Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹25.0 L
EMD Value
₹49,980
Closing Date
14 Oct 2026, 6:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE OFFICER
MUNICIPAL BOARD KHUDALA FALNA
ARC of construction of tube well and installation of submersible pump at various places in municipal area
2026_DLB_601886_1
3324
Open Tender
Civil Works
Percentage
90 days
MUNICIPAL BOARD KHUDALA FALNA
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
EXECUTIVE OFFICER /MDRISL
₹49,980
Yes
30 Sept 2026
30 Sept 2026
16 Oct 2026
30 Sept 2026
14 Oct 2026
30 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 20.1.3 150 mm dia Nominal bore. | 1 | MTR | 844 | ₹844 |
| 2 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work. 20.4.3 150 mm dia. | 1 | MTR | 1,517 | ₹1,517 |
| 3 | Supply and fixing of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size: 20.7.3 150 mm dia | 1 | Nos | 285 | ₹285 |
| 4 | Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | 1 | Nos | 312 | ₹312 |
| 5 | Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. | 1 | EACH | 5,468 | ₹5,468 |
| 6 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 70.4.1 for vertical installation 70.4.1.1 40 mm OD 6 kg / cm2 | 1 | MTR | 96 | ₹96 |
| 7 | Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 70.6.1 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively. 70.6.1.4 3.0 HP, 1-Ø, (40 -170)Mtr, (60- 20) LPM Copper Wound. | 1 | Nos | 45,531 | ₹45,531 |
| 8 | Providing & Laying of synthetic rope for submersible pump ISI
marked (IS:5175) of following sizes. complete in all respect. All as
per pre approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A" attached with
this BSR .12mm (suitable up to 50 mm OD pipe) | 1 | MTR | 44 | ₹44 |
| 9 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 53.7.3 4.0 Sq.mm 3 core flat / Round | 1 | MTR | 219 | ₹219 |
| 10 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6.0 Sq. mm 60.2.2.1 2 core. | 1 | MTR | 131 | ₹131 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.32 MB
BOQ_1066821.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .