DOING MAINTANACE WORK OF TRANSFORMERS AT RAMPUR AND KOLGOV AND SUPPLYING REQUIRED MATERIALS FOR MAINTENACE.

Amount

MOTAR PANNEAL REPARING WORK

75HP Motor Main Contactor MNX 110AmpThree phase 415v 2NO+2NC Star /Delta Starter

100HP Motor Main Contactor MNX 140AmpThree phase 415v 2NO+2NC Star /Delta Starter

SM 301 Single Phasing Preventor ON/OFF Delay 1C/0 415V AC

Air circuit breaker manually operated non-drawout type of 630A, 500V, 3 pole having S.C. rating 50 kA (Ics=Icu=Icw for 1s)

3 Pole MCCB of 315/400A, 415Vcapacity with S.C. rating 36 kA (Ics=100% of Icu),thermaland magnetic setting with provided leads on iron/G.I. frame

3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame

Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made fromCRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB

Incoming and Outgoing Cable Alleyssuitable for MCCB panel board of 400A incoming and 12 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB.

Air circuit breaker manually operated non-drawout type of 630A, 500V, 3 pole having S.C. rating 50 (Ics=Icu=Icw for 1s),with standard accessories on provided iron frame

Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 8 wayoutgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB.

Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB

Incoming and Outgoing Cable Alleys suitable for MCCB panel board of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and basic DB

Supplying and erecting 11 kV HRC Fuse 63A for load break switch to be fitted with necessary nut bolts and commissioning complete

3 x 300 sq mm 11 kV, XLPE(E) armoured cable wall/ceiling or laid in provided trench / pipe in an approved manner

3 x 150 sq mm 11 kV, XLPE(E) armoured cableon wall/ceiling or laid in providedtrench / pipe in an approved manner

3 x 120 sq mm 33 kV, XLPE(E) armoured cableon wall/ceiling or laid in provided trench / pipe in an approved manner

3 x 70 sq mm 11 kV, XLPE(E) armoured cableon wall/ceiling or laid in provided trench / pipe in an approved manner

3 x 120 sq mm 11 kV, XLPE(E) armoured cableon wall/ceiling or laid in provided trench / pipe in an approved manner

Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x400 sq. mm Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x400 sq. mm

crimping typealuminium lugs for cable 400 sq mm complete

crimping type aluminium lugs for cable 150 sq mm complete

Supplying & erecting on load Four pole Iron clad/metal clad ON LOAD change over switch 400A, 415/500V erected on angle iron / G.I. frame approved make

ON LOAD Four Pole Automatic Transfer Switch suitable for 415V, 50 Hz,100Acapacity conforming to IEC: 60947-1 & IEC: 947-6- 1/ IS: 13947-1, with automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron /G.I. frame and connected with provided leads.

Four pole Iron clad/metal clad ON LOAD change over switch 200A, 415/500V erected on angle iron / G.I. frame approved make.

525 V Three phase, 50 cycles, MPP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAR bank of all polypropylene condensers (APP) with the standard capacities of 2,3,5,7,10,12.5 and 15 kVAR units of P.F. correction for operation on 3 phase 50 cycles with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Triple pole metal clad HRC fuse switch 415 / 500V 125A with neutral link with ISI marked HRC fuses,

Supplying & erecting mains with 3x10 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places

rolled steel joist (girder) pole 100 x 116 mm (23 kg/m

MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 550 mm long

MS pole bracket for guarding/LT OH Line fabricated from ISM channel 75x40x6mm and 550 mm long for

MS pole bracket, for OH conductor fabricated from ISM channel, 75x40x6mm 550mm

100 x 50x6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length

vee cross arm with ISM channel of 100 x 50 x 6mm or 22/ 33kV HTOH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1530 mm bent at angle of 60 degree keeping base 310 mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete

ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394 kg/km)

all aluminium stranded conductors 7/3.10 mm. complete. (Ant.) (145.0 kg/km)

distribution class, 11 kV thyrite type lightning arrester with nut bolts, on provided MS channel

‘D’ type pole clamps, fabricated from 50 x 6 mm MS flat with 15 mm dia. bolts and nut fixed to steel tubular pole duly painted with one coat of red oxide and two coats paint.

Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Dismantling the existing overhead line including G.I. wires of allsizes without damaging & making the coils in suitable sizes.

aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required.

conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm diacopper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected onprovided foundation in an approved manner

Supplying, installing, testing & commissioning 3 phase11/0.433 kV, 50 Hz., 160 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standardaccessories complete with test certificate with losses below 670Watts at 50% load, 1950 Watts at 100% load as per IS:1180 – 2014 energy efficiency level II with necessary permissions of Electrical Inspector

Dismantling the existing distribution transformer of any capacity from the plinth / foundation safely without any damages. kVA

LED street light fitting suitable for 60W including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat extruded aluminium complete

LED Flood light fitting of 70- 80W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die aluminum alloy and heat sink extruded aluminum complete

LED Flood light fitting of 30-40W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any places

PVC trunking (PVC casing-ncapping) of size 32 mm with accessories on wall/ceiling

PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling

shockproof 6A ISI mark porcelain base T.Switch / bell push erected on filled polypropylene board or polished double wooden block / 3 mm thick hylam sheet / 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected.

shockproof T. switch 16 Aporcelain base surface mounting type / flush mounting type erected on filled polypropylene board or polished thick

shockproof piano type switch 250 V 16 A, erected on filled polypropylene board or polished double wooden/ folded or screwed board with top of either wooden/ 3mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected.

Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block /

Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected.

Supplying and erecting ISI mark modular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (one module) electronic dimmer 400 / 450W, duly erected on provided plate and box with wiring connections complete

Supplying and erecting ISI mark modular type (one module) electronic dimmer 400 / 450W, duly erected on provided plate and box with wiring connections complete

PVC Surface modular switch box with mounting plate for 12 modules duly erected.

PVC Surface modular switch box with mounting plate for 16 / 18 module duly erected.

SPMCB 0.5A to 5A in provideddistribution board

SPMCB 6A to 32A, B- series (for lighting) in provided distribution board MCB

TPMCB 6 A to 32A in provided distribution board

TPMCB 40A to 63A in provideddistribution

double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete.

triple pole isolators only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete

four pole isolators only switch version of miniature circuit breakers of 40A in provided distributionboard complete.

four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board complete.

single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ GI frame

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 2 ways for outgoing SP MCB’s on iron/ GI frame

bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A

Heat shrinkable straight through joint kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material

11Kv HT LINE TRANSFORMER STRUCTURE MAINTENANCE WORK.

11 kV out door type gang operated air break, triple pole switch 400A,(A. B. Switch) capacitywith 3 post pin type insulator per phase, mounted in horizontal or vertical position

Distribution class, 11 kV lightening arrester

11Kv Horn Gap Fuse Set

11 kV out door type drop out fuse with insulator complete with fuse holders,(D.O.)

11Kv porcelain pin type insulator with G.I. Pin suitable for11kV line

11Kv porcelain post type insulator suitable for 11kVline,

11Kv porcelain Disc type insulator suitable for 11kVline,

Distribution class, 11 kV lightening arrester

Providing earthing stud with necessary materials

Griper strain Hardware for 55 sqmm AAAC

11Kv Transformer Structure Painting Red Oxide paint for2 coates Aluminum paint for 1 Coates

AAAC 55mm2 Conductor

Copper Wire 8NO For Jumper

Sundries (Grees,Sine paper, Oil Nut Bolt Washer etc…

Labour Charges

Lugs All Type

pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials

G.I. Barbed Wire 8 S W G./ 6 S W G

160KVA TRANSFORMER REWINDING AND REPAIRING WORK.

High Voltage side Rewinding S. E. Copper Wire

Lo Voltage side Rewinding S. E. Copper Wire

Transformer insulating Material

Transformer Coupling ohan drawing

Transformer Breather Replacement

New Transformer Oil

Transformer Transporting Charges

Labour Charges

160 KVA Transformer Rejected Winding Wire and Parts And Other Material

160KVA TRANSFORMER OIL TOPUPING AND REPAIRING WORK.

Primary side High Voltage Bushing + High Voltage Road

Secondary side High Voltage Bushing + High Voltage Road

Transformer Complete Gasket Sheet

Transformer Oil Glass

Transformer LT cable lugs

Transformer Breather Replacement

New Transformer Insulted oil

Lab our charges

100,HP 75HP, 20HP Motor Pump Repairing

copper / GI plate earthing to motor , pump , transformer and other electrical devioces

Reparing of Transformer plinth as per requirement

ABC Fire Extingusher 2 KG

ABC Fire Extingusher 5 KG

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material.

Supplying , erecting & terminating 3 x 240 sq. mm. aluminium 11kV(UE), XLPE armoured cable on wall/ceiling or laid in provided trench.

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole.

Supplying & erecting Siemens type brass cable glands for 3½ core 240 sq. mm. for XLPE armoured cable.

Supplying & erecting Siemens type brass cable glands for 3½core 300 sq. mm. for XLPE armoured cable

Supplying & erecting crimping type aluminium lugs for cable up to16, 25,35.50,70,95,120,150,240,300sq. mm. complete.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150, mmwidth & 100 mm height comprising all required standard accessories

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150,200,300,400,500, mm width & 75 OR 100 mm height complete with necessary couplerplates & hardware in approved manner.

Supplying and erecting rolled steel joist (girder) pole 125 x 70mm (13.3 kg/m) Stud pole.

Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70mm A/F on provided foundation.

Supplying, erecting & terminating XLPE armoured cable 4 core 10sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete.

Making M- 20 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (forTransformer).

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete.

Supplying & erecting mains with 1x25sq.mm F.R copper PVC insulated wire laid in provided inside pole/Bus bars or any other places.

Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

Supplying and erecting LED Flood light fitting of 70- 80W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink aluminium complete -

Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m long “B” grade G.I. pipe along with pole cap of 125mm dia 600 mm long duly welded

Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m long “B” grade G.I. pipe along with pole cap of 125mm dia 600 mm long duly welded

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of redoxide and two coats of enamel paint to match the switchgears or asper directions by the authority.

Supplying, erecting & terminating XLPE armoured cable 1 core 70sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 2 core …..sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench pipe

Supplying, erecting & terminating XLPE armoured cable core3…. sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable3½ core sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected.

Supplying, erecting & terminating XLPE armoured cable 4 core….. sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner

Providing earthing with galvanized iron earth plate size 60 x 60 x0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials,

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials

Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.

Providing printed instruction chart for persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS 47705 suitable for working upto 22 kV supply complete.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying and erecting wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S. Rod grouted in wall to a depth of minimum 15cms complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacture

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity

. Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

M/s Amol Electrical Enterprises

M S R MURTHY