation testing and commissioning of approved make heavy quantity CLASS C confirming to as per IS1239 Such as Tees elbows check nuts unionsFlanger Nipples etc including cutting welding Tre...

•

Supply Installation testing and commissioning of approved make heavy quantity CLASS C confirming to as per IS1239 Such as Tees elbows check nuts unionsFlanger Nipples etc. including cutting welding T...

•

Supply, Installation testing and commissioning of approved make heavy quantity CLASS C confirming to as per IS1239 Such as Tees elbows check nuts unions Flanger Nipples etc including cutting welding,...

•

Supply Installation testing and commissioning of approved make heavy quantity CLASS C confirming to as per IS1239 Such as Tees elbows check nuts unions Flanger Nipples etc. including cutting welding,...

•

Supplying Installing testing and commissioning of approved make 15mm dia sprinkler bulb pendent wall mounted type designed to operate 68 degrees centegrad FIRE complete Colour code of bulb liquid insi...

•

Supplying installation testing commissioning of sprinkler flexible pipe UL Listed of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 87...

•

Supply Installation testing Commissioning of conventional type photoHeat electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC The Optical Smoke Detector is unaffected by wind or...

•

SITC OF Fault isonation moduleSupply Installation Testing Commissioning of Analogue Addressable loop powered Sounder Beacon with inbuilt isolator and having Min 15 distinct sound patterns multitone t...

•

Supply install test and commissioning of Analogue addressable Manual Call Point Resettable Type with inbuilt isolator and LED indicator designed for IP44 requirements and approved to operate in 10C to...

•

Supply intallation testing and Commissioning of 2C 1.5 sq mm armoured FRLS cables in celing with suitable clamps and screws RED colour etc complete with all lead lift as per specifications and as per...

•

Supply install test and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character 240X64 Pixel 7inch Touchscreen graphic LCD ...

•

AC WORKS Supplying, Erecting Testing commissioning package type Duct able type split AirConditioner with microprocessor control fitted with twin scroll Compressor with R22Latest Refrigerant The unit s...

•

Supply installation of 5 8 and 7 8 Hard drawn refrigerant pipe and insulation suitable for 11TR duct able split Air Conditioner Including lead and lift Incharge of work

•

plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes fittings with one step CPVC solvent cement Including lead and lift Incharge o...

•

Supplying filling refrigerant for air conditioning

•

equipments Which includes the labour Nitrogen gas for pressure

•

and leak testing Including lead and lift Incharge of work

•

Supply fabrication and installation of GI Ducting Along with flanges

•

supports all fixing material 24Gauge Including lead and lift Incharge of work

•

Supply fabrication and installation of GI Ducting Along with flanges

•

supports all fixing material 22Gauge Including lead and lift Incharge of work

•

Supply and installation of Thermal insulation using 13mm nitrile

•

rubber for return air ducts Including lead and lift Incharge of work

•

Supply and installation of Tarpaulin canvas between the AC duct and

•

AC evaporator unit including accessories Including lead and lift Incharge of work

•

Supply and fixing of powder coated extruded aluminium grill suitable

•

for supplreturn air including all fixing hardware etc Complete 6 extruded aluminium grill with 15 deg to 30 deg louvers Including l...

•

Flexible Duct Per Mtr Including lead and lift Incharge of work

•

Aluminium Diffusers Including lead and lift Incharge of work

•

Collar Dampers Including lead and lift Incharge of work

•

Extra for Fabrication supply and fixing of Stand fabricated using

•

slotted angle L angle of size 6mm x 50mm for mounting out

•

doorindoor A.C. unit Batteries Including lead and lift Incharge of work

•

Supplying and commisioning of AC Remote Including lead and lift Incharge of work

•

Electrification works Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Br...

•

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in BrickStoneCC wall 3Way In...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etccomplete on the existing metalP...

•

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way Switch Including lead and lift Incharge of work

•

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 129 6Amps 3way socket Including lead and lift Incharge of work

•

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch Including lead and lift Incharge of work

•

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Including lead and lift Incharge of work

•

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch Including lead and lift Incharge of work

•

Supplying Fixing of switch mounting rack with power manager Cable manager as per standard specification 9U with 450mm depth Including lead and lift Incharge of work

•

Supplying fixing of Network Switches 16 port 10 100 1000 Switch Including lead and lift Incharge of work

•

Supplying fixing of mtrs Cat 6Patch Cable 1Mtr Including lead and lift Incharge of work

•

Supplying and fixing regular MCB distribution boards on wallwood board I flush mounting using required clamps i bolts nuts etcwith provision for fixing suitable type capacity MCB single phase I...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and Type curve indicator ON OFF energy cross-3 with Short circuit breaking ...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials andType curve indicator ON/OFF energy cross-3 with Short circuit breaking c...

•

Supplying, fixing and wiring Residual current Circuit Breaker RCCB240/450Vup to 300mA sensitivity on existing woodpanel board 32-40 Amps 4 pole Including lead and lift Incharge of work

•

1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 Part 1or IS7098 Part-1 Armouring strip thickness and resistivity as per IS-3975 4 core16 sqmm In...

•

1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1or IS-7098 Part-1 Armouring strip thickness and resistivity as per IS-3975 3.5 core70 sqm...

•

1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1 or IS-7098 Part-1 Armouring strip thickness and resistivity as per IS3975 3.5 core 95 sq...

•

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm Including lead and lift Incharge of work

•

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm Including lead and lift Incharge of work

•

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KVclass metal only 25mm dia Including lead and lift Incharge of work

•

Supplying and fiixing of heavy duty cable glands suitable for UG cable of1.1 KV class metal only 40mm dia Including lead and lift Incharge of work

•

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 25 sqmm Including lead and lift Incharge of work

•

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes70 sqmm Long Barrel Including lead and lift Incharge of work

•

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 95 sqmm Long Barrel Including lead and lift Incharge of work

•

Supplying fixing and wiring earth electrode for grounding of lifts transformersDG sets etc using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on th...

•

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required 25x3mm GI strip Including lead and lift Incharge of work

•

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required25x3mm GI strip 25x6mm Copper strip Including lead and lift Incharge of work

•

Supplying and running of GICopper strips for grounding connections using necessary fixing materials as required 25x3mm GI strip 600x600x3mm Copper plate Including lead and lift Incharge of work

•

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 230.0076 twin twisted PVC insulated wires required Nos of ...

•

FLOOR PANEL Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mountingfully weather proof with provision for better heat dissipationprovided with hinged front cover ...

•

Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve mounted on phenoliciFRPDMC insulator which ...

•

Supplying and fixing angle iron frame work iabricated out of M.S angle iron and M.S flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6m...

•

Supplying and fixing angle iron frame work iabricated out of M.S angle iron.and M.S flat with bolts washers etcand painted with 2 coats of red oxide and then two coats of approved paint 50x100x5...

•

Supplying and fixing Moulded Case Circuit Breaker MCCB overthe existing woodpanel board using necessary screws bolt nuts necessary phase separators handle and wiring complete Protection of Overlo...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ON/OFF energy cross-3 with Short circuit brea...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution board using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit breaking c...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage Current frequency Power power factor KVA KWHKVAR suitable for 3 phas 4 wire LTnetwork with IP 54 de...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC50 Hz 1224v DC Including lead and lift Incharge of work

•

Supplying fixing and wiring 50 5 to 400 5Amps 15VA burden Current TransformerClass 0.5 accuracy with Tape Woun Including lead and lift Incharge of work

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-4-Bid-Document.docx

Tender Document • 0.81 MB

INDENT 24612.pdf

Others - Estimate • 3.24 MB

KW-4 Conditions.xlsx

Instructions to Tenderers • 0.01 MB

Tender-Notification-23.doc

Others - Tender Notification 23 • 0.10 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

CHANASYA KARLE INFRATECH PRIVATE LIMITED

₹1.3 Craccepted-aoc