PROVN OF CERTAIN LBW REV AND MINOR WORK IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in base finishing the surface even and smooth complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Vitriefied ceramic tiles 10mm thick DARK SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm over and including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately) complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in CM 1:6 finished fair& even surface complete all as specified and directed.

Cutting chases, pinning in. through brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for French polishing on old wooden surfaces of any size including cleaning and preparing the surface including a coat of wood filler on old works with two coats complete all as specified and directed.`

Taking down Shutters of any description n exc 1 sq. m each removing to or from store complete all as specified and directed.

Taking down Shutters of any description but exc 1 sq. and n.exc 2.0sqm each removing to or from store complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick second class hard wood factory made panelled door shutters (any number of pannels) with panels of timber flat on both sides (feather edged) or of veneeved particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick second class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into squars with plain chamfered or rounded mitred and rebated sash bars any numbers and fitted to chowkats as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S & F 35 mm thick flush door shutter, solid core construction with block board core and ply wood face panels commercial type on both side complete all as sapecified and directed.

S&F 1mm thick wood grain printed PVC sheet fixed or laid on to flush doors by using rubber used adhesive, supplying & fixing at site complete all as sapecified and directed.

S& F Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wall Mixer three in one including Provn of OH shower and hand shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wash Basin Mixer for hot & cold water with long shank and fly nut complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Sink Mixer for hot & cold water with long shank and fly nut complete all as specified and directed.

Supply & fixed in repair Towel Rack 600mm long with lower hangers (Cat Part No. AHS 1581 of Jaquar make or equivalent complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

S&F in repair Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat black of size 550x 400 mm (excluding taps), waste, chain and plug including brackets complete all as specified and directed.

S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia, 450mm long etc complete all as specified and directed.

S&F in repair 15 mm dia bib taps cast copper alloy with Chromium plated cruch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore dia angular stop valves chromium plated fancy type, long shank, screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed .

S&F in repairs stop valves 15mm , cast copper alloy , fancy type chromium palted screwed down , high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

Supply & fixed in repairs PVC connection 15 mm size , 450mm long with PTMT adopter,check nuts and washer on both sides complete all as specified and directed.

Supply & Fixed in repairs Corner Glass Shelves complete all as specified and directed.

S&F in repair jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

S&F in repair chromium plated, Toilet paper holder complete all as specified and directed.

Supply & Fixed in repairs over head Shower150X150mm square shape single flow, chromium plated with Gray face plate complete as specified and as directed.

Supply & Fixed in repairs shower Arm complete as specified and directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed.

Ditto all as per above item but re - fixing only (materoal obtained from item no. 52) complete all as specified and directed.

S&F Curtain rod 19mm dia fancy type mild steel chromium plated fixing with brackets (Rates included for brackets also) stop etc complete all as directed.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

M&L for Hardcore of Broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, sub base complete all as specified and directed.

M & L for 100mm thick Cement concrete type B-2, 1:2:4, using 40mm graded stone aggregate as in hardstanding complete all as specified and directed.

S&F Machine pressed precast concrete interlocking coloured paver block rubberised any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over and including sand coushioning 50mm thick etc complete all as specified and directed.

M&L for precast cement concrete blocks 1:2:4 Type B-I (20mm graded stone agg) as in curb stone set in CM 1:6 complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc including taking down of GI pipe 15mm dia complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings including taking down of GI pipe 20mm dia etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 25mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings including taking down of GI pipe 25mm dia etc complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.

M&L for coloured high abrassion resistance tiles 10 mm thick of size 300 x 300 mm of terracota shade (square/rectangular) of make Johnson Enduara conforming to IS -4457 2007, in floors, open areas, terraces, open verandahs etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge. Make : (Industrial) of Johnson Endura or equivalent.

M&L for applying 2mm thick wall care Putty in two layers on old surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of oil bound distemper over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over 1mm thick birla wall care putty over chalk whitining on walls complete all as specified and directed.

M&L for Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of weather proof paint (weather coat) over a coat of birla wall care weather putty (for external surfaces) over a coat of primer on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of birla wall care weather putty (for external surfaces) over a coat of primer on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal existing treatment and applying two coat of cement base paint over a coat of birla wall care weather putty (for external surfaces) over a coat of primer on walls complete all as specified and directed.

S&F looking mirror of size 5 feet X 3.5feet with designer glass and frame to be fitted with wall including all necessary arrangements and fittings complete all as specified and directed.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and directed by Enigneer in charge

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and directed by Enigneer in Charge

S&F stainless steel kitchen basket in various type of basket , plaint basket height , 4" Thali basket 8" height Cup saucer 4" heigt and perforated cutlury basket 4" height all as specified and directed.

S&F hattich chennel for basket sizes 46mm wide complete all as specified and directed.

S&F stainless steel hinges for cupboards of senso (as per 3D designs) inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F 18mm thick ply, PVC sheet prelaminated on one side of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exceeding 1.5mtr depth for foundation in any type of soil & getting out.

Excavation over areas exc 1.5m depth and n exc 3.0 m depth for foundation, soft/loose soil complete all as specified and directed.

Supply and laying Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Returning filling in incl spreading, levelling, watering & well ramming in layers not exc 25cm thick for soft/loose soil complete all as specified.

Removing excavated material 250 m but n.exc 50m and depositing where directed at a lavel .exc 1.50 mtr above the starting point.

M&L for RCC Design mix M-25 using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC Design mix M-25 using 20mm graded stone aggregate in Beams, cantilevers, bressummers, over 1.5m span complete all as specified and directed.

M&L for RCC Design mix M-25 using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC Design mix M-25 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for use and waste of formwork flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for Use and waste of formwork rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for Use and waste of formwork rough finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F TMT bars 10mm dia & over cut to length, bent to shape required incl cranking bending with0.9 mm dia MS wire (annealed) not less than0.9 mm dia or securing with clips.

Ditto all as per above items but 5mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders.

M&L for 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all as specified and directed.

M&L for 75 mm th PCC 1:4:8 type D2 ( Using 40 mm graded stone agg.)as in sub base of floors.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

S&F factory made steel windows or ventilators with top hung shutter including hinges, steel peg stay, glazing bars including mild steel framed work such as grill gratings with ends of bars , spikes framed guard bars and similar workj confirming to Fe 290 Gde E-165applying one shop coat of red oxide primer complete all as specified and directed

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) including applying one shop coat of red oxide primer complete all as specified and directed

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or backinlet and integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc complete all as specified and directed (Make: PRAYAG / CERA/ Parryware)..

S&F vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed(Make: PRAYAG / CERA/ Parryware/Jaquar).

S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia, 450mm long etc complete all as specified and directed (Make: PRAYAG / CERA/ Parryware/Jaquar).

S&F vitreous china wash basin white flat black of size 550x 400 mm (excluding taps), waste, chain and plug including brackets complete all as specified and directed(Make: PRAYAG / CERA/ Parryware/Jaquar).

S& F 500 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule complete all as specified and directed.

S& F brass chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed (Make: PRAYAG / CERA/ Parryware/Jaquar).

S&F Bib taps, cast copper alloy CP with crutch butterfly handle, screwed down, screwed for iron pipe 15mm & complete all as specified.

S&F Stop valve15mm bore fancy type, CP with long shank and cup (concealed) type screwed both ends for iron pipe or for unionand fixed

S&F Stop valve15mm bore cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed all as specified .

S&F Ball brass valves, high pressure with polyethene float & fly nut complete screwed for iron pipe 20mm &or brass ferrule complete all as specified.

S&F PVC connecting 15mm size with PTMT nuts of length 450 mm.

S&F Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of dia 15mm and fixed complete all as specified and directed

S&F CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1.

S&F GI tubes medium grade with all fittings & fixed for 15mm GI pipe complete all as specified.

Ditto -- but 20mm GI pipe.

S&F SGSW gully traps ,square or round mouthed type P 150mmx 150mm all as specified.

M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 mix, type C-2 using 40mm graded stone aggregate as in plinth portection, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastering surfaces of walls and applying two coats of cement base paint over one coat of cement primer complete all as specified.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

Cutting into existing manhole for connecting new drains,making good to 150mm bore pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 sec) in CM 1:2:4 type B1 smooth finished and reforming benching as requied.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement. (Note:- Forming fair finished channel shall be measured and paid for separately).

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds mitred/stopped ends etc complete.

M&L for Concrete bed to drain pipes for 150 mm dia pipe in PCC 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Supply & Fixed in repairs chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangement with connecting legs, wall flannges and wall brackets for hand shower (code CQT-23267 of Jaquar make or equivalent make as approved by GE complete as specified and as directed.

Supply and fixing shower panel (Size 1600 X 230mm) of chrome plated stainless steel finish, anti finger print, movable ABS top shower, brass waterfall, movable ABS body massage jets, chrome plated ABS hand shower, brass spout, brass faucet body with thermostat mixer, multi function water diverter for top shower, water fall, hand shower body jets, spout, 40cm stainless steel braided hose, 1.50mtr stainless steel double locked flexible hoses of make : Jaquar (Shinny : JPL-SSF-ST8896) including all fixing arrangements complete all as specified and directed.

Supply and fixing wall to wall shower enclosure with two fixed glass and openable door in between-3 part made up of 8mmthick glass and chrome finish including handles and all fixing arrangements of Make:- Jaquar (Model :1830-G: JSE-CHR-830G1216H19X) height of glass closure is 1950mm and width 2401mm-2800mm complete all as specified and directed.

Supply and fixing corner shower enclosure with two fixed glass and openable door fixed on the front panel-3 part, made up of 8mmthick glass and chrome finish including handles and all fixing arrangements of Make:- Jaquar (Model : 1840-G: JSE-CHR-840G2224H19X) height of glass closure is 1950mm and width 2001mm-2400mm complete all as specified and directed.

Supply & Fixed ceramic wash hand counter top basin white colour of size 700X460mmX200mm Cat No.ALS-WHT-85601 ALIVE range of Make: Jaquar or equivalent quality make approved by GE complete all as specified and directed.

S&F stainless steel chromium plated single lever basin mixer Cat No. KUP-CHR-35011BPM of Make : Jaquar or equivalent make approved by GE including all necessary fittings comlete all as specified and directed.

Supply & Fixed in repair Towel Ring of (cat part No. ACN-1121N of Jaquar make or equivalent make complete all as specified and directed.

Supply and fixing Wall hung wc with UF soft close seat cover, hinges, accessories set, size 385 X 595 X 385mm of Make : Jaquar (Model : KUS-WHT-35951) including all fittings complete all as specified and directed.

Supply and fixing single piece slim concealed flushing cistern with wall mounting frame , installation kit and "S-type drain pipe connection set for wall hung Wc of Make : Jaquar (Model : JCS-WHT-2400WS) including all fittings complete all as specified and directed.

Supply and fixing flush control plate for concealed flushing cistern of Make : Jaquar (Model : JCP-CHR-372415) including all fittings complete all as specified and directed.

Supply and fixing metropole flush valves dual flow 32mm size ( concealed body) with exposed shut off provision and 100mm square plate (3.0 / 6.0 ltr per flushing ) including control cock and operating lever of Make : Jaquar (Model : FLV- 1089SQ) including all fittings complete all as specified and directed.

Supply & fixed in repair Towel Rack 600mm long with lower hangers (Cat Part No. AHS 1581 of Jaquar make or equivalent complete all as specified and directed.

S&F in repair, chromium plated, Soap dish holder complete all as specified and directed. As per Cat No ACN -1131N of Make : Jaquar or equivalent complete all as specified and directed.

S&F in repair, chromium plated, Tumbler / sanitizer holder complete all as specified and directed. Make : Jaquar or equivalent complete all as specified and directed.

Supply & Fixed 12mm thick frosted glass fitted to walls (or aluminium frame) as partiotion in toilets with necessary arrangements (Make: Saint Gobain or equivalent make & model as approved by GE) complete all as specified and directed.

Supply & Fixed in repairs 15 mm bore concealed Stop valves, (cat part No. CQT 23083 of Jaquar make or equivalent make & model as approved by GE) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M&L for coloured rubber moulded concrete chequered tiles 300x300x25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 32mm bore (outer dia) of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings including taking down of existing GI pipe of 32mm dia etc complete all as specified and directed.

S&F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

S&F Mild steel screw bolts 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 5cm long

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only Chain link MS galvanised fencing, any size or type

S&F galvanised 2 strad, steel barbed wire 2.24mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to measured).

Excavating in post holes (or similar holes) in any type of soil each n exc 0.5 cum. And getting out, returning, filling in and ramming earth or brokrn rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface .

M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping as in straining bar of chain link fencing..

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil.complete all as specified and as directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing m,aterials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc.

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan/Exhaust fan including exhust fan louvers , scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint all as specified and directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for complete all as specified and directed by Engr-in-charge

(a) One light fan/point controlled by one, one way switch 5 Amps

(b) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as abvoe items here in before but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board complete all as specified and directed by Engineer in charge .

S&F switch socket combination multipin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S & F socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S & F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified.

S&F fan regulator step type capacity of polycarbonite complete all as specified and directed by Engineer in charge.

S&F lamp holder PVC Polycarbonate type body, with back plate for batten fitting icluding 9 watt led lamp complete all as specified and as directed by Engineer in charge.

S&F Exhaust fan heavy duty Plastic Body size sweep 300 mm sweep, 230 v, 50 Hz , complete with louvers and making hole with making the good disturbed surfaces complete all as specified and directed by Engineer in-charge.

S & F Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed. Make : Philips Cat part BN 021 LED 22S 6500 PSU GR SI or equivalent in Jaquar, Bajaj, Havells

Supply & fix LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in philips or bajaj.

S&F in repairs Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

S&F in repairs Sub Main Wiring with Two single core PVC insulated cable of size 4 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 2.5 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.0 Sqmm Wire and One No of 2.5 Sqmm Earth wire in One RM length Measured as one unit length.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

S&F in repairs LED light fitting square 57x57 CM Not less than 40 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed

Supply and fixing Single phase wall mounted remote controlled fan heavy duty AC 230 volts 400 mm sweep, metallic body complete including electric connection with twin core copper wire for wall mounted fan, nut, clamp & bolt etc complete all as specified and as directed.Make: Bajaj,Havells or eq

S&F in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 16 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)

S & F in repair MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F in repair MCB Single pole rated capacity 5 to 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Supply & fixing in repair integral post top lanterns complete with Black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 10watt LED lamp , GI pipe as required to fix in gate piller complete all as specified and directed .

Supply & fixing electronic energy meter tamper proof design digital technology of 3 phase 3 x 240 volts 50 HZ 0.4% basic current for direct connected meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete all as specified & directed at site .

Supply, installation, connecting, commissioning and testing of Electrical Chimney with all necessary fixing arrangements as required at site for 6.7' gas stove setup with 2 suction fans with galvenised iron sheet 22 Guage with min 1100 m3/hr suction capacity baffle filter with stainless steel duct pipe of suitable size and adequate length so as to exhaust the gas etc and jali to avoid bird /rodents corrossion resistant setup of suitable size clamps ,angle iron,nuts and bolts complete with all accessories all as required and directed at site.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply & Fixing in repair sheet metal enclosure MCB DB Single door [Acrylic], single pole and neutral, 240 volts,2 way with blanking plate wherever required and IP-43 degree protection complete all as specified & directed

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.

S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.Make- Havells LUMILINEPLUSSBS10WLED865SPCSS or equivalent in PHILIPS ,BAJAJ

S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. Make :Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 4 way with 100 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge .Make- Legrand cat part No.- 5077 80 ,/seimens/GE.

M&L for sand cushioning to underground cable providing with a layer 8 cm before laying and 15 cm after laying, jointing and testing the cable all as specified and directed. Note: Punned thickness of sand shall be measured.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

Supply and fix Flame Proof Flood light fittings, 100 watts LED aluminium body ceiling and pole mounted with IS certification complete all as specified and directed by GE of make Sudhir or equivalent in Prateek exlosion/Shyam.

Supply, laying & testing cable XLPE insulated, screened PVC bedded, galvanised steel wire armoured, electric power cable (heavy duty) with standard Al conductor 1100V grade of size 4 core 25 Sqmm

Ditto all as per above items but size of cable 2 core 6 sqmm

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 4.0 sq mm 4 core, 1100 Volts grade

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 32 X 6 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 5 of MES SSR part-I(1991) (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 40 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S&F G I pipe 40 mm light grade dia for cable protection complete all as specified and directed.

S&F flexible connector for fitting complete all as specified and directed.

S&F flame proof Junction box in aluminum alloy LM6 construction 4 way with 3/4" ET entries with connectors complete all as specified and directed.

Supply, installation, testing and commissioning of LT Feeder Pillar Enclosure, three phase and neutral, factory made fabricated and CPRI approved outdoor type with 3.15mm outer sheet and 2mm inner sheet, 415 volts, outdoor canopy type, dust, weather and vermin proof, front open double door with locking arrangement, fabricated out of 2 mm thick powder coated CRCA sheet, 3mm thick MS angle iron base frame with legs of size 40 X 40 X 60mm and 60cm long grounted with PCC 1:3:6 type C-1 for foundation filling with floor incuding cable entries for incoming and out going cable connection, aluminium bus bar 4 strip rating 100 amps, including colring with RYB & Black including letter writen of pattern and description as directed with supply and fixing the following accessories pre-wired and connected alongwith suitable cable gland,lugs etc. all as specified and directed the items listed here in after:-

i) Incoming:- MCCB 63 amps, 4 pole, 25 KA, 415 volts, 50 Hz. - 01 No

ii) Out going:- MCCB, 25 amps, 4 pole, 16 KA, 415 volts, 50 Hz.- 01No

(iv) Power contactor four pole with coil voltage 230 volt of capacity 25 Amps 50 cycles.Cat Part No 412544 of Legrand - 01 Nos

(v) Time switch microrex analog time switch Cat part No 412814 of Legrand -01 Nos

ANAMIKA CONSTRUCTION

STEPUP CONSTRUCTION

Chetna Enterprises