PROVISION OF BOUNDARY FENCING FOR 13 ACRES COAST GUARD LAND (SHAHANU VILLAGE) AT ICGS KAMORTA

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and including removing surplus soil to a distance not exceeding 50m and making good surface in soft / loose soil all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for MS framed work such as fencing posts and struts in fencing including cutting tops to shapevas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire/rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified and directed. Note: MS rod, flat iron and MS bolts shall be measured and paid seperately as supplied only

M&L for Mild steel screw bolts exceeding 12mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long for fixing of chain link fencing complete all as specified and directed

Supply only TMT bars for support to chain link fencing complete all as specified and directed Fe 410-W(Gde-E-250) quality-A.

Supply only MS flat iron as in fillets for securing wire mesh including all necessary drilling, boltinig or reveting etc and similar work confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F for Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surface of any description n.exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, to shafts, wells, cesepits, manholes, piers holes, etc., and not exceeding 10Sqm on plan and getting out in hard / dense soil complete all as specified and directed.

M&L for precast PCC solid block masonry exceeding 10cm in width using PCC 1:3:6, type C1 (using 20mm graded aggregate) set in CM 1:6 as in walls etc. complete all as specified and as directed.

M&L for rendering 15mm thick in concrete or brick surface in in CM 1:4 even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of chalk whitening on newly plastered surface of walls including preparation complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Provn of steel gate 5.5m wide x 2.1m height at end 2.4m at middle twin door type including RCC pillars etc., complete all as specified and directed.

Rajan Traders (BID ID -3086440)

A.G.Construction (BID ID -3085195)

AMR TRADERS (BID ID -3078415)

M/S RAJBUILDERS (BID ID -3080733)

saradhi construction combines (BID ID -3087972)

Kailash Engineering Company (BID ID -3079507)