Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹16,850
Closing Date
2 Jan 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
vinutha
Providing 1 No. of additional 11kV PCVCB for Load bifurcation of Y-operated F14- Basavanahally Feeder at 66/11 kV Sub-station Akkihebbalu in Mandya District on PTK Basis
KPTCL/2024-25/TB/WORK_INDENT1681
KPTCL/2024-25/TB/WORK_INDENT1681
Open
Terminal Bay
Two Tender Document System(Two Cover)
KPTCL SEE Works and Mantainance Circle Mysuru
25 documents required · 24 mandatory · 1 optional
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years taking into account the completed as well as works in progress and Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information
Valid Super Grade Electrical Contractors License of Bidder issued by the Govt. of Karnataka
Power of Attorney in favour of all the persons signing the documents and a certified copy by the Company Secretary/Authorized Signatory for power of attorney holder shall be attached as evidence for authentication
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
Details of Works on hand and Ongoing contractual commitments.
Self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Bidder stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct
Bankers Certificate signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT Liquid Assets and /or availability of credit facilities).for assessing the Liquid Assets (Letter of Credit/ Certificate from banks for meeting fund requirement).
Documentary proof for Clause No. 3.2(b)(i) of ITT such as P.O, LOI/LOA,DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Self-declarations of Bidder in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI & Annexure-XVII as per Clause No.2.4 of ITT
Tenderer/Bidder should have Satisfactorily Constructed, Completed & Commissioned at least One(1) No. of 66kV or above voltage class Sub-Station/66kV terminal bay /similar nature work(Additional Breaker) on Total or Partial Turnkey Basis in thelast10years preceding the date of bid submission and shall be in satisfactory service for a minimum period of One(1) year prior to the date of submission of the bid.ORTenderer/Bidder should have Satisfactorily Constructed, Completed & Commissioned not less than Five(5) Nos. of 33kV or above voltage class Sub-Stations/33kV terminal bay /11kV breaker replacement similar nature work on Total or Partial Turnkey Basis in the last10 years preceding the date of bid submission and shall be in satisfactory service for a minimum period of One(1) year prior to the date of submission of the bid
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder
The bidder should have valid GST registration with GSTIN number, PAN Card
Achieved in atleast two financial years in the last five years i.e. FY 2019-2020 to 2023-2024 a minimum financial turnover of Rs 11.92 Lakhs.
Liquid Assets and/or availability of credit facilities of not less than Rs. 1.68 Lakhs (Credit lines/ Letter of credit/ certificates from Banks for meeting the fund requirement etc.)
₹500
₹16,850
19 Dec 2024
19 Dec 2024
4 Jan 2025
1 Jan 2025
Material Portion for Providing 1 No. of additional 11kV PCVCB for Load bifurcation of Y-operated F14- Basavanahally Feeder at 66/11 kV Sub-station Akkihebbalu in Mandya District on PTK Basis
11kV 400A, Double break GOS. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
11kV 400A, Single break GOS. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
LA’S 10 KV 05KA class for DP Structures, Station type(Metal Oxide type). ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
11kV Epoxy Busbar insulators with nut & bolts suitable(10mm) for LA GI Flat supporting. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
11kV class PVC insulated Copper control cables with Lugs/ferrules /Glands as per the technical specifications
a)19 core 2.5 Sq mm (for Annunciation) ---- Amount put to tender is arrived excluding GST...
b) 4 core 6 Sq mm (for CT connection) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
c) 4 core 4 Sq mm (for PT supply) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
d) 2 core 2.5 Sq mm ( for AC supply) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
e) 2 core 6 Sq mm ( for DC supply) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Drake ACSR ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Coyote ACSR Conductor ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Beams out of channel 100X50 with arragements for stringing power conductors on 11 kV side a) 1B2 4.00 mtrs long, long with clamps,bolts and nuts.0.036 MT each ,(8 No's for beams, ) ---- Amount put to ...
Bolted Type Tension clamp for single coyote ACSR conductor 70/90KN 16mm ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Bolted Type Tension clamp for single Drake ACSR conductor 70/90kN, 16mm ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Bolted Type Suspension clamp for single Drake ACSR conductor 70/90KN 16mm ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Disc insulator 90kN ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
C Type Wedge connector (Drake- Drake) ACSR Conductor. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
C Type Wedge connector ( Drake-Coyote) ACSR conductor. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
C Type Wedge connector (Coyote- Coyote) ACSR conductor. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
CT terminal connector ( Drake- Coyote) ACSR conductor ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Coyote Pad clamps. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Earth bond 450mm long ( for GOS & CT) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
RCC poles 9.5 mtr long 300 kg working load for ODS ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
9.0mtr RCC Pole for DP structure 150 KG WL ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL - GI ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
H frame set for GOS mounting ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
B.Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded all-round the pipe using cast iron welding...
Earthing name plates for new earting pits ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Galvanised Bolts & Nuts of Various Sizes ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
(8 TB's per Feeder) = (8x1 nos = 8) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
(Each color 15mtrs-R-Y-B)
(15mts x 3 x 1 feeder = 45mtr) ---- Amount put to tender is arrived excluding GST hence bidder should qu...
