Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹13.1 L+₹13,520 (1.04%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance Due to higher rates | |
| 3 | L3₹14.1 L+₹1.2 L (9.18%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L3 | Rejected-Finance Due to higher rates | |
| 4 | L4₹15.8 L+₹2.8 L (21.9%)Rejected-Finance 16 BAITHAKKHANA ROAD 16 BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH KOLKATA | L4 | Rejected-Finance Due to higher rates |
Tender Value
₹11.9 L
EMD Value
₹23,800
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
GE LEKHAPANI TINSUKIA ASSAM PIN 786180
REPAIR TO CERTAIN BR WORKS IN EM INSTALLATION AT MIL STN LEKHAPANI
2022_MES_565780_1
8707/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
LEKHAPANI
Class E Category a(I)
8 documents required · 8 mandatory
₹500
GE LEKHAPANI
₹23,800
Yes
30 Jan 2023
28 Nov 2022
7 Jan 2023
28 Nov 2022
31 Dec 2022
12 Dec 2022
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and directed by Engr-in-Charge.
Material and labour for prepration of newly plastered surface of wall and applying two coat of cement base paint over a coat of cement base acrylic primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out soft/loose soil complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specidfied and as directed.
Returning, filling incl spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specidfied and as directed.
Material & Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Material and labour for Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius as in half brick thick walls built in CM 1:4 complete all as specified and as directed.
Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
Material and labour for RCC design mix M-25 (using 20 mm graded stone aggregates) as in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and as dirceted.
Material and labour for RCC design mix M-25 (using 20 mm graded stone aggregates) as in columns, pillars, posts & struts completeall as specified and as dirceted.
Use and waste of form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete.all as specified and as directed.
Use and waste of form work to sides of square or rectangular columns, pillars, posts and struts for rough finished flat surfaces of concrete complete all as specified and as dirceted.
Supply and fixing Mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as dirceted.
Supply and fixing Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as dirceted.
Supply and fixing for rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and as directed.
Supply and fixing Expanded metal cut to length bent to shape weight n exc 4 Kg per square metre required and tying with and incl annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel stapls complete all as specified and as dirceted.
Material and labour for 2nd class hardwood Plain fillets,square, rectangular or triangular in section Exc 6 sqcm & nexc 13 Sqcm , clean sawn, secured with nails or brads complete all as specified and as dirceted.
Supply and fixing Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties/tie bars for roof/Chain link including securing bolts complete all as specified and directed
Supply & Fixing mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
Supply and fixing framed work of rolled mild steel section as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing conforming to Fe-290 (GdeE165) complete all as specified and as directed..
Supply and fixing mild steel best quality lathe machine made floor bushes and pintal hinges for steel gate welded to existing gate complete all as specified and as directed. Note:- Any additional Mild steel member welded shall be masured and paid separately
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing debris to the premises complete all as specified and as directed.
Material and labour for PCC (1:3:6) , Type C1, (using 20mm graded stone aggregate) as in foundation concrete drain and surface channels etc complete all as specified and as directed.
Material and labour Extra for forming fair finished drain or channel inner girth 30cms in cement concrete using extra cement incl forms moulds mitred/stopped ends etc complete all as specified and dircted
Material and labour for PCC (1:2:4) ,type B-1 (using 20 mm graded stone aggregate) in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating complete as directed including necessary form work complete all as specified and as directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) including removing debris to the premises complete all as specified and as directed .
Dismantling of stone slabs and tiles of any description or thickness in floor, approns laid bedded and pointed in any mortar including removing debris to the premises complete all as specified and as directed.
Material & Labour for PCC (1:3:6) , type C-2, (using 40mm graded stone aggregates) in sub base of path/Paving complete all as specified and as directed.
Material and labour for Chequered cement conc tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry as in floor over and including a layer of 15mm thick screed bed / bedding layer of cement mortar (1:6) complete all as specified and as directed
Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.
Material and labour for providing precast cement concrete (1:2:4) ,type B-1 ( using 20mm graded stone aggregate) as in precast manhole cover slab set in cement mortar 1:6 complete all as specified and as directed
Taking down steel gates from its position and repairing the same including thorughtining alignment properly including welding additional stiffner, brases, pintol hinges , locking arrangement etc and erecting the same back in position after applying one coat of synthetic enamel paint in area of gate n.exc 5.00 Sqm each leaf complete all as specified and as directed (Note : Necessary MS sections such as angle, pipe, bars, flats , lathe /bush Pintol hinges shall be finished with necessary greasing and the same shall be be measured and paid seperately by weight under relevent items)
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed
Supply and fixing factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.complete all as specified and as directed.
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Notes :- (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (ii) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified.
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of thickness 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately
Supply and fixing 200 mm size long , aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
Supply and fixing 250mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.
Supply and fixing 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed.
Supply and fixing 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
Material and labour for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
Material and labour for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
Material and labour for glazed coloured ceramic tiles of size 450mm x 300mm x 7mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles as in vertical surface such as dado / skirting laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed.
Material and labour for coloured non skid joint free ceramic tiles of 7mm to 8mm thick (Approx Size 400x400) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.
Material and labour for water proofing treatment to RCC roof comprising with APP (Atactic Polypropylene Polymer) base polymeric membrane 3 mm thick (minimum) weighing 3.5 Kg/Sqm reinforced with polyester non-woven fabric (weight not less than 160 gms/sqm) laid on surface applied with bituminous primer @ 0.40 litres per sqm, by torch application method with overlaps shall be minimum of 150 mm on the transverse direction and 75 mm on longitudinal direction including cleaning the surfaces with brooms / cotton clothes over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:3 with using and including water proofing compound as per manufacturer's instruction and carrying out water proofing test against leakage and seepage after taking down existing treatment complete all as as directed and as specified
Hacking out old broken glass (any thickness, size, quality or description), from wooden frames, glazed with putty or fixed with beads complete all as directed.
Supply and fixing 2.5mm to 3mm thick PVC transparent window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed
Material and labour for complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc by skilled labour complete all as specified and as directed
Material and labour for preparation of old painted surfaces of walls and applying two coats of cement base paint including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .complete all as specified & directed.
Material and labour for preparation of old plastered surfaces of walls and applying two coats of colour wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .complete all as specified & directed.
Material anf labour for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified & directed.
Material and labour for preparation of new or previously untreted steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer including cleaning, stopping and rubbing down and removing all dropings etc. complete all as specified and directed.
MAA COMMUNICATION
M/s PRABIR ENTERPRISE
M/s HALDER ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .