ADDN/ALTN TO BLDG NO. P-1, TOILET BLOCK T-36, GEYSERS IN MD ACCN NO POR-08, 09, 10 AT STRAND LINE, RAISING OF RAILINGS AT OFFRS ACCN AT COMMD MESS, STORM WATER DRAIN AT SOUTH GATE, 02 NOS SPLIT AC OF 1.5 TR, ALLIED WKS AT ONLINE EXAM CENTRE INSIDE

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Supply and fixing 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply & fixing factory made 35 mm thick 2nd class hard wood skeleton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Part-I, Section 8.24(b) complete all as specified and directed.

Supply & fixing factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

M&L rendering 15mm thick cement plaster on other than fair faces of brick wall in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L 10 mm thick cement plaster on ceiling surfaces finishing even and smooth without using extra cement in cement mortar 1:3 including necessary scaffolding complete all as specified and directed.

Material and labour for 2 coats of oil bound distemper over a coat of primer on internal plastered surfaces after preparation of surfaces complete all as specified and as directed.

M&L preparing newly plastered ceiling surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as directed.

M&L for applying one coat of acrylic distemper to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

S&F 300 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 250 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F aluminium handle, cast type anodised 100 mm size complete all as specified and directed.

S&F aluminium handle, cast type anodised 125 mm size complete all as specified and directed.

S&F aluminium handle, cast type anodised 150 mm size complete all as specified and directed.

S&F 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixing 100 mm mild steel butt hinges (medium weight) cold rolled complete all as specified and directed.

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L mild steel bands and straps support or stays holdfast and similar articles conforming complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic 7 to 8 mm thick coloured tiles, joint free, (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in floor, laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses complete all as specified and directed.

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated Fe-410- W(Gde- E-250) quality-B complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-410- W(Gde- E-250) quality-B complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

S&F in repair Fibre glass reinforced transluent corrugated sheeting with two corrugation side laps fixed with 'L' or 'J' type hooks including dismantling of existing sheet complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken bricks complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregates complete all as specified and directed.

Supply and fixing chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Removal of excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in soft/loose soil and getting complete all as specified and as directed.

Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed.

Removal of excavated material to a distance exc 150 mtr but not exceeding 250 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L PCC M-7.5 (nominal mix) type D2 using 40 mm graded crushed stone aggregates complete all as specified and directed.

M&L for RCC-M25 (design mix) using 20 mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC-M25 (design mix) using 20 mm graded crushed stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC-M25 (design mix) using 20 mm graded crushed stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC-M25 (design mix) using 20 mm graded crushed stone aggregates as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

M&l for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished surfaces complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

M&L for brick work with sub class `B’ bricks (fly ash), straight on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class `B’ bricks (fly ash), straight on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar (1:4) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 5 mm thick rendering in cement mortar (1:3) to brick or concrete celling surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M & L 20 mm thick Rendering in cement mortar on fair faces of brick work or concrete surface of wall in two layer of 10mm thick each in cement morter (1:4) and top layer 10mm thick in cement morter (1:4) using water proofing compound (as per manufacturer's instructions) and finishing the surface even and smooth without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound

M&L 15 mm thick rendering in cement mortar (1:4) to brick or concrete wall surfaces, complete all as directed by the Engineer-in-Charge.

M&L 10 mm thick rendering in cement mortar (1:4) to brick or concrete wall surfaces, complete all as directed by the Engineer-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregates, as in flooring, complete all as specified and directed.

M&L Glazed Ceramic colored tiles of size 300x450x7mm thick in vertical surfaces, set and jointed in neat cement slurry, fixed over and including 10 mm thick screed bed in cement mortar 1:4 as backing layer and pointed in white or colured cement to match complete all as specified and as directed.

M&L Glazed Ceramic colored tiles of size 300x200x7mm thick in vertical surfaces, set and jointed in neat cement slurry, fixed over and including 10 mm thick screed bed in cement mortar 1:4 as backing layer and pointed in white or colured cement to match complete all as specified and as directed.

M&L 50 mm thick PCC, 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement including forming and filling of joints with bituminous filler complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instrutions.

S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement all as directed

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for applying three coats of white wash on new surface of ceilings including preparation of surface complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F tubes 25mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F Chromium plated brass Bib cock, long body with wall flange fixed to 15 mm bore of Iron pipe as in repair complete all as specified and directed. (Make : Essco, Cat No: DLX-512 / PRAYAG, Cat No: 7209 / SOMANY, Model: ETHER / JAINKO, Cat No: LNJ-1)

S&F, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : ESSCO, Cat No: DLX-514B / PRAYAG, Cat No : PIS-18 / SOMANY, Model: ETHER / JAINKO, Cat No: CSV-1)

S&F gun metal gate valve with iron wheel head, ISI marked, screwed both ends for iron pipe for 25 mm bore including taking out old unserviceable one complete all as specified and directed.

S&F Chromium plated brass Angular stop cock concealed type incl concealed body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Essco, Cat No: DLX-526 / PRAYAG, Cat No: PR-144 / SOMANY, Model: ETHER / JAINKO, Cat No: AVJ-1)

Supply and Fix vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY / SOMANY, Model: SIGNATURE)

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141 / SOMANY, Model: SIGNATURE)

S&F Chromium plated brass Pillar tap fixed to wash hand basin, complete all as specified and as directed. (Make : Essco, Cat No: DLX-507 / PRAYAG, Cat No: 7202 / / SOMANY, Model: ETHER / JAINKO, Cat No: PCJ-2)

S&F Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in SOMANY / JAINKO)

S&F Low density polythelene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / SOMANY / JAINKO)

S&F for Vitreous China urinals, bowl type, flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and Union for discharge pipe. complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0501 / HINDWARE, Cat No. 60001 / CERA, Cat No: S4020103 or equivalent model in JAQUAR)

S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe, fixed in cement concrete 1:2:4, size 75 mm complete all as specified and directed.

S&F spun pipes Cast iron soil, waste and vent pipes, ISI marked, 100mm in any length with or without ears, with cement joints, laid in trenches or in floors as specified complete all as specified and directed.

S&F spun pipes Cast iron soil, waste and vent pipes, ISI marked, 75mm in any length with or without ears, with cement joints, fixed on walls with clamps etc complete all as specified and directed.

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 152 or equivalent model in JEXON / POLYTUF / SHAKTI)

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundation fillinag and mass concrete complete all as specified and directed.

Supply, laying, jointing and testing 150mm bore RCC pipes class NP2 laid & jointed complete all as specified and directed.

Supply, laying, jointing and testing 300 mm bore RCC pipes class NP2 laid & jointed complete all as specified and directed.

M&L for concrete bed to drain pipes incl packing under and haunching against the sides of pipe after they and laid tested in cement concrete 1:3:6 type C-2 (bore of pipe 150mm) complete all as specified and as directed.

M&L for concrete bed to drain pipes incl packing under and haunching against the sides of pipe after they and laid tested in cement concrete 1:3:6 type C-2 (bore of pipe 300mm) complete all as specified and as directed.

S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in pillar, post etc complete all as specified and directed.

M&L stainless steel railing, grade 304 with various type of elegant design / pattern with pipes/square pipes/rod/strip for balcony, staircase, cut out area etc, fixed by inserting in holes of required size and grouted in cement mortar 1:3, bolts & nuts to be covered with stainless steel cap of required size complete all as specified and directed. (NOTE: Weight of stainless steel railing or sections shall be verified through a Board of Officers)

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed.

Material and labour for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40 mm graded stone aggregates as in surface channels and drains including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. Complete all as specified and directed. (Note: Inner girth only to be measured)

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

M&L Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.

S&F RCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mm X 600 mm X 100 mm thick, of capacity 3MT, fixed in proper position complete all as directed by Engr in Charge

M&L for precast cement concrete block masonry with solid blocks, 1:2:4 type B1 using 20 mm graded stone aggregates, exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for preparing new surfaces of wood or wood based material of any description and in any position, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.

All as per item No. 3.01 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 3.01 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

S & F Switch piano, flush type, 6 Amps, one way complete all as specified and directed.

S & F socket outlet, flush type, 2-in-1, 3 pin, 5/6 Amps, (non-shuttered) complete all as specified and directed

S&F switch socket combination outlet, flush type with indicator lamp, 6-in-1, 3 pin, 6/16 Amps (non-shuttered), complete all as specified and directed

S&F new Ceiling rose, surface type, three terminals, PVC/polycarbonate complete all ass pecified and directed.

S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (NOTE: List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work)

S&F SPN DB, IP 43 protection, double door, 240 volts, 4 way complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / C&S, Cat No; CSDBSPNPDD04 / BCH, Cat No: BCHSPNDD04W / HPL, Cat No: MDBDD04 / HAGER, Cat No: VYS04D / LEGRAND, Cat No: 5076 10)

S&F MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F in repair MCB, 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F in repair MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and Fix, wall fan, 300 mm sweep, 230 volts single phase and connecting with ceiling rose/connector with an including PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade complete all as specified and directed. (MAKE : CROMPTON GREAVES, Model : Wind Flo / USHA, Model: Maxx air Drew / HAVELLS, Model: Swing Hs or equivalent model in BAJAJ/ORIENT)

Supply, Laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable of size 2 core 10 sqmm, laid in trench or fixed to wall/passing through pipe/pole complete all as specified and directed. (Note :- Necessary earth work, if required, to be measured and paid separately.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC casing-caping of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC casing capping shall be measured as one unit)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, concealed type complete all as specified and directed. (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

S&F single pole enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps, 'C' Curve, 10 KA including all accesories complete all as specified and directed. (MAKE OF ENCLOSURE: LEGRAND, Cat No. 5078 10 / L&T, Cat No. DBMPS120SD / SCHNEIDER, Cat No: A9HMS220 / ABB, Cat No. NSYN8690SGKSP20 / C&S, Cat No: CSDBPSSPN020 / BCH, Cat No: BCHPSDBSPN20 / HPL, Cat No: MDBSP20 / HAGER, Cat No: VYA220Cor equivalent model in Havells / Indo Asian )

Supply, installation, testing and commissioning of heater water storage type electric geyser (vertical cilyndrical type) 25 ltrs capacity with BEE 5 star rating (min) and ABS body, porcelain enamel glass lined inner tank incl fixing arrangement with providing incl suitable capacity flexible cable 3 core with 3 pin plug of 16 amp complete all as specified and directed. (Make: Havells, Model: Monza Turbo / RACOLD, Model - CDR / AO SMITH, Model- HSE-VAS or equivalent model in CROMPTON / BAJAJ)

Supply only chromium plated copper pipe 15 mm dia, length not less than 45 cm including PVC washers for incoming and outgoing hot and cold water incl all necessary fitting materials complete all as specified and directed.

Supply and fixing in repair MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 / NORTH WEST, Cat No: ACPU6M-BT or equivalent model in ABB / CRABTREE / HAGER / ANCHOR (WOODS) / LEGRAND )

Supply, installing and testing split type inverter AC, with indoor & outdoor unit complete, single phase 230V, Copper Condenser with cordless remote control with minimum 5 star rating of capacity 1.5 TR including 4 sqmm 3 core flex cable connection from indoor to outdoor unit as per site requirement including necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified and directed. (MAKE: CARRIER, Model No: DURAFRESH NXI / DAIKIN, Model No: FTKG50TV16U / VOLTAS, Model: 185V MZQ or equivalent model in LLYOD) NOTES :- Pipes, cables & powder coated brackets for connection of outdoor and indoor unit shall be measured and paid seperately)

Supply and laying refrigerant line copper tubing of size 5/8" with clamping on wall surface or concealed with both the ends connection complete all as specified and directed. [Note: Cutting chases and making good of distrubuted surfaces will be measured and paid under seperate item ]

All as per item Ser No 3.23 here - in - before but of size 1/4 "

S&F foam insulation for copper tubing dia 5/8'' and 1/4''.

S&F drain pipe 5/8" dia PVC jacketed heavy duty with fixing of clamp complete all as specified and directed.

S&F powder coated MS bracket stand (1 pair set ) for supporting of outdoor units as directed.

ARJUN DAS VALECHA

MARUTI ENTERPRISES

DEB AND COMPANY

SHEIKH ENTERPRISE

M/S RAJ CONSTRUCTION AND COMPANY

S.K. TRADERS

MS HORIZEN