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
(Each color 5mtrs-R-Y-B-N)
(5mts x 4 x 1 feeder = 20mtr) ---- Amount put to tender is arrived excluding GST hence bidder should quo...
Control Cable - 10 Copper core x 1.5sqmm
(From remote contol desk to RTU)
(15mtrs x 1 feeder = 15mtrs) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excludin...
Signal Cable - 10 Copper core x 0.5sqmm
Feeder to Feeder loop = 5mts x 1feeder =5mtrs)
Remote control desk to RTU (for DI):
25mtrs x 1 feeder. = 25mtrs ---- Amount put to tender is arrived excluding ...
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x1=20mtr) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
(80 lugs/panel x 1 = 80) ---- Amount put to tender is arrived excluding GST hence bidder should quo...
C-type channel of size 50x100x50x6mm
(50cm/panel) = (0.5m x 1 nos = 0.5 Mtrs) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
(Size: 32mm dia) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amo...
CT TBs - 6 nos for each panel
(1 x 6 = 6 nos) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Labour Portion for Providing 1 No. of additional 11kV PCVCB for Load bifurcation of Y-operated F14- Basavanahally Feeder at 66/11 kV Sub-station Akkihebbalu in Mandya District on PTK Basis
11 KV Switchgear for Feeder panel: 11 KV PCVCB, 350MVA, 20 kA, 800A Feeder, with SCADA compatible features and 11KV outdoor Current transformer of Ratio 200-100/1-1A, (for feeders of 25kA SWG) outdo...
11kV 400A, Double break GOS. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
11kV 400A, Single break GOS. ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
LA’S 10 KV 05KA class for DP Structures, Station type(Metal Oxide type). ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
a)19 core 2.5 Sq mm (for Annunciation) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
b) 4 core 6 Sq mm (for CT connection) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
c) 4 core 4 Sq mm (for PT supply) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
d) 2 core 2.5 Sq mm ( for AC supply) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
e) 2 core 6 Sq mm ( for DC supply) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Beams out of channel 100X50 with arragements for stringing power conductors on 11 kV side a) 1B2 4.00 mtrs long, long with clamps,bolts and nuts.0.036 MT each ,(8 No's for beams, ) (Pg. 198 D2) ---- A...
Formation of main bus with single Drake 11kv ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Formation of cross bus with single Coyote 11kV ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
RCC poles 9.5 mtr long 300 kg working load for ODS ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
9.0mtr RCC Pole for DP structure 150 KG WL ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
H frame set for GOS mounting ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
B.Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded all-round the pipe using cast iron welding...
C. Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc. ---- Amount put to tender is arrived excluding ...
D. Grounding of equipment with 50x6mm G.I. Flat and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and c...
Earthing name plates for new earting pits ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Loading at Store and unloading at Sight of 11KV switchgear and other materials etc ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring- Both 3ph 4wire, supply- self powered, Measuring range voltage: 120 percent, current: 120 percent...
Opto Coupler -Input Vtg -110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be ...
Control Cable - 10 Copper core x 1.5sqmm
(From remote contol desk to RTU)
(15mtrs x 1 feeder = 15mtrs) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excludin...
Signal Cable - 10 Copper core x 0.5sqmm
Feeder to Feeder loop = 5mts x 1feeder =5mtrs) Remote control desk to RTU (for DI)
25mtrs x 1 feeder = 25mtrs ---- Amount put to tender is arrived excluding GST...
1.5 Sqmm Grey wire for interfacing of DI and DO(20 mtrs for each panel)(20x1=20mtr) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
CT TB's - 6 nos for each panel
(1 x 6 = 6 nos) ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Configuration of RTU and Engineering along with validation of data at SLDC ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Testing and Commissioining portion for Providing 1 No. of additional 11kV PCVCB for Load bifurcation of Y-operated F14- Basavanahally Feeder at 66/11 kV Sub-station Akkihebbalu in Mandya District on PTK Basis
Testing & Commissioning: Wiring: Identification of wires, Ferruling Crimping & Termination of wires for annunciation, etc.Testing of Relays, CTs, PTs, & Breaker for operation. ---- Amount put to tende...
11kV Outdoor Switchgear wiring & assisting ---- Amount put to tender is arrived excluding GST hence bidder should quote the amount excluding GST
Civil Portion for Providing 1 No. of additional 11kV PCVCB for Load bifurcation of Y-operated F14- Basavanahally Feeder at 66/11 kV Sub-station Akkihebbalu in Mandya District on PTK Basis
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Removing the existing jelly and respreading after the completion of work (Entire earth mat area) as per direction of Engineer in charge. ---- Amount put to tender is arrived excluding GST hence bidder...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
APT - Akkihebbal.....xlsx
Others - AMOUNT PUT TO TENDER • 0.04 MB
technocom_sheet.xls
Techno-Commercial Worksheet • 0.03 MB
1. NIT- Akkihebbal doc.docx
Instructions to Tenderers • 0.03 MB
2. Tender documents-Akkihebbal.docx
Tender Document • 0.33 MB
3.Annexure.doc
Others - Annexure • 0.19 MB
6. CIVIL Tech specs NH.doc
Design Document • 0.18 MB
5. Work on Hand details (Tender).doc
Others - Works on Hand • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .