REPAIR AND MAINT OF WATER SUPPLY AND LT PANELS AND CABLE AND CONNECTED WORKS AT SEVOKE MIL STN UNDER GE SEVOKE ROAD

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for laying/ taking out pipe line, cables, etc in soft/ loose soil complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for laying/ taking out pipe line, cables etc in hard/dense soil complete all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in each layer in soft/ loose soil complete all as specified and directed

Removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for PCC (1:3:6) type C2 using (40mm graded stone aggregate) as in foundations filling and mass concrete or any other works all as directed by Enginner- in -Charge

Taking up or down from any position existing GI water tubing and connections carefully including cleaning for refixing or removal to E/M store yard complete all as specified and as directed for following sizes:- Note :- Excavation/earth work shall be measured and paid seperately under respective item

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

Relaying/Fixing old serviceable water tubing, jointing and testing as obtained from item No. 6 here-in-before in new or existing position including all new fittings, ISI Marked, such as bends, elbow, tee, reducers, sockets, unions etc as required, laid in trenches, fixed to wall/celling or floors including making holes in wall where required complete all as specified and directed by Engr-in-charge for the following sizes:-

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

Supply, laying, jointing & testing galvanised iron tubing medium grade with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches complete all as specified and directed for the following sizes:-

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

S&F in repair gun metal gate/globe valve, ISI Marked, with iron wheel head screwed both ends for pipe including taking down unserviceable complete all as specified and as directed the following sizes:-

50 mm bore

40 mm bore

25 mm bore

20 mm bore

Cutting of existing cast iron/DI pipes in any position for insertion and fitting of new Tee, Coller, Tail pieces etc for taking out connections, branch connections complete all as specified and directed for the following sizes:- Note :- (a) Excavation/earth work shall be measured and paid seperately under respective item of schedule. (b) Cast iron fittings shall be measured and paid seperately as supply only under respective item of the schedule

200 mm bore

150 mm bore

100 mm bore

Taking out cast iron/Ductile iron/PVC/Cemented water mains including all fittings with flanged joints/tyton joints/ spigot and socket ends for the following sizes :-

200 mm bore

150 mm bore

100 mm bore

Supply, laying, jointing and testing of Ductile iron water mains Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed for the following sizes :-

200 mm bore

150 mm bore

100 mm bore

Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80mm to 200mm dia including taking out Unserviceable complete all as specified and directed .

Supply, fixing and testing cast iron fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 150mm dia including taking out Unserviceable complete all as specified and directed .

M&L for boring drilling, threading and tapping on existing cast iron mains of size 80 mm to 300 mm bore for connecting 15/20/ mm bore pipe by fixing on clamp made out of MS flat iron of size 40 x 3 mm made to required shape & size with GI socket duly welded, nut & bolts etc. complete all as specified and directed.

Repair to existing GI pipe line to prevent the leakage including cutting the pipe line in position and insertion of new fittings like sockets, tees, reducers, bends as required at site or welding of suitable size all as directed by Engr-in-charge for the following sizes :- Note:- GI fittings shall be measured separately as supply only

Supply only GI socket of following sizes:-

50 mm bore

25 mm bore

20 mm bore

Supply only GI union of following sizes:-

50 mm bore

40 mm bore

25 mm bore

20 mm bore

Supply only GI Nipple of following sizes:-

50 mm bore

40 mm bore

25 mm bore

20 mm bore

Supply only GI reducer socket of following sizes:-

50x40 mm bore

50x25 mm bore

40x25 mm bore

Supply only GI plug of following sizes:-

50 mm bore

40 mm bore

25 mm bore

20 mm bore

S & F Stack clamp made out of 50mm x 5mm, mild steel flat iron including nuts, bolts, gasket etc for the following sizes:-

200mm bore

150mm bore

100mm bore

80mm bore

M & L for taking out sluice valve, refacing, remetaling,regrinding and refixing of following bore dia, complete all as specified and directed:

200mm Bore

150mm bore

100 mm bore

S&F sluice valve PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engineer-in-charge.

200mm bore

150mm bore

100 mm bore

80 mm bore

M&L Burning out Lead Joint in Cast Iron Pipes 100mm to 150mm bore in any Position including recovering old Lead and caulking jute rope and run melted lead and caulking with chisel properly complete all as specified and as directed. Note- Excavation & earth work if required shall be measured and paid under appropriate Item as supply only. (ii) Lead and Jute rope will be measured and paid separately under respective items as supply only.

