REPAIR/REPLACEMENT OF ELECT FITTINGS AND FIXTURES INCL REWIRING TO CERTAIN OTM AT 1 (I) R AND O FLT, VEER LINE, ENGR LINE, TPT LINE AND REST CAMP AREA AND COMPREHENSIVE MAINT OF DG SETS ELECT CONTROL PANEL AND CONNECTED ITEM OF WORK UNDER GE RANCHI

Amount

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall, floor etc, complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type, complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed.

M&L point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (Note- Modular cover plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one, bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 4 here in before but using 2.5 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common erath dolly.

M&L point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (Note- Modular cover plate of any module with all fittings are included in point wiring.)

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one, bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 6 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one, bell switch 5 Amps

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 8 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly, complete all as specified and directed.

S&F modular switch piano flush type, single pole, one way, and 5/6 Amp single module, complete all as specified and directed.

S&F for modular Switch piano flush type, single pole, one way, and 15/16 Amp single module, complete all as specified.

S&F for modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type, complete all as specified and directed.

S&F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type, complete all as specified and directed.

S&F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply, complete all as specified and as directed.

S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one, complete all as specified and directed.

S&F ceiling fan regulator switch type, step type, flush type heavy duty, 120 watts suitable to work on 230 volts Ac supply including removal of old unserviceable one, complete all as specified and directed.

S&F for bell push modular 6 Amps single module, complete all as specified and directed.

S&F bell push , flush type, 5 amp , complete all as specified and directed.

S&F bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply, complete all as specified and as directed

S&F for Lamp holder, PVC body suitable for batten fitting, complete all as specified and directed.

S&F ceiling rose, surface Bakelite suitable ISI marked for batten fitting, complete all as specified and directed.

S&F switch piano flush type, single pole, one way, and 6 Amp, complete all as specified and directed.

S&F for Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type, complete all as specified and directed.

S&F in replacement of switch socket combinations flush 5 Amp 5 pin, complete all as specified and directed. ,ISI marked

S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, complete all as specified and directed.

M&L Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 2.5 sqmm cable and one run of PVC casing caping will be measured as one unit, complete all as specified and directed.

M&L sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit, complete all as specified and directed.

M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10.0 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including with two runs of PVC insulated 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- four runs of 10.0 sqmm cable, two runs of 6.0 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit, complete all as specified and directed.

S&F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and as directed.

S&F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 Amps with extended terminals, complete all as specified and directed.

S&F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 100 Amps with extended terminals, complete all as specified and directed.

S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting, complete all as specified and as directed. Make :- Bajaj, Philips, Havells.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. Make :-Bajaj, Philips, Havells.

S&F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provosion of LED bulb 10/11 watts, complete all as specified and as directed. Make- Havells, Philips, Bajaj.

S&F LED 10 watts batten aluminium extruded (mirror light) with decorative end caps complete all as specified and as directed. Make- Bajaj, Havells, Philips.

S&F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb, complete all as specified and as directed. Make :- Bajaj , Philips, Havells.

S&F IP 65 rated LED bollard with robust design and efficient light distribution 10 Watt. Make: Crompton/ Havells/ Philips

S&F highly efficient LED Bulbs, 10 W, of make Bajaj, Havells, HPL, complete all as specified and directed

S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed, complete all as specified and as directed

S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

S&F MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

S&F MCB Single pole and neutral rated capacity 40 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

S&F MCB Single pole and neutral rated capacity 63 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

S&F for MCB Single pole rated capacity 40 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

S&F for MCB Single pole rated capacity 63 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

S&F for MCB Single pole rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one, complete all as specified and as directed.

Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4 mm dia GI suspension wire, one twin core cable of size 10 Sqmm multi -strand, complete all as specified and directed.

All as per item No 50 above but size 6 sqmm twin core cable.

All as per item No 50 above but size 4 sqmm twin core cable.

S&F Fan condenser, 2.5 mfd, 240 volts for ceiling/Exhaust fan including PVC clamp at different locations as per site given by Engineer-in-Charge.

S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed.

S & F for LED post top lantern (gate light) 20 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed.

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Maintenance and servicing to DG set including attending faults on call basis for normal repairs including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolant levels of capacity 250 KVA DG set, complete all as specified and as directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) The work of maintenance shalll be carried out through respective authorized dealer whose certificate shall be produced to Engineer - in - charge. (iv) Proper record & test results of the same shall be maintained as directed. (v) Work shall be carried out at site at different location

All as per item No 58 above but capacity 82.5/75 KVA DG set.

All as per item No 58 above but capacity 63 KVA DG set .

All as per item No 58 above but capacity 30 KVA DG set

All as per item No 58 above but capacity 20/15 KVA DG set.

