8- Kabir Nagar Yojana me sadak pr interlocking tile evam nali va park ki boundarywall tatha pathway ka nirman karya.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Dsr 2023/15.3(rate-3551.25)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR2023/15.7.4(RATE-2060.20)

Deduction of Bricks

Deduction of Bricks Bats

earth work in cutting or filling in ordinary soil loam clay or sand including 1.5 mtr lift &lead upto 8 km including part of earth cartage royality all complete as per direction pg enginner incharge. DSR 2023/2.6+CARTAGE +LAND COST

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil +25% ADD FOR FOUL SOIL .DSR 2.6.1 /2023(rate-177.50)

Providing/Laying PCC in 8: 4: 1 (8 graded brick ballast 40 mm nominal size: 4 fine sand: 1 cement) in foundation and under floor including supplly of all materials, labour and T&P etc required for proper completion of the work

Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compacted of work. as direted by Engineering in incharge. stone ballast granullar 53mm to 26.50mm @27.56%,26.5 to 9.5 mm @22.5%,9.5 to 4.75 mm @10%,4.75 mm below @mm below @40% all complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.. DSR 2023 16.91.2 (RATE-1091.50)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22A.6