CA NO CESZ/TENGA/01 OF 2020-2021 COMPLETION OF INCOMPLETE WORK OF PROVN OF OTM ACCN (PHASE II) AT DAHUNG (TENGA)

Amount

NOTE (Applicable for all parts/items/) :- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

BUILDING AND STRUCTURE WORKS (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for "BUILDING AND STRUCTURE WORKS ” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 12,64,09,200.00 inserted by the MES in Schedule ‘A’ Part-I.

SITE CLEARANCE, SITE DEVELOPMENT, EXCAVATION & EARTHWORK (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “SITE CLEARANCE, SITE DEVELOPMENT, EXCAVATION & EARTHWORK” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 33,75,073.07 inserted by the MES in Schedule ‘A’ Part-II.

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,75,640.20 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 15,31,618.40 inserted by the MES in Schedule ‘A’ Part-IV.

ROAD, PATH AND CULVERT (Sch 'A' Part-V)

Lump sum price worked out by the Contractor for “(ROAD, PATH AND CULVERT)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 12,29,605.41 inserted by the MES in Schedule ‘A’ Part-V.

SEWAGE DISPOSAL (Sch 'A' PART-VI)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,48,437.60 inserted by the MES in Schedule ‘A’ Part-VI.

AREA DRAINAGE (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,76,102.89 inserted by the MES in Schedule ‘A’ Part-VII.

SECURITY WALL, FENCING & GATE (Sch 'A' Part-VIII)

Lump sum price worked out by the Contractor for “(SECURITY WALL, FENCING & GATE)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 7,09,574.65 inserted by the MES in Schedule ‘A’ Part-VIII.

RETAINING WALL / RIVER PROTECTIVE WALL (Sch 'A' PART-IX)

Lump sum price worked out by the Contractor for “(RETAINING WALL / RIVER PROTECTIVE WALL)” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 24,53,327.43 inserted by the MES in Schedule ‘A’ Part-IX.

EXTERNAL WATER SUPPLY (Sch 'A' PART-X)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY )” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 13,22,192.70 inserted by the MES in Schedule ‘A’ Part-X.

EXTERNAL ELECTRIFICATION (Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION )” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 18,29,677.28 inserted by the MES in Schedule ‘A’ Part-XI.

HOT WATER SUPPLY (Sch 'A' Part-XII)

Lump sum price worked out by the Contractor for “(HOT WATER SUPPLY)” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 9,16,592.00 inserted by the MES in Schedule ‘A’ Part-XII.

REFRIGERATION, WASHING MACHINE, LIGHTNING PROTECTION & CONDUIT FOR TEL / TV (Sch 'A' Part-XIII)

Lump sum price worked out by the Contractor for “(REFRIGERATION, WASHING MACHINE, LIGHTNING PROTECTION & CONDUIT FOR TEL / TV)” as listed in Schedule ‘A’ Part-XIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,08,576.10 inserted by the MES in Schedule ‘A’ Part-XIII.

DEMOLITION & DISMANTLING (Sch 'A' Part-XIV)

Lump sum price worked out by the Contractor for “(DEMOLITION & DISMANTLING)” as listed in Schedule ‘A’ Part-XIV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 45,992.36 inserted by the MES in Schedule ‘A’ Part-XIV.

MISCELLANEOUS ITEM REQUIRED FOR B/R & E/M SERVICES (Sch 'A' PART-XV)

Supply, laying and testing for ductile iron pipe for drinking water supply with spigot and socket ends suitable for push on rubber joint centrifugally cast class "K-7" inner side cement lining and outer side black bitumen coating and any length laid in trenches / supported on pillers / fixed to wall etc of size 150mm bore pipe including push on rubber (EPDM) ring with ISI marked complete all as specified and directed.

Supply, laying and testing for ductile iron pipe for drinking water supply with spigot and socket ends suitable for push on rubber joint centrifugally cast class "K-7" inner side cement lining and outer side black bitumen coating and any length laid in trenches / supported on pillers / fixed to wall etc of size 100mm bore pipe including push on rubber (EPDM) ring with ISI marked complete all as specified and directed.

Material and labour for cutting of existing CI/DI tubing of size 150mm bore for taking out branch connection of 150mm dia and insertion of one number Tee size 150mm X 150mm X 150mm and connect DI pipe 150mm dia including jointing materials, necessary excavation in any type of soil & earth work complete all as required and as directed.

Supply and fixing for ductile iron fittings conforming to IS: 9523/2000 with finishing as per class 13/IS 9523/2000 such as bends (any type radius and angle) Tapers any type (straight bend double socket etc) Tee pieces single branch ‘Y’ junction double branch cross (all sockets or socket and spigot) collars caps and plugs etc suitable for upto 150 mm bore complete all as specified and directed.

Supply and fixing for air release valve of 100mm bore with two air outlets cast iron body with flanged ends including provision of nut-botls, washers and gaskets etc complete all as specified and directed.

Material and labour for construction of solid block masonary valve pit / chamber of size 900mm X 900mm X 900mm (internal dimention) complete with excavation in hard/dence soil, 200mm thick solid block masonary in cement mortar (1:4) over 100mm thick PCC 1:4:8 type D2 (using 40mm thick stone aggregate) as in foundation, 50mm thick PCC 1:2:4 type B1 coping on the top of wall, rendering 15mm thick with cement mortar 1:4 on inside and exposed external surface upto 15cm below GL including 3mm thick MS sheet cover alongwith angle iron frame of size 40x40x6mm with locking arrangement and necessary fixing matrials like hinges, nut/bolts, MS handle of suitable length and size etc (valve chamber cover shall be opened in two leafs) and painting to MS cover with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Material and labour for construction of solid block masonary valve pit / chamber of size 600mm X 600mm X 600mm (internal dimention) complete with excavation in hard/dence soil, 200mm thick solid block masonary in cement mortar (1:4) over 100mm thick PCC 1:4:8 type D2 (using 40mm thick stone aggregate) as in foundation, 50mm thick PCC 1:2:4 type B1 coping on the top of wall, rendering 15mm thick with cement mortar 1:4 on inside and exposed external surface upto 15cm below GL including 3.15mm thick MS sheet cover alongwith angle iron frame of size 40x40x6mm with locking arrangement and necessary fixing matrials like hinges, nut/bolts, MS handle of suitable length and size etc (valve chamber cover shall be opened in two leafs) and painting to MS cover with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Supply, install, commissioning and testing of outdoor modular type factory made by original equipment manufacture, Auto / manual power factor Corrector LT panel made out of CRCA 2mm thick duly pretreated & powdered coated finish with iron angle base frame support floor mounted, suitable for 3 phase 415 volt, 50 Hz system comprising of and including the following for achieving 0.99 power factor: - (a) MCCB TP of suitable amps capacity, minimum breaking capacity 25 KA – 01 No (b) Busbar TPN copper of suitable capacity – 01 Set (c) Metallised polypropylene capacitor (MPP) , Heavy duty type with (12.5 x 2+5x1+10x2) Capacity 50 KVAR Banks Total 50 KVAR. Make : L&T or Neptune-Ducati NSL-10 heavy duty Capacitors or equivalent as mentioned in list of makes. (Each capacitor shall have inrush current limiting coils.) (d) Suitable back up protection for each capacitor bank of 12.5 KVAR with HRC Fuse links with base. (e) Air break contactor of capacitor duty as per IS 13947 for Each capacitor bank. (f) Automatic / Manual Power Factor Control Relay unit for sensing Power Factor & monitoring on / off operation of contactors as per requirement of power factor improvement. & measuring instruments etc complete. (g) Internal power & control wiring with suitable size of PVC insulated copper conductor cable. (h) One Suitable capacity CT shall be installed at Existing LT panel & suitable control wiring from this CT to auto power factor corrector panel. (j) Any additional Accessories as provided by OEM for proper functioning of auto power factor corrector Panel. Make : L&T type IntellVAr-S , Neptune – Ducati or equivalent as mentioned in list of makes.

Material & labour for RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module all as directed. Make : Legrand, CAT No.573626 or equivalent model of make list as given in Appendix 'B'.

Material and labour for TV socket 1 module alongwith flush metal box 1 module and front cover plate 1 module all as directed. Make : Legrand, CAT No 573625 or equivalent model of make list as given in Appendix 'B'.

Supply and install BTC world class loundry equipment including Washing machine FLE30-30 kg capacity outer drum & inner basket stainless steel, front loading, elect heated, auto-reverse, aut-timed, auto-temp control fitted with control panel & 3 HP 3 Phase Motor etc complete all as directed.

Material and labour for polyester needle punched non woven geotextile as filter media behind Gabion wall, below gabion mattress, as per MORTH 700 Type-III geotextile. The width of geotextile roll shall not be less than 4.5m, at easily accessible location including top and bottom, with all leads and lifts, manpower and machinery, materials, labours etc. complete all as directed by Engr-in-Charge.

Supply, installation, testing and commissioning Refrigerator electric driven single phase of capacity 268 litres (not less than 258 liters), BEE 3 star rated complete all as directed . Make : NR-BC27SHX1(EOL) of Panasonic or equivalent model of make list as given in Appendix 'B'.

Supply, installation, testing and commissioning Refrigerator electric driven single phase of capacity 307 litres (not less than 300 liters), BEE 3 star rated complete all as directed . Make : NR-BG311VDA3 of Panasonic or equivalent model of make list as given in Appendix 'B'.

Supply, installation, testing and commissioning Refrigerator electric driven single phase of capacity 190 litres, BEE 5 star rated complete all as directed . Make : NR-A 202STMG5 of Panasonic or equivalent model of make list as given in Appendix 'B'.

Supply, installation, testing and commissioning Deep freezer electric driven single phase of capacity 200 litres BEE 3 star rated complete all as directed .

Supply and install Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA complete all as specified and directed. Make : V Guard (Model VG 1000 AC) or equivalent model of make list as given in Appendix 'B'.

Dismantling of Bib / Piller tap of any description complete all as directed.

Dismantling of AC/PVC soil pipe of any dia complete all as directed.

Dismantling of sanitary items like WC/WHB/Urinal complete all as directed.

Material and labour for shower rose fancy type chromium plated suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 195 mm long with bend of 45 degree complete all as specified and directed.

Supply & fixing for white blank plate, 1 module complete all as directed.

Supply & fixing for exhaust fan 300mm sweep, 1320 RPM, AC single phase 230 V double ball bearing with bird guard, complete with nuts, screws, bolts of specified sizes including electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75sqmm copper conductor from celing rose to exhaust fan complete all as specified and as directed. Make- Usha, model-Turbo Jet DBB-LD or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for exhaust fan 380mm sweep, 1400 RPM, AC single phase 230 V double ball bearing, complete with nuts, screws, bolts of specified sizes including electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75sqmm copper conductor from celing rose to exhaust fan complete all as specified and as directed. Make : Usha, model-Turbo HD 1400 (rpm) or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving surface mounting LED 2X2 square LED lighting fixture white powder coated CRCA housing with high power LEDs, aluminium front frame with flat white high transmission acrylic cover suitable for and including 43 watt LED lamp including electronic ballast, etc all electrical accessories pre-wired upto terminal block including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- BCTBLS 43 ZT WH or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving pendent type LED lighting suitable for and including 1 x40 watt LED lamp including electronic ballast, lamp holder etc all electrical accessories pre-wired upto terminal block including provisionof suspension 2 Nos and electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- BPTX 40W LED4F NW or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving ultra slim LED lighting fixture with extruded aluminium body surface mounting luminaire suitable for and including 1 x40 watt LED lamp including electronic ballast, lamp holder etc all electrical accessories pre-wired upto terminal block including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- BLTRU 40W NW VIVA or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving ultra slim LED lighting fixture with extruded aluminium body surface mounting luminaire suitable for and including 1 x 20 watt LED lamp including electronic ballast, lamp holder etc all electrical accessories pre-wired upto terminal block including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- BLTRU 20W NW VIVA or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving pendent type LED lighting suitable for and including 1 x 20 watt LED lamp including electronic ballast, lamp holder etc all electrical accessories pre-wired upto terminal block including provision of suspension 2 Nos and electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- BPTX 20W LED4F NW or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving sleek extruded polycarbonate LED lighting fixture with white acrylic cover surface mounting luminaire suitable for and including 1 x 10 watt LED lamp including electronic ballast, lamp holder etc all electrical accessories pre-wired upto terminal block including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- BCLSB 10 WH or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving wall mounting lighting fixture made up to polycarbonate with B-22 base lamp holder incluing LED lamp 10 watts etc all electrical accessories pre-wired upto terminal block including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Havells, type - CITY 3 15W or equivalent model of make list as given in Appendix 'B'.

Supply & fixing for energy saving LED bulk head luminaire suitable for and including 1 x 10 watt LED lamp including electronic ballast, lamp holder etc all electrical accessories pre-wired upto terminal block including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose complete all as directed. Make : Bajaj, Type- WEE PLUS or equivalent model of make list as given in Appendix 'B'.

Supply & fix for eposy powder coated MCB distribution box IP-43 double door TPN 4 way vertical type for MCBs alongwith provn for MCCB as incomer with common bus bar at incoming end of outgoing MCBs grouted / flush to wall complete all as directed. Make : Legrand, CAT No - 6079 13 or equivalent model of make list as given in Appendix 'B'.

Supply and fixing MCCB 4 pole, 63 Amps, thermal magnetic, with repturing capacity 25 kA complete all as specified and as directed. Make : Legrand, CAT No - 420013 or equivalent model of make list as given in Appendix 'B'.

Supply and fixing MCB, rupturing capacity 10 kA 'C' curve, SP 6 to 32 Amps, ISI marked complete all as specified and as directed.

Supply and fixing MCB, rupturing capacity 10 kA 'C' curve, SPN 6 to 32 Amps, ISI marked complete all as specified and as directed.

Supply and fixing MCB, rupturing capacity 10 kA 'C' curve, TP 6 to 32 Amps, ISI marked complete all as specified and as directed.

Supply and fixing MCB, rupturing capacity 10 kA 'C' curve, TPN 6 to 32 Amps, ISI marked complete all as specified and as directed.

Supply and fixing MCB, rupturing capacity 10 kA 'C' curve, TPN 35 to 63 Amps, ISI marked complete all as specified and as directed.

Material and labour for cable route indicator made of RCC (1:1.5:3) Type A1 of size 120cm long, 15x15cm cross section at bottom tapered to cross section 10cmx10cm at top duly reinforced with 4 Nos 10 mm dia TMT main bars and 8 mm dia TMT bar as stirrups @ 150 mm c/c and engraved with “LT 1.1 KV MES” to be installed at directed places.

Material and labour for mechanically woven double twisted hexagonal shaped, zinc coated steel wire mesh for gabion retaining wall, made with 80mm X 100mm mesh size, 2.7mm dia mesh wire, 3.40mm dia of edge/selvedge wire & 2.20mm dia lacing wire and box size as per table -1 of IS 16014 and all accessories such as U-clamp, thimbles and laid in position including closing after filling and all as specified in drawing and conforming to IS-16014-2012 complete all as specified and directed. NOTE : Maccaferri Environmental Solutions Pvt Ltd / Gabion Technologies India Pvt Ltd / GOMA PROTECT PVT LTD / A-1 FENCE PRODUCTS COMPANY PVT LTD / Saudagar Mal Mamman Lal Pvt Ltd.

Sub total

PROVISIONAL SUM FOR BASKET BALL GROUND AND VOLLEY BALL GROUND (Sch 'A' Part-XVI)

Lumpsum price worked out by the tenderer for Provisional sum of Rs 7,50,000.00 for following items including of earth work, concrete work, steel section etc complete all as directed. (i) Basket Ball Ground : 02 No. (ii) Volley Ball Court : 02 No. NOTE : Contactor shall be quote contractors percentage (amount) (plus or minus) pre-prices amount. *Add / Deduct ________ % (_______________ percentage) Rs. ___________________ * Above / Below SSR-2010 including all over head profit.

SHAMBHALA TRADERS

M/S TSERING DHONDUP

SARINS

M/S GLOBAL ROYAL CONSTRUCTION

M/ S N T ENTERPRISES