Supply and replace only Diesel filter element with 'O' ring suitable for 250 KVA DG set, compete all as specified and as directed.

All as per item No 63 above but capacity 82.50/75 KVA DG set.

All as per item No 63 above but capacity 63 KVA DG set.

All as per item No 63 above but capacity 30 KVA DG set.

All as per item No 63 above but capacity 20/15 KVA DG set.

Supply and replace only Spin- on filter element for lubricating oil with 'O' ring suitable for 250 KVA DG set, compete all as specified and as directed.

All as per item No 68 above but capacity 82.50/75 KVA DG set

All as per item No 68 above but capacity 63 KVA DG set.

All as per item No 68 above but capacity 30 KVA DG set.

All as per item No 68 above but capacity 20/15 KVA DG set.

Supply and replace only by pass filter element with 'O' ring suitable for 250 KVA DG set, compete all as specified and as directed.

All as per item No 73 above but capacity 82.5/75 KVA DG set.

All as per item No 73 above but capacity 63 KVA DG set.

All as per item No 73 above but capacity 30 KVA DG set.

All as per item No 73 above but capacity 20/15 KVA DG set.

Supply and replace only air filter element suitable for 250 KVA DG set, compete all as specified and as directed.

All as per item No 78 above but capacity 82.5/75 KVA DG set.

All as per item No 78 above but capacity 63 KVA DG set

All as per item No 78 above but capacity 30 KVA DG set.

All as per item No 78 above but capacity 20/15 KVA DG set.

Supply and replace Fan Belt complete suitable for 250 KVA DG set, compete all as specified and as directed. Make :- Fenner/ Dunlop.

All as per item No 83 above but capacity 82.5/75 KVA DG set.

All as per item No 83 above but capacity 63 KVA DG set.

All as per item No 83 above but capacity 30/20/15 KVA DG set.

Supply and replace only Belt for battery charging alternator complete suitable for 250 KVA DG set complete all as specified and as directed. Make :- Fenner/ Dunlop.

All as per item No 87 above but capacity 82.5/75 KVA DG set.

All as per item No 87 above but capacity 63 KVA DG set

All as per item No 87 above but capacity 30/20/15 KVA DG set

Supply and replace only Rubber Hose pipe set for water circuit with clamps complete suitable for 250 KVA DG set compete all as specified and as directed.

All as per item No 91 above but capacity 82.5/75 KVA DG set

All as per item No 92 above but capacity 63 KVA DG set

All as per item No 93 above but capacity 30/20/15 KVA DG set

Supply and replace only Engine oil, multi grade premium Genuine oil 20W/ 40 as per manufacturer recommendations in DG sets, complete all as specified and as directed. Make :- Indian oil/ Hindustan Petroleum/ Castrol/ BPCL

Supply and applying Petroleum Jelly (01 Kg plastic sealed container), complete all as specified and as directed. Make :- Indian oil/ Hindustan Petrolium/ Castrol/ BPCL

Supply and fill distilled water for topping up in lead acid batteries, complete all as specified and as directed.

Supply and fill electrolyte of suitable specific gravity for lead acid batteries in sealed container, complete all as specified and as directed.

S&F Battery leads of PVC insulated, multistranded, copper conductor of size 70 sqmm of 1.25 mtr long each duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations complete including removal of extg unserviceable one, complete all as specified and as directed.

S&F battery terminal brass clamps including removal of extg unserviceable one, compete all as specified and directed.

S&F water temperature guage including sensor and cable complete as per sample including removal of existing unserviceable one, complete all as specified and as directed.

M&L dismantling the radiator taking to work shop for overhauling & cleaning, de-scaling with acid, removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads, hoses, clips, etc and refixing its original position for following capacities of DG set, complete all as specified and directed

15.00 KVA DG set to 30.00 KVA DG set

62.50 KVA DG set to 83.00 KVA DG set

250.00 KVA DG set

M&L repair and calibration of FIP and injectors from authorised dealer for petty repairs to make the FIP functional as per standard calibration procedure and norms including replacement of minor spares, gasket etc for smooth functioning of FIP and refixing its original position including testing at site for following capacities of DG set, complete all as specified and as directed.

15.00 KVA DG set to 30.00 KVA DG set

62.50 KVA DG set to 83.00 KVA DG set

250.00 KVA DG set

M&L repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 24 volts with necessary connections incluing testing and commissioing, complete all as specified and as directed.

M&L repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 12 volts with necessary connections incluing testing and commissioning, complete all as specified and as directed.

M&L repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, corbon brushes of capacity 24 volts including testing and commissioning complete all as specified and as directed.

M&L repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, corbon brushes of capacity 12 volts including testing and commissioning complete all as specified and as directed.

S&F AVR (automatic voltage regulator) control unit assembly suitable for 15 KVA DG set to 82.5 KVA DG set including removal of extg unserviceable one, compete all as specified and directed.

S&F AVR (automatic voltage regulator) control unit assembly suitable for 250 KVA DG set including removal of extg unserviceable one, complete all as specified and directed.

S&F fuel steel braided pipe with benjo bolts and washers etc of length 30 cm long including removal of existing unserviceable one, compete all as specified and as directed.

S&F fuel steel braided pipe with benjo bolts and washers etc of length 45 cm long including removal of existing unserviceable one compete all as specified and as directed.

S&F for canopy hinges for acoustic doors with suitable bolts and nuts of DG set including removal of existing unserviceable one compete all as specified and as directed.

S&F for Anti vibration pads with suitable bolts and washers including removal of existing unserviceable one compete all as specified and as directed.

S&F for digital type frequency meter 96 x 96 mm flush /square pattern including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge. Make- L&T/AE or equivalent

S&F LED indicator lamps R, Y, B with holder 15 mm screw type including removal of extg unserviceable one, compete all as specified and directed. Make- Rishab/ L&T/AE/ Legrand or equivalent

S&F Power Contactor 415 Volt, 50 Hz AC suitable for DG set control panel/ AMF panel for following capacity of DG set including removal of existing unserviceable one, compete all as specified and directed. Make:- Simens/ L&T/ ABB/ C&S/ Schneider.

15.00 KVA DG set to 30.00 KVA DG set

62.50 KVA DG set to 83.00 KVA DG set

250.00 KVA DG set

S&F time delay relay suitable for 15.00 KVA DG set to 83.00 KVA DG set including removal of extg unserviceable one, compete all as specified and directed. Make:- Simens/ L&T/ ABB/ C & S

S& F time delay relay suitable for 250.00 KVA DG set including removal of extg unserviceable one compete all as specified and as directed. Make:- Simens/ L&T/ ABB/ C & S

S&F solenoid switch assembly 24 volts suitable for 250 KVA DG setincluding removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

S&F solenoid switch assembly 12 volts suitable for 15 KVA DG set to 83 KVA DG set including removal of existing unserviceable one, compete all as specified and directed.

S&F self starter assembly 12 volts complete suitable for 15 KVA DG set to 83 KVA DG set including removal of existing unserviceable one, complete all as specified and directed. Make:- Lucas/ TVS

S&F self starter assembly 24 volts complete suitable for 250 KVA DG set including removal of existing unserviceable one, complete all as specified and directed.

S&F DC alternator assembly 24 volts suitable for 250 KVA DG set including removal of existing unserviceable one compete all as specified and directed.

S&F DC alternator assembly 12 volts suitable for 15 KVA DG set to 83 KVA DG set including removal of existing unserviceable one, compete all as specified and directed.

S&F electronic speed control unit assembly 12 volts suitable for 15 KVA DG set to 83 KVA DG set including removal of existing unserviceable one, compete all as specified and directed.

S&F electronic speed control unit assembly 24 volts suitable for 250 KVA DG set including removal of extg unserviceable one, complete all as specified and directed.

S&F SMPS (system main power supply) type control unit assembly suitable for 12 volts battery charger for including removal of extg unserviceable one, compete all as specified and directed.

S&F SMPS (system main power supply) type control unit assembly suitable for 24 volts battery charger for including removal of extg unserviceable one, compete all as specified and directed.

S&F single phase preventer suitable for operation on 415 Volts 50 Hz AC supply including removal of existing unserviceable one, complete all as specified and directed. Make :- L&T/ Minilec/

S&F battery low maintenance lead acid of capacity 12 volts 180 AH with initial charging including removal of extg unserviceable one and hand over to store yard, compete all as specified and directed. Make:- Exide/ AMCO/ Amaron

S&F battery low maintenance lead acid of capacity 12 volts 150 AH with initial charging including removal of existing unserviceable one and hand over to store yard compete all as specified and directed. Make:- Exide/ AMCO/ Amaron

M&L welding MS pipe heavy duty 100 mm dia suitable for exhaust manifold of DG set with necessary scraping cutting to size as required and painting with two coats silver paint over a coat of redoxide primer including removal of extg unserviceable one, compete all as specified and as directed.

M&L control wiring of the DG set upto 83 KVA complete with provision of additional auto cables heavy duty suitable for generator set applications including removal of existing unserviceable one compete all as specified and directed.

M&L control wiring of the DG set 250 KVA complete with provision of additional auto cables heavy duty suitable for generator set applications including removal of existing unserviceable one, compete all as specified and as directed.

M&L Top overhauling only of DG set of following capacities of kirloskar/Cummins/Crompton Greaves make including replacement