Special repairs to the toilet block at Subbiah Nagar

Amount

CODE NO. 2.1.1 Earthwork in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m, as directed by Engineer-in-charge.

CODE NO. 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level-1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20mm nominal size. stone aggragate 20 mm nominal size)

CODE NO.4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement : 5coarse sand : 10 graded stone aggregate 40mm nominal size)

CODE NO: 5.12 Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands , copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

CODE NO.5.22.6 Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG / IISCO /SAIL / JSW) including placing the M30 grade Athees make cover block @ 60cm centre to centre

CODE NO. 6.1.1 Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

CODE NO.6.4.1 Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1cement: 4 coarse sand)

CODE NO. 6.12.2 Half brick masonry with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1cement: 4 coarse sand

CODE NO. 6.15 Extra for providing and placing in position 2 nos. 6mm dia MS bars at every third course of half brick masonry (with FPS bricks).

CODE NO. 9.134.1 Providing and fixing of 65mm Godrej Navtal lock of 6levers etc., complete.

CODE NO.10.5.2 Providing and fixing 1mm thick M.S. sheet door with frame of 40X40X6mm angle iron and 3mm M.S. gusset plates at the junctions and Corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30X6mm for diagonal braces and central cross piece.

CODE NO.: 10.27 Supplying and fixing of steel grill work of m.s. angles,flats,squares and pipes including cost of welding charges, fixing in position in masonry walls with cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nominal size) including one coat of priming coat etc. complete

CODE NO. 11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

CODE NO.11.36A Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture of approved make (Jhonson/Asian/somany/Nitco)in all colours, shades of size 200x300mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3(1 cement: 3coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete.- size200x300mm

CODE NO. 11.37 Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make (Bell / Jhonson / Regency /Somany / Naveen / Asian) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

CODE NO.12.20 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% intergral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) and finished neat complete.

CODE NO. 12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

CODE NO.12.42.4.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with out door 110X110X110mm.

CODE NO.13.1.1 12mm cement plaster of mix cement mortar 1:4 (1 cement : 4 fine sand )

CODE NO: 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

CODE NO.13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg /10 Sqm)

CODE NO.13.52.1 Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer specifications including appropriate priming coat, preparation of surface, etc. complete – On Steel work.

CODE NO: 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – Two or more coats on new work

CODE NO. 13.71 Lettering with black Japan paint of unit approved brand and manufacture. (Cost for 1 letter of 1 cm height)

CODE NO. 14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

CODE No. 15.3 Demolishing R.C.C.work, including stacking of steel bars and disposal of unserviceable material within 50 metres lead.

CODE NO.15.7.1 Demolishing brick work, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in mud mortar.

CODE NO. 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles above 10mm and upto 25mm.

CODE NO.15.23.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking

CODE NO. 16.94 Supplying fixing and commissioning of Suguna/ Texmo /Sharp 0.5 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete

CODE NO. 17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm.

Code No. 18.9.11 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 20mm nominal outer dia pipes.

Code No. 18.9.12 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 25mm nominal outer dia pipes

CODE NO. 18.17.1 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) – 25 mm nominal bore.

CODE NO. 18.18.1.2 Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats – 20 mm nominal bore

CODE No. 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank

CODE NO.18.49.1 Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 – 15mm nominal bore.

Elect.PSR.CODE NO.1.1.3.1.1 Supplying and fixing of following size of PVC junction box in required position along the line of PVC Conduit as required make : Avanplast/Vijaya 20mm dia junction box One way.

Elect PSR CODE NO.1.1.3.1.4 Supplying and fixing of following size of PVC junction box in required position along the line of PVC Conduit as required make : Avanplast/Vijaya 20mm dia junction box four way.

CODE NO.NPSR Providing and concealing / fixing of following sixe PVC bend. 20mm dia .

CODE NO.NPSR Providing and concealing / fixing of PVC round plate make: Kundan/Modi.

Elect.PSR Code No.1.3.14 Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 375mm X 150mm X 50mm. Deep

Elect.PSR Code No.1.5.1 Supplying and drawing of 1.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit/PVC casing and capping as required. Make: Finolex/Polycab:

EL PSR CODE NO.1.6.14 Providing and fixing of following size phenolic coated sheet on existing wooden board: - 375mm x 150mm x 3mm Thick

EL PSR CODE NO.1.7.1.1 Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make:Kundan/Anchor/Vinay .

EL PSR CODE NO.1.7.1.3 Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make:Kundan/Anchor/Vinay:-

EL PSR CODE NO.1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make:Kundan/Anchor/Vinay :-

EL PSR CODE NO.1.7.1.6 Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make:Kundan/Anchor/Vinay:-

Elect.PSR CODE NO.1.7.2.1 Supplying and fixing 3plate, 5amps ceiling rose on the existing junction box/ wooden block including connections etc., as required. Make: Kundan/Anchor/Vinay

CODE NO.NPSR Providing and laying of 8 SWG copper wire for earthening (4.0mm dia)

CODE NO.NPSR 6.00Sqmm Weather proof multi standard alminium wire.

CODE No.Non PSR Supplying and fixing of Bulk head fitting aluminIum alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100w type) Make: Philips/Bajaj.

CODE NO. NPSR Providing and fixing of ISI certified 36W CFL lamp for Pendent holder Make : Philips.

Elect.PSR CODE No.11.12 Providing and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor power cable of 11KV grade of size exceeding 25sqmm but not exceeding 120sqmm on surface as required.

SENTHIL KUMAR

P. Seethapathy

M GANDHIRAJ

R Parthasarathy