PROVIDING IMPROVED ACCESS TO WATER THROUGH HOUSEHOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME BARAN BLOCK and DISTRICT PATIALA

Amount

Pumping Machinery

Repair of old Submersible pumping Set complete in all respects.

Providing & fixing electric panel board consisting of electric appliances such as automatic STAR Delta Push Button or oil immersed Starter, Main Switch. Volt Meter, Ampere Meter, ELCB, Shunt Capacitor, Single Phase Preventer, Indicating Lamps, Kit-Kat etc.

Credit of old Electrical control pannel board

Providing & fixing automated Water Controller complete in all respects.

Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching powder solution/ Sodium Hypo Solution per hour under maximum delivery pressure upto 7 ka.cm 2 and suction lift not less than 1.5 m, as per DWSS standard specifications.

Repair of Pump Chamber

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Glass panes 4mm thick above 0.40 sqm area.

Painting two coats with synthetic enamel paints in all shades on old work.

Distempering with dry distemper of approved manufacture two coats on old distempetered surface.

Finishing walls with acrylic smooth exterior paint of required shade with two coats

Providing & fixing ceiling fan and Tubeset complete in all respects

Repair of RCC OHSR

One No. RCC OHSR 75000 ltrs capacity having height 19.00 mtr up to FSL and 22.00 m upto bottom slab has been already exists at site. The Repair of OHSR has been taken in this estimate.

Repair of leakage of Tank Wall and making it water tite

Painting of C.I Pipes and Specials complete in all respects

Repair of expansion joint

Cleaning of OHSR with Bleaching Power complete in all respects

Providing & Fixing manhole cover for OHSR complete in all respects.

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respect including cost of winding wire & aluminum painting complete in all respects as per standard Drawing and analysis

Providing & fixing angle iron pickets with angle 40mm x 40mm x 6mm including cost of concrete & painting complete in all respects as per standard Drawing.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Repair of MS Steel Gate and Paining complete in all respects.

Providing & fixing Sign Board complete in all respects

Distribution System & Household Connections

Repair of Leakage (Earth work excavation, bailing out water, connection with pipes and providing & fixing CI D-Joint for removing the leakage from existing pipelines as per analysis.

Providing, Stringing out PVC pipes 6kg/cm2 ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for street (with mechanical earth work)

PVC pipe 63mm o/d

Dismantling Brick or flanged stone flooring without concrete based Streets as per CSR item no. 8.19 and dry brick edge on paving with the dismantled bricks including sand grounting, complete in all respects.

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I. pipe lines 15mm i/d=4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On existing line)

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I. pipe lines 15mm i/d=4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Proposed line)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

80mm i/d Sluice Valves flanged

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Haudi (0.60 x 0.60 mtr) (per unit)

Goyal Tubewell store