Construction of Link road from Brahmna basti khillian Kothewal GP Khillian and Baaircha ic Bridge in KM 0 0 1 500

Amount

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in static to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405By machnical Means

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in static to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405By machnical Means

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 – 1.0 kg/sqm using mechanical means.

P/L a priming/ tack coat with bituminous VG-10 @ 0.35 kg/ sqm on bituminous/priming surface, the surface shall be swept clean with the mechanical broom and high pressure air jet or by other means as directed by the Engineer-in-Charge as per IRC 16- 2008 clause 4.3.4, 4.3.4.4.3.4.2 and 4.3.5

Providing and Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing a suitable plant, laying and rolling with a three wheel 80 -100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified level, grade and cross fall using type A, type B and type C as per technical specification clause 510

KHALIL MOHAMMAD GOVT CONTRACTOR

LAJJA RAM

BALDEV RAM GOVT. CONTRACTOR

rehana