Renovation of One Stop Center at Thanthani in Thanthani Panchayat

Amount

Renovation of One Stop Center at Thanthani in Thanthani Panchayat

Dismantling the Chipping of concrete and roughening the surface including all labour charges etc.complete

Dismantling the existing Pressed Tiles & Weathering Course including all labour charges etc.complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Pressed Tiles over the RCC roof slab in including all other labour charges etc., complete and one layer of pressed tiles set in c.m. 1:3 etc., complete.(New Tiles 100%)

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Plastering with cement mortor 1:3 mix 10mm thickness including cost of conveyance of all materials to work site and all labour charges etc.

White washing two coats using shell lime including cost and conveyance ofof all materials to work site and all labour charges etc.

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer

Painting two coats over old iron work with ready mixxed paint of approved colour and quality including cost and conveyance of all materials towork site and all labour charges etc. complete

Painting two coats over New iron work with ready mixxed paint of approved colour and quality including cost and conveyance of all materials towork site and all labour charges etc. complete

Supplying & Fixing in position of IWC

Supplying & Fixing in position of EWC

Construction of New Ramp - 2 Nos (Main Building & Toilet )

Earth work exacavation and depositing on bank with initial lead and lift in cll clauses of soils such as as per S.S.20B for narrow foundation etc. complete.

Filling with M.sand including cost and conveyance of sand to work site including all labour charges for filling etc complete

Cement concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials to site including all labour charges etc complete

Brick work in cm 1:5 including cost of bricks of size 8 3/4 x 4 1/4 x 2 3/4 including cost and conveyance of all materials of all materials to site and labour charges etc. Brick work in cm 1:5 including cost of bricks of size 8 3/4 x 4 1/4 x 2 3/4 including cost and conveyance of all materials of all materials to site and labour charges etc.

Plastering with cement mortor 1:5 mix 12mm thickness including cost of conveyance of all materials to work site and all labour charges etc.

Provision for Electrical arrangement [Providing 3 phase service]

Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.65)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125)

Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70

Supply and Fixing of 63 Amps DP Switch of 500V with Metal Clad with Fuse and Neutral SD 142

Supply and fixing 63 Amps 30 MA (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) (SD 139)ELCB

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall (SD 134) ELCB encloser box

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 234)

Supply and delivery 32 AMPS Fuse carrier

Supply and delivery 1" PVC pipe

Supply and delivery of specials

Supply and delivery 1" PVC bend

Supply and delivery 1" clamp

Supply and delivery 3phase indicater lamp

Supply and delivery indicater box

Supply and delivery 7/20 wire sleive

supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. (SD NO.88)

Supply and Fixing of 11 W CFL in the existing light point

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M. MOORTHY (BID ID -1532296)