8122/SAR-53/2022-23

Amount

Excavation in trenches in any type of soil i.e. loose/soft not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in width and getting out complete all as specified and as directed by Engineer-In-Charge.

All as per item No. 1 above but in hard/dense soil/cutting of road/hard standing/breaking of PCC etc complete all as specified and as directed by Engineer-In-Charge.

Returning, filling and including spreading, leveling and watering and well ramming in layers not exceeding 25 cm to achieve desired compactness as directed by Engineer-In-Charge.

Removing of excavated material/soil to a distance not exceeding 50 Mtrs and depositing at a level not exceeding 1.5 Mtr above the starting point all as directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) for repairing of valve chamber foundation etc including filling in road cuts/ hard standing etc all as specified and as directed.

M&L for Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.

M&L for 10mm thick cement plastering in cement mortar 1:6 on brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

Attending complaints of no water / leakage of water by removing float valve, water meter, stop cock etc or GI/composite tubing of size 15mm to 20mm bore upto 0.3 mtr length including all GI fittings like elbow, socket, Tee, Nipple, bend, union etc and making new threads as required at site including excavation,return refilling and removing soil & earth work etc. complete all as specified and directed.

All as per item No 8 but for 25mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item No 8 but for 40mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item No 8 but for 50mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item No 8 but for 80mm bore complete all as specified and as directed by Engineer-In-Charge. NOTE for Ser item No 8 to 12 : - (i) The cost of GI pipe upto 0.3 mtr and GI fittings shall be included in the quoted rated. (ii) Excavation and earth work required shall be measured and paid seperately. (iii) Complaints of urgent nature will be attended round the clock including Sunday & holiday to restore the water supply. (vi) Dewatering of accumulated water using engine driven pump set etc is deemed to be included in quoted rate. (v) Complaints given to contractor shall be rectified within 24 hrs. (vi) A penality of Rs 500/- per complaint will be charged for not attending the complaints and complete all as specified and directed.d within 48 hours. (vii) Contractor will arrange all the T&P/Diesel pumps for dewatering where ever required.

Taking up/out cast/ Ductile iron water mains including all fittings with spigot and socketed ends or flanged ends including burning out lead joints or dismantling flanged joints for pipe of following bore complete all as specified and directed. Note: (i) Excavation and earth work shall be measured and paid separately. Pipe of 80mm bore

All as per item No 13 but Pipe of 100mm bore omplete all as specified and as directed by Engineer-In-Charge.

All as per item No 13 but Pipe of 150mm bore omplete all as specified and as directed by Engineer-In-Charge.

All as per item No 13 but Pipe of 200mm bore omplete all as specified and as directed by Engineer-In-Charge.

Laying, jointing and testing cast iron/ ductile iron water pipes with flanged end or spigot and socketed ends here-in-before in any length including cleaning, cutting for reducing length as required, jointing as in trenches for following bore in new or old locations. (Excavation, earth work, joints, threading & CI specials shall be measured and paid separately). Pipe of 80 mm bore all as specified and as directed by Engineer-In-Charge.

All as per item No 17 but Pipe of 100mm bore all as specified and as directed by Engineer-In-Charge.

All as per item No 17 but Pipe of 150mm bore all as specified and as directed by Engineer-In-Charge.

All as per item No 17 but Pipe of 200mm bore all as specified and as directed by Engineer-In-Charge.

Material & labour for laying, jointing and testing Ductile iron water pipes 200mm bore class K-9 conforming to IS, in any length including jointing with push on rubber tyton joints, as in trenches of following bore in new or old locations. (Excavation, earth work & DI specials shall be measured and paid separately. However, the rate of Rubber tyton joints shall be included in the unit rate quoted).

All as per Item Sr No.21 but 150mm bore class K-7 complete all as specified and directed.

All as per Item Sr No.21 but 100mm bore complete all as specified and directed.

Supply Laying, jointing and testing cast iron water pipes with flanged end or spigot and socketed ends in any length including cleaning, cutting for reducing length as required, jointing as in trenches for 80 mm bore in new or old locations. (Excavation, earth work, joints, threading & CI specials shall be measured and paid separately).

