COMPREHENSIVE REPAIR TO MES COLONY AND SUPPLY DEPOT AND REPAIR TO ROOF SHEET, FALSE CEILING, WATER PROOFING AND ALLIED WORKS IN AREA OF AGE B/R II UNDER GE (WEST) JABALPUR

Amount

Repair to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed.

Reapir to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed.

Easing of door shutters for easy closing / opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts, including necessary builders hardware with new screws etc complete all as specified and directed.

S&F, in repair, fancy type PVC coated MS draphery rods with brackets, 20-25mm bore, cut to length as required and of colour as approved by GE, complete all as specified & directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repair 18 mm thick prelaminated coloured solid PVC sheet suitably fixed in Mild Steel angle frame work as in cupboard, cabinet, drawer etc as per Manufacturer's specification and drawing complete all as specified and directed.

Hacking out old broken glass ( of any size and quality or description) from wooden or steel frames glazed complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handles, screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes, complete all as specified and directed.

S&F, in repair, chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed.

S & F, in repair, Brass chromium plated bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable for 15mm bore of pipe of approved quality, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore stop valves/ Angle cock, chromium plated, screwed down, high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

All as per above item but length 600mm

S & F Health Faucet size 15 mm, chromium plated, with flexible tube etc complete all as specified & directed

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

M & L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon, handle lever, float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar (1:6) complete all as specified and directed.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and making good to match with the existing surface of floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to outgoing pipe and flushing pipe complete all as specified and directed.

S&F plastic water closet seat, white/ black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F vitreous china wash basin, white, flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs Sheet glass assembly 5.5mm thick sheet glass, corner type, including chromium plated brass screws and wooden/ plastic cleats/plugs complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 25 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 40 mm bore GI tubing complete all as specified and directed.

Supply & laying CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

S&F 25mm bore tubes, medium grade, galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S&F 40mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

Taking down of eaves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length, with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length, with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends, ISI marked, any radius of 110 mm bore with access door complete all as specified and directed.

Dismantling water tanks capacity exc 500 Ltr but n exc 1000 Ltr and removing from site complete all as specified and directed.

S&F double layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), capacity 500 Ltr hoisted and fixed in position complete all as specified and directed.

S&F double layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed.

S&F in repair 15mm bore bib tap Standard of PTMT any colour as approved by GE, high pressure, screwed for iron pipe and fixed complete all as specified and directed.

Dismantling brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using fly ash bricks with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

Ditto all as per Srl item No 45 above but except brick ( Note : Serviceable bricks retrieved against dismantling shall be re-used)

Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick plaster in CM (1:4) on brick wall, finished even & smooth without using extra cement in patches complete all as specified and directed.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B1 (20mm graded crushed stone aggregate) as in floors, finished even & smooth without using extra cement in patches complete all as specified and directed.

M & L for 25 mm thick Cement concrete (1:2:4) type B-1 ( using 20mm graded crushed stoneaggregate), as in floor bedding complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC( 1:4:8), type D2(using 20 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L providing, cement concrete (1:2:4), type B1 ( using 20 mm graded crushed stone aggregatet) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, conforming to IS 15658-2006, 60mm thickness, M 35 Grade of concrete laid over and including 50mm thick sand cushioning complete all as specified and as directed.

M&L for grinding and polishing surfaces of old Kota/marble/granite stone flooring, skirting etc by hand or grinding machine, dusting off the surfaces after grinding, washing and mirror polishing complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM (1:6) complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM (1:6) complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc., set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of coloured tiles, laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M & L coloured Glazed ceramic tiles in vertical serfaces 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, over and including 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces as backing for tiles complete all as specfied and directed.

M&L 20-25mm thick Cudappah stone slab on cooking platform/shelf over cement screed base laid and jointed with grey cement slurry mixed with pigment to match with the shade of stone slab, over and including 20mm thick screed bed in CM (1:6), including rubbing and polishing and cutting of holes for gas pipe complete all as specfied and directed..

M&L 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

M&L 18-20mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 20 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with the shade of slab including cutting, rubbing, grinding and mirror polishing complete all as specfied and directed.

M&L 18-20mm thick machine cut kota stone slab as in skirting,risers of steps, laid over and including 10 mm thick rendering in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specfied and directed.

Preparing newly plastered surfaces of walls and apply two coat of cement base paint over a coat of appropriate primer complete all as specfied and directed.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash on walls complete all as specfied and directed.

M&L two coats of oil bound distemper (acrylic) white or tinted over one coat of chalk whitening/primer including preparation of newly plastered surfaces of walls etc complete all as specfied and directed.

M&L for PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S & F in repair vitreous china half stall urinal white including connection to flushing pipes and out going pipes & brackets etc complete all as specfied and directed.

S & F, in repair, urinal spreader, chromium plated, for fixing with 15 mm bore pipe etc complete all as specfied and directed.

PVC (SWR) vent cowl suitable for 110 mm bore pipe complete all as specfied and directed.

PVC (SWR) floor trap with grating 75 mm dia including jointing with solvent cement complete all as specfied and directed.

S&F PVC waste pipe, size 32 mm, flexible with coupling for WHB/Sink/Urinal etc complete all as specfied and directed.

S&F in repair CP brass soap tray/dish of approved make etc complete all as specfied and directed.

Taking down existing aluminium door shutter with frame, area exceeding 1 Sqm and re-fixing in same opening after repair complete all as specfied and directed. (Note :- The defective parts (any type of aluminium section) will be measured and paid for separately as "supply only".)

Supply only aluminium anodized snap bead 20mm wide fixing glass with EDP gasket complete all as specfied and directed.

supply and fix in repair brass mortice Lock with all fittings for aluminium door complete all as specfied and directed.

Supply only aluminium handle size & shape as per existing handle for aluminium door complete all as specfied and directed.

Supply only floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

S & F in repair sinks with drainage board, made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specfied and directed.

Taking down chowkhat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specfied and directed.

Taking down Shutter exc 1 sqm but n.exc 2 Sqm each complete all as specfied and directed.

S&F 24 mm thick PVC flush door shutter having one side lamination with 2mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+0.25) thick Prelam PVC sheet of denisity 600 Kg/ cubic metre, manufacured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube, other hardwares should be fixed with 25 mm x 8 mm size steel screws etc complete all as specfied and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube in opening as per specification complete all as specfied and directed.

S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium window sliding type three track(Bombay sliding type) without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters , fixed type, without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed

S&F steel windows with side hung shutters factory made including box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specfied and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conforming to Fe -290, Gde E-165 complete all as specfied and directed.

M&L two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new surface of steel, over 10 cm width or girth complete all as specfied and directed.

S&F galvanised MS wire cloth, 0.56mm nominal dia of wire, average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specfied and directed.

S&F 100 mm long aluminium butt hinges alloy with galvanised MS hinge pin, anodised and fixed type C-21 complete all as specfied and directed.

S&F 150mm long aluminium anodised barrel tower bolt and fixed complete all as specfied and directed.

S&F 125mm long aluminium anodised handle cast type and fixed complete all as specfied and directed.

S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specfied and directed.

M&L two coat of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface, over 10 cm width or girth complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specfied and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specfied and directed.

M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specfied and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantlings, unframed, 40SqCm and over in section, in any position complete all as specfied and directed.

S&F FI 40 x 6mm as in wind tie fixed with self tapping screw complete all as specified and directed

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-0 or fe 250-0 complete all as specfied and directed.

Supply only angle Iron / MS plate / MS sheet for welding where ever required for repair work complete all as specfied and directed.

M&L for preparation of old treated wall surfaces including brooming down or steel wire brushes, scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement based paint complete all as specfied and directed.

M&L for preparation of old wall surfaces including brooming down or steel wire brushes, scrapping down smoke, soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specfied and directed..

M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scrapping down smoke, soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specfied and directed.

M&L for preparation of old treated surfaces of wall and applying one coat of distemper Oil emulsion, white or tinted, complete all as specfied and directed.

M&L for subsequent coat of distemper oil emulsion, white or tinted, over one coat applied under Srl item 111 above, complete all as specfied and directed.

M&L for one coat of synthetic enamel paint on old decorated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specfied and directed.

M&L for applying one coat of weather proof emulsion on old treated surfaces, white or tinted, complete all as specfied and directed.

M&L for applying two coat of weather proof emulsion on prepared surfaces including complete removal of existing treatment on walls using mechanical scrapper, white or tinted, complete all as specfied and directed.

M&L for one coat of synthetic enamel paint on old decorative surfaces of steel over 10cm width or girth including preparation of surfaces complete all as specfied and directed.

Dismantling walll and ceilling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/bblankets, any thickness including cover fillets E-grid frame work complete all as specified and as directed.

S & F 4mm Non asbestos fibre cement building boards fixed or laid /inserted to GI frame work and fixed in ceiling flat or sloping as in repair, GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm, fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with Hangers 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long as in repair complete all as specified and directed.

M&L for black colour Solid ACP wall lining consisting of 2mm thick plain colour ACP sheet inclusive of solvent cement and fixing at site on aluminium frame and all necessary fixings and prepration of surface complete all as specified and directed.

M&L for SS Box Type Letters ,Letter Height -12" to 18", No. of Letter up to 40,White ACP for Glowing of SS Letters including installation charges complete all as specified and directed.

M&L for MES LOGO 0.5m-1m Height with LED Module & Power Supply , including installation charges complete all as specified and directed.

Roughening surfaces of old concrete floor/terrace by picking including taking down existing deteriorated / decayed tarfelt, PCC tiles or any type of treatment including loose surface, scrapping with scrapper, chiseling, scrapping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scrapped materials debris to a distance not exc. 250 m complete all as specfied and directed.

M&L for 10 mm thick screed bed or bedding layer in CM (1:3) mixed with liquid water proofing compound as per Manufacturer's instructions, on concrete roof surface, finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. ( Note : Liquid Water Proofing compound shall be measured and paid separately as "supply only".)

M&L for Providing water proofing treatment over cleaned roof surface (work to be executed in Patches in different buildings) with super thermo APP modified water proofing memberane comprising of the following for roofs

Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster complete all as specified and directed.

One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces complete all as specified and directed.

One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm, 3mm thick, reinforced with polyster non woven fabric shall be unrolled surfaces with side lap of 100 mm and the end lap of 150mm and the over lap shall be sealed by flame complete all as specified and directed.

Applying aluminium paint on top of membrane @ 0.10Kg/Sqm complete all as specfied and directed.

S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and directed.

Dismantling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.

M&L 2nd class hard wood in scantling, clean sawn, timber framed and fixed complete all as specified & directed.

Welding in repairs n. exc 2.5cm in length, thickness of metal to be welded not exceeding 6mm, complete all as specified and directed.

M & L preparation of old wooden surfacesof any description over 10 cm width or girth & applying two coat of synthetic enamel paint complete all as specified and directed.

M&L two coat of synthetic enamel pinting over a coat of red oxide primer including preparation of new surface of steel, over 10 cm in width or girth complete all as specified and directed.

Disconnecting existing tanks exc 250 Ltr but n exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specfied and directed.

Disconnecting existing tanks exc 500 Ltr but n exc 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Schedule of credit amount of Rs 1,94,330.00 to be deducted during AOC

Rai Construction Co

RAVINDRA ELECTRICAL

DEEPAK CONSTRUCTION

Sachdeva Enterprises

M/S Modern builders

RAVI ENTERPRISES