PROVN OF SHED FOR OUTDOOR UNIT OF CHILLER PLANT

Amount

Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around. In layers n. exc 25cm, in Soft/loose soil complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed.

S&F steel work in tubular truess including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 St grade St-240 complete all as specified and directed.

S&F MS Fe 290 (Gde E-165) quality- B plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete for post holes complete all as specified and directed.

M & L for two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as specified and directed.

M&L for coloured 12mm toughed glass doors/window including eatching all necessary fiting fixuters & Godrej or link 7 lever lock self , including BIOMERTIC LOCK any size/ type complete all as specified and directed by Engr-in charge ( for door size 1.8x2.8 mtr)

M&L for coloured 12mm toughed glass doors/window including eatching all necessary fiting fixuters & Godrej or link 7 lever lock self , including BIOMERTIC LOCK any size/ type complete all as sfd and directed by Engr-in charge ( for window size 1.8x1.20 mtr )

S&F Collapsible steel gates, top hung, consisting of channel pickets pivoted flat bars top and bottom runners brass handle etc as specified erected in position and securing runners with holdfast and brackets rollers etc , complete all as specified and directed.

M&L for cutting holes in brick walls built in cm for inserting hold fasts and making good dismantled portation in cm (1:3) or PCC (1:2:4 ) type B-1, exc half brick but n exc. One brick etc complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Surface dressing not exc 15 cm deep and averaging 15 cm deep and getting out in soft/loose of soil complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness grade laid over including 25mm thick sand cushioning including filling of joints with sand with grey cement pigment complete all as specified and directed.

Demoliton of cement concrete (un reinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding, benching on existing roof slab to slope as per existing or as directed finished surface even and fair complete all as specified and directed.

Provision of roof treatment consisting of the following items (i) M&L for rendering 15mm thick in cement mortar (1:3), over concrete surfaces finished even and fair and mixed with liquid water proofing compound @ 2% of cement complete all as specified and directed. (Note: WPC will be measured and paid separately). (ii) M&L for applying evenly a of bituminous primer at the rate of 0.30 liters per sqm including cleaning surfaces (iii) M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application 100 mm thick outtopping on joints and 150 mm ourtopping at ends, membrane shall be laid by welding tourch complete all as specified and directed. Note : The work shall be carried out by the authorized applicator of manufacturer of items.

M&L for brick tiles 40mm thick over roof treatment laid over and including 15mm thick screed bed in cement mortar (1:6) mixed with and including polymer based liquid water proofing additive @ 200 ml liquid water proofing compound by 50 Kg weight of cement (1 Bag) or as per manufacturers specification and joints of brick tiles shall be filled with cement mortar (1:4) mix with and including 5% cruse oil complet all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L for preparation of new APP based polymeric water proofing membrane surface applying two coats of aluminium paint @ 0.1 lit per sqm in each coat complete all as specified and directed.

Disconnecting existing water tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

M&L for taking up or down steel tubing and connections 20mm bore, including cleaning for refixing complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for refixing old steel tubing and connections 20mm bore, in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S Rakesh Singh

M/S AM ENTERPRISES

M/S SURISONS

FRIENDS N FRIENDS

M/s NSA Engineering Corporation

M/s Techno India and Company

HIMANSHU TRADERS