Supply only Lead

Supply only Jute Rope

S & F mechanical joint of following sizes, complete all as specified and directed:

200mm bore

150mm bore

100mm bore

Cleaning of over head/Under ground sump, RCC tank of following capacity by de- watering duly scraping the inner surface cleanig the same with bleaching powder including lime wash of the complete inner portion of tank all as directed by Engr-in-Charge. Note- (i) Cost sefty equipment such as sefty belt and Scafolding etc is deemed to included in the quoted item rate.

For 50,000 Gallon O/H tanks at 18 to 20 mtr height

For 40,000 Gallon O/H tanks at 18 to 20 mtr height

For 50,000 Gallon U/G tanks ( MAP Majors Area PH)

For 1,00,000 Gallon U/G tanks ( MAP Ors Area PH)

Dismantling of GI Pipe Connections from the Pressure Filter Plant capacity 6000 to 10000 Gallons, opening the Manhole and removal/taking out old Filter Media completely from Oxidation Chamber, Pre-filter, Iron Removal Filter and depositing the same to a distance not exc. 100 Metre and re-fixing the pipes in the original/existing Position after replacement of unserviceable PVC Nozzale (Dom type) including replacement of Gasket of Manhole Cover and necessary Bolts, Nuts, Washers, etc. as required, complete all as specified and as directed.

Supply and incorporation of MNO2 of size 1/8'' x 1/10'' as filter media of iron removal plant ,complete all as specified & directed.

Supply and incorporation of GRAVEL of size 1 1/4'' x 1 1/2''(collection sourceBARAKAR river bank) as filter media of iron removal plant complete all as filter media of iron removal plant ,complete all as specified & directed.

Supply and incorporation of GRAVEL of size 1/2'' x 1''(collection sourceBARAKAR river bank) as filter media of iron removal plant complete all as filter media of iron removal plant ,complete all as specified & directed.

Supply and incorporation of GRAVEL of size 1/4'' x 1/2''(collection sourceBARAKAR river bank) as filter media of iron removal plant complete all as filter media of iron removal plant ,complete all as specified & directed.

Supply & incorporation of SAND of size 1/6" x 1/8'' mesh (collection source BARAKAR river bank) as filter media of iron removal plant complete all as filter media of iron removal plant ,complete all as specified & directed.

Supply & incorporation of Anthracite grit of size 1/8" x 1/4'' as filter media of iron removal plant complete all as filter media of iron removal plant ,complete all as specified & directed.

Supply & fixing PVC strainers of sizes as dismantled of Make: PHI/RMCO, complete all as specified & directed.

M & L Painting to External Surfaces of Iron Removal Chamber, Pre-filter Chamber, Oxidation Chamber including Pipes complete of Fiteration Plant capacity 8000 GPH with Two Coats of Sythetic Enamel Paint of approved colour over a coat of Red Oxide Primer including neccessary preparation of surfaces, complete all as specified and as directed.

M&L Painting to Internal Surfaces of Iron Removal Chamber, Pre- filter Chamber and Oxidation Chamber including Pipes complete of Filteration Plant capacity 8000 GPH with Two Coats of Black Bituminous Paint (Lead Free) suitable for Drinking Water grade including necessary surface preparation by means of scraping, brushing, cleaning, complete all as specified and as directed.

Testing of water sample of various pump houses of sevoke militry station for bacteriological and chemical testing (systematic analysis) from government approved laboratory including submitting the report to the engineer in charge ,complete all as specified & directed.

M & L for Scraping old paint of Electric Panel (Internal and external surfaces) and Painting with two coats of synthetic enameal paint over a coat of red oxide primer including disconnecting electric connection and re-wiring without any damage of existing parts as directed by Engnr-in-Charge complete as all specified and as directed.

Supply & fixing in repair Pressure guage of capacity 210 kg/cm2. complete all as specified and as directed.

M & L for jointing of pipe of dia upto 200mm , shifted by elephant running over the river bed and formation of two PCC pillars for supporting of each length of pipe complete all as specified and as directed.

S&F 3 phase Digital panel volt Meter Flush Mounting 96x96mm, Accuracy Class-I, input voltage measurement range 17-520V AC (P-P), including taking out unserviceable complete all as specified and as directed.

S&F 3 phase 5A, Digital panel ammeter Flush Mounting 96x96mm, Accuracy Class-I, CT/PT Site programmable including taking down existing unserviceable one complete all as specified and as directed.

S&F 3 phase indicator lamp including taking down existing set complete all as specified and as directed by Engr-in-Charge

M&L for construction of valve chamber with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork, painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed of sizes 1200mm x 1200mm x1200mm (internnal dimensions) including demolition of existing valve chamber,complete all as specified and as directed.

Transporting defective Openwell submersible Pump of Capacity 5 to 20HP capacity to work shop, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing and drying, cable jointing, reassembling installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete as directed by Engr-in-Charge Note:- Spare parts shall be measured and paid separately as supply only.

Supply only of following parts of submersible pump of 5 to 20 HP capacity : -

CI stage casing

Bearing bush rubber

Stainless Steel sleeve at staging

Brass impellers

Neck ring brass

Key for impellers

MS stud with nuts of size of 3/8" X 2" for stage casing

Bush gun metal at intermediate section

Steel sleeve at intermediate section

CI intermediate section

M&L for transportation of defective pump set to workshop dismantling the same incl Disconnecting electrical connections decoupling 440 volt AC submersible motor pump set of following capacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing and drying, cable jointing and repair replacement of worn out parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete :- Note : Spare parts replaced shall be measured & paid seperately under respective item of schedule. Cost of rewiring and winding materials is included in item rate.

M&L for transportation of defective pump set to workshop dismantling the same incl Disconnecting electrical connections decoupling 440 volt AC Centrifugal electrical motor pump set of following capacities, dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing and drying, cable jointing and repair replacement of worn out parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete :- Note : Spare parts replaced shall be measured & paid seperately under respective item of schedule. Cost of rewiring and winding materials is included in item rate.

M&L for replacement of the following spare parts of decrine dozer :-

Pump tube (Part No :MCCP 207)

Injection check valve 3/8" diafram packet of 6 piece

Weighted suction line strainer 3/8" (Part No :ST 138)

3/8" White suction/Discharge tubing

Pump Shaft

M & L for chemical for drinking water treatment , calcium based granular high strength disinfectant chlorinating chemical having 65 % to 70 % chlorine content in granular form in 45kg drum. The Chemical should be of new batch number not more than 6 month old manufactured. Brand should be from any manufacturer aproved by E-in-c's branch.

M & L for Non Ferric Alum Crystal type, conforming BIS 260-2001 (2nd Revision), complete all as specified.

S&F Single Phase Preventor used for automatic Star Delta Stater with on delay timmer (2-3min) and auto manual switch, complete all as specified and as directed.

S&F flat submersible cable 3 core multi stranded copper conductor of size 6 sqmm. complete all as specified and as directed.

S & F in repair RGB fountain light water proof with all fittings complete all as specified and as directed.

Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note : Punned thickness shall be measured.

Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.

M&L for PCC (1:2:4) type B-2 (using 20 mm graded stone aggregate) for coping, grouting, finished even and smooth without using extra cement all as directed.

M & L for laying LT underground Cable, including takingdown existing u/s XLPE insulated, heavy duty armoured sheathed 1100 volts grade 10 Sq mm, 2 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified.

All as per item No 62 above but 16sqmm, 4 core all as specified.

All as per item No 62 above but 25sqmm, 3.5 core all as specified.

All as per item No 62 above but 35sqmm, 3.5 core all as specified.

M & L GI tubing of 40 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed.

M & L GI tubing of 50 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed.

M&L for boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items).

Supply and fixing thermoplastic polycarbonate cable junstion box having protection IP 66/67 "weather proof, dust proof, acid resistant, shock proof, fire retardent self extinguisher" for outside installation with knockout entry for cable of size 16 sqm 4 core and 155x210x92mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP all as specified and as directed.

M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron strip 25 x 4mm by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 32 mm bore light grade galvanised steel tubing for proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection.

Taking down overhead LT ACSR conductor from directed location all as specified and directed by Engr-in-Charge.

SRI SURAJIT SENGUPTA

M S ALOK SAHA

M S BHARAT CONSTRUCTION CO.

SHRI JIBANDHAN PAUL

M/S S.B. CONSTRUCTION

MARWA CONSTRUCTION