Cutting existing cast iron pipe of following bore of any description for insertion of fittings and setting the pipe in proper alignment complete all as specified and directed. (Excavation earth work and fittings shall be measured and separately) Pipe of 80 mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.26 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.26 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.26 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

Material and labour of Run lead joints in repair including extracting old lead while removing the old joint to the following bores of water Supply Lines with spigot & socket ends including necessary earth work excavation in soft loose soil up to 1.5 mtr width and 1.5mtr depth returning and filling and well ramming including watering as required complete all as specified and directed by Engr-in-Charge. Note:- (i) The Joints are meant for laying new / old pipe & fittings and where Independent leaking joints to be ordered. (ii) Old lead as retrived may be used by the contractor under this item. Additional lead as required shall be arranged by the contractor. (iii) Excavation and earth work for independent joints shall be measured and paid separately. Pipe of 80mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.29 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.29 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.29 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

Run lead joint to the following bore CI pipe with spigot & socket ends complete all as specified & directed. Pipe of 80mm bore

All as per Item Sr No.33 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.33 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.33 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

Taking up or down old unsv steel water tubing of following bore from trenches or walls etc. complete all as directed. (Excavation and earth work shall be measured and paid separately). Pipe of 15mm bore

All as per Item Sr No.37 but Pipe of 20mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.37 but Pipe of 25mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.37 but Pipe of 40mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.37 but Pipe of 50mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.37 but Pipe of 80mm bore complete all as specified and as directed by Engineer-In-Charge.

Supply & Laying, Jointing Galvanized steel water tubing, medium grade of following bore, screwed and socketed joints with and including all required fittings as in trenches, floors, on walls etc complete all as directed. (Excavation and earth work for fixing in old location already considered in items for taking out and for new locations if required the same shall be paid separately). Pipe of 15mm bore

All as per Item Sr No.43 but Pipe of 20mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.43 but Pipe of 25mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.43 but Pipe of 40mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.43 but Pipe of 50mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.43 but Pipe of 80mm bore complete all as specified and as directed by Engineer-In-Charge.

Supply and fix in replacement gun metal glove or gate valve heavy duty ISI marked class-1 with iron wheel head, screwed both ends for iron pipe of following bore complete all as specified and directed Pipe of 15mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.49 but Pipe of 20mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.49 but Pipe of 25mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.49 but Pipe of 40mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per Item Sr No.49 but Pipe of 50mm bore complete all as specified and as directed by Engineer-In-Charge.

Supplying and fixing in replacement cast iron sluice valves ISI marked with hand wheel suitable for pipe of 200 mm bore, both ends flanged rating PN-1.6 with SS spindle including jointing with New MS nuts and bolts, washers and gasket etc all as specified and directed

Supplying and fixing in replacement cast iron sluice valves ISI marked with hand wheel suitable for pipe of 150 mm bore, both ends flanged rating PN-1.0 with SS spindle including jointing with New MS nuts and bolts, washers and gasket etc all as specified and directed

All as per item Sl.No 55 but for pipe of 100 mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 55 but for pipe of 80 mm bore complete all as specified and as directed by Engineer-In-Charge.

Construction of masonry pits of following size (internal size) for sluice valves with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangement hold fastand handle etc duly painted with two coats of synthtic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified inclding breaking of existing broken/ damaged valve pit the contractor can utilize retrived serviceable bricks. Size 60x60x60cm complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 58 but Size 90x90x90cm complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 58 but Size 120x120x90cm complete all as specified and as directed by Engineer-In-Charge.

Supply and fix Cast iron/ ductile iron fittings of size upto 300 mm bore for spigot and socketed pipes e.g. Bends (any type, radius and angle). Tapers any type (Straight, end, increasing, decreasing or double socket etc). Tee pieces single branch, 'Y' junctions double branches, crosses (all sockets or socket and spigot) collars caps and plugs conforming to Is complete all as specified and directed. (Excavation, earth work, & joints shall be measured and paid separately).

Supply and fixing 'D' joint complete set including nuts/bolts and rubber ring for repair to GI/ CI / DI pipe line of following size complete all as specified. Note:- Exc and earth Work shall be measured and paid separatly. Pipe of 50 mm bore

All as per item Sl.No 62 but Pipe of 80 mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 62 but Pipe of 100 mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 62 but Pipe of 150 mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 62 but Pipe of 200 mm bore complete all as specified and as directed by Engineer-In-Charge.

Materials and labour for drilling & tapping CI/DI/GI water mains of any size ( in position) for branch connection of the internal dia of size 20 mm including supply and fixing plain brass ferrules screwed both end 20mm bore and necessary earth work complete all as specified and directed by Engr-in-charge.

Repair to sluice valve installed at existing line of following bore by opening up, necessary repair comprising replacement of glands, gland packing, gaskets, facing the gate & valve seat, replacement of nut bolts, reassembling and fixing in position & testing complete all as directed. Note: -(i) Necessary arrangements for regulating the water supply in line for the purpose of repair shall be made by contractor at his own expenses. (ii) MS Spindle shall be measured and paid separately in the under mentioned item. Pipe of 80mm bore

All as per item Sl.No 68 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 68 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 68 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

Supply and replace MS Spindle complete all as specifiedand directed. Pipe of 80mm bore

All as per item Sl.No 72 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 72 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 72 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in replacement Bib Tap size 20mm bore dia of pipes standard PTMT and colour high pressure screwed for iron pipe and fixed with nipple/ elbow and socket if required all as specified and directed.

M&L for valve pit chamber cover in repair with 3mm thick sheet cover including angle iron frame 40x40x5mm duly painted with locking arrangement of size upto 1100x1100mm (or any fabrication required at site) with PCC for fixing of the same complete all as specified and directed by Engr-in-charge

Supply & Fix in replacement of FRP hypo-chlorine powder granules solution preparartion cum setting tank capacity 100 Ltrs with lid, port hole, inlet/outlet/drain connection level gauge etc and fitted with 1 phase 0.5HP motor and agitator rod complete with wiring all as specified and as directed by Engineer-in-charge

Supply & Fix in replacement of Decrin Dosing Pump, Pump Tube And White Suction 1 Decrin Dosing Pump, High Pressure Single Head Gear Motored Adjustable Dosing Pump With All Accessories with Pump Tube, injection check valve,foot valve, strainer etc - 02 Set spare, Make: Declibac Technologies Private Limited/ RAMCO

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting, chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, PVC/MS column pipes of size 32/40 mm etc and transporting the defective pump motor set to workshop, lowering the same after cleaning for any blockage /repair/new pump or motor set to the existing location including replacing the rubber packing/ GI nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 100 mm etc and transporting the defective pump motor set to workshop, lowering the same /repaired/ new serviceable submersible pump or motor set to the existing location including replacing the rubber packing/ GI nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

M&L and T&P for rewinding of submersible motor 30/35 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 30/35 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor upto 02 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump upto 02 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

Collection of water samples (with and without chlorination) from following bore wells/sumps in sterilized bottles all as per the standard instructions and guidelines of the Chief Water Analyst of Department of water and Sewage examinations from any NABL approved LAB, transporting the samples safely and getting the same tested for chemical and bactyeriological tests, with and without chlorination test from the same Institute and report submitted to this office complete all as specified and directed. Pump house No 1 complete all as specified and as directed by Engineer-In-Charge. Note : The water samples (with and without chlorination) shall be counted as 01 set of sample.

All as per item Sl.No 86 but Pump house No 2 complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 86 but Pump house No 3 complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 86 but Pump house No 4 complete all as specified and as directed by Engineer-In-Charge.

M&L for opening of pumpset from the installed position, dismantling of pump and motor assembly, complete servicing and cleaning of pumpset and refixing the same to the installed position complete all as directed and specified

Taking out the old unserviceable winding and cleaning the slots of motor, upto 7.5 HP and rewinding the same with and including PVC insulated copper wire of existing gauge ,weight, size etc complete including all insulations, varnishing, heating etc and making all connections & testing to make it functional complete all as directed .

Dismantling the pump of 7.5 HP cleaning, repairing, overhauling replacement of all unserviceable parts, nut, bolts, impellars, coupling, bearing, clutch system, and pump shaft . Re-assembling, commissioning and testing to make it operational/functional complete all as specified and as directed .

M&L for cleaning of swimming pool complete all as specified & directed for the following steps :- (a) Bailing out the dirty/ Muddy water settled at the bottom of swimming pool of size 25 mtr x13.5 mtr & depth 3.10 mtr ( Average depth) by using small submersible pump set/or Mannual Appx Qty of Muddy water 60,000 litre (b) Taking/ lifting out Alge/ Mudd deposited at the bottom of swimming pool by mannual labours & removing outside the swimming pool upto 50 mtr distance.(Appx qty- 01 Cum) (c) Cleaning the Swimming pool theroughly with water( water will bge supplied by Department) & cleaning the bottom, side walls/tiles of pool by using nylon bruses and detergents & non reactive chemicals theroughly including removing dirt/soopy water from the pool/ (Note: Tiles shall be cleaned/ brushed with water and detergents till the dirt and patches on the tiles are removed to the entire satisfaction of Engr-in-Charge. (d) All as per Serial Item No 44(c) above but baby pool of size 8 mtr x 5 mtr & depth 2 feet. (e) All as per Serial Item No 44(c) above but balancing tank(UG Sump) of swimming pool size having water capacity 50 cum Appx quantity of muddy water 10000 ltrs. (f) Taking/ lifting out Alge/ Mudd deposited at the bottom of balancing tank by mannual labours & removing outside the swimming pool upto 50 mtr distance. (Appx qty- 0.5 Cum)

Daily Cleaning of swimming pool bottom and side walls by using suction sweeper fitted with nylon brush all as specified and directed. Note: (a) Suction sweeper including brush will be used which is at swimming pool installation. (b) This job shall be done on daily basis upto the satisfaction of Engr-in-charge. (c) Electricity for suction sweeper will be provided free of cost by department. (d) Repair to suction sweeper including replacement of bolts, nuts, washers and servicing of suction sweeper pump etc., as and when required shall be provided by the contractor without any extra cost to the department. (e) The rate quoted shall be deemed to include the charges for divers for cleaning the side walls of swimming pool for every cleaning.

M&L for Nylon Brush for Suction Sweeper set complete fitted in Aluminium strips of metalicnead for Suction Sweeper complete all as specified and directed.

Supply only Algae Brush SS Bristles complete all as specified and as directed by Engineer-In-Charge.

Supply only Reinforced telescopic Handle not less than 8.0 mtr long complete all as specified and as directed by Engineer-In-Charge.

Supply only Deep Bag skimmer clip type complete all as specified and as directed by Engineer-In-Charge.

Supply and replacement of Nylone rope 20mm dia complete all as directed.

Supply only Water test Kit (CL & PH). complete all as specified and as directed by Engineer-In-Charge.

Supply & replacement of Nylon hose pipe 50mm bore, heavy duty complete with clamping of required size, nuts bolts and washers etc complete all as specified and directed.

M&L for Cleaning of Swimming Pool floor/walls by scrubbing the bottom of walls with a 5% Solution of copper sulphate/Diluted HCL Rinsing after about 15 minutes complete all as directed.

Dewatering of sump near swimming pool filter plant of internal dia 5 mtr and 7 mtr depth approx and cleaning by using with a 5% Solution of copper sulphate/Diluted HCL Rinsing after about 15 minutes complete first and then with plain water complete all as specified and diected.

Painting to existing MS pipe, machinery sluice valves, valve pit cover at Swimming Pool (except repaired under respective item of this schedule), jumping/dividing boards handles upper side of waste water with one coat of synthetic enamelled paint including preparation of surface complete all as directed and specified.

Supply and mixing filter alum (crystaline and clear) into Swimming Pool water for ensuring coagulation and trapping of suspended matter and colour in water in controlled manner to maintain PH value in the range of 7.2 to 7.6 @ approx. complete all as directed

Supply and addition of copper sulphate to Swimming Pool water for controlling and accummulation of organic/inorganic material complete all as directed

Supply and addition of Soda Ash in Swimming Pool as per site requirement for controlling the accumulation of slimis, complete all as specified and directed.

Supply only calcium hypo chlorite having at 60 to 70 % available Chlorine in granuales disinfectant in sealed container of 45 Kg plastic drum for water treatment as directed by Engineer in charge. Note:- Contractor must be provided orginal manufacturing's test certificate with Hologram.

S&F in replacement of ISI marked 3 way reflex multiport valve as per matching to existing type & shape with inlet & outlet connections of dia 50mm dia PVC pipes, for sand media filter tank with in built pressure gauge complete with fixing in existing media filter tank complete with all fixing accessories all as specified and as directed by Engineer-in-charge.

S&F in replacement of butterfly valve PN-10 of follwing sizes fixed in PVC heavy duty pipe complete with flanged end connections with new GI nuts/bolts etc complete all as specified and as directed by Engineer-in-charge Pipe of 50mm bore

All as per item Sl.No 110 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 110 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 110 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

M&L for repair of fixing of trolly mounted suction sweeper of capacity upto 1 HP and replacement of unserviceable parts i.e. bushes, bearings, sleeves, neck ring, rubber bushes including necessary machine work to shaft/impellor, reassembling and applying one coat of anti corrosive paint on outside surface all as specified and directed by Engineer-in-Charge.

Supply & fix as in replacement of (DOL) starter 1 phase, 230 volts suitable for suction sweeper of capacity 1 HP including fitting testing & commissioning all as directed. Make- Havells/C&S/L&T.

Supply & fix as in repair single phase preventor suitable for pump set 3 phase 415 volts including testing & commissioning all as directed.

S&F in replacement of Contactor suitable for motor upto 7.5 HP 3 phase 415 volts including testing & commissioning all as directed. Make- L&T/C&S/Havells

S&F in replacement of Over load relay suitable for motor upto 7.5 HP 3 phase 415 volts including testing & commissioning all as directed. Make- L&T/C&S/Havells

M&L for rubber gasket joints in flanged end cast iron pipes of following size and fittings complete with welding grinding work and including minimum 3mm thick rubber/fibre gasket and replacement of nuts/bolts/washers complete including dewatering etc all as specified and directed. Pipe of 80mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 119 but Pipe of 100mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 119 but Pipe of 150mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 119 but Pipe of 200mm bore complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs, Float ball valves of size 25mm high pressure brass body with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, Float ball valves of size 40/50 mm high pressure brass body with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, column GI medium grade pipe 100 mm flanged/screwed medium grade GI pipes with flanged ends, 3 mtr in length laid in trenches / fixed over ground in suction / delivery line including disconnecting the old pipe of size 100mm from any location i.e. water supply / sewage complete all as specified and as directed by Engr-in-charge.

M&L for MCCB 100 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :-L&T/ Legrand/ schinder

M&L for MCCB 125 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :-L&T/ Legrand/ schinder

M&L for MCCB 160 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :-L&T/ Legrand/ schinder

M&L for MCCB 200 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :-L&T/ Legrand/ schinder

M&L for Power Contractor 3 pole 3 phase Standard coil voltage 240/415 V, 50 HZ, Auxiliary contacts 2 NO+ 2 NC, Current rating 40 Amps, Make :-Legrand/ schinder

M&L for Power Contractor 3 pole 3 phase Standard coil voltage 240/415 V, 50 HZ, Auxiliary contacts 2 NO+ 2 NC, Current rating 32 Amps, Make :-Legrand/ schinder

M&L for single phase preventer model VSP 2, suitable to be fixed with FASD starter of any capacity for operation of the submerSI-ble pump motor, including taking out old U/S one complete all as directed

S&F Electronic timer type :- ST 100 operating voltage 240/415 Volts, 50 Hz, time delay range 12-120 Sec/ 3-30 Sec suitable o be fixed with FASD starter of any capacity for operation of the submersible pump motor, including taking out old U/S one complete all as directed

S&F in replacement of submersible starter panel for 2.0 Hp pump set single phase 50Hz complete all as specified and as directed by Engineer-in-Charge.

M&L dewatering, cleaning of reservoirs as follows:- (i) Dewatering the tank. (ii) Removal of left over dirty water and sludge (iii) Cleaning of wall ceiling and floor (iv) Removing of remaining sludge from the floor (v) Treatment of inside tank be exposing UV radiation kill the suspended or floating bacterial remaining in the tank. (a) OH RCC reservoir upto 50000 gallons capacity with staging of tank more than 15 mtrs but less than 28 mtrs hight. (loc : Near Pump house No 3 & 4)

Ditto as above but OH steel reservoirs of 20,000 gallons capacity (Loc : Near pump house No 1 & 2)

Cleaning of static water tank of dia 6.5 m and 5.0 m deep, pumping out the water, removing mud , ulgi silt, foreign particles, scraping of walls, bottom surfaces and washing with water and applying two coats of water prrof weather proof paint over putty repair work including painting on all steel frames/jhali, railings etc complete all as directed by Engr- in- charge.

M&L and T&P for dewatering the sewage collection well 6.60 metre dia, by removing all sewage material, mud, silt, ulgi etc including dewatering cleaning upto the floor. scrapping the walls, roof from inside the well and transporting of material to a distance exceeding 4 KM not exceeding 5 KM outside the AF stn complex complete all as specified and as directed.

M&L for Painting of entire OH tank after complete removal/scrapping of old surface, one coat wall primer and two coat of cement based paint. (Make:- Asian/Burger Snowcem/ Shalimar)

M&L for painting on MS/steel structures/member of OH tanks of height upto 25RM after complete removal of existing paint then apply one coat of red oxide primer and two coat of synthetic enamel paint complete.

Supply & Laying, Jointing/welding PPR water pipes,mono-layer PN 16 grade of following bore, including all required fittings as in trenches, floors, on walls etc complete all as directed. Pipe of 15mm bore complete all as specified and as directed by Engineer-In-Charge.

All as per item Sl.No 141 but Pipe of 20mm bore complete all as specified and as directed by Engineer-In-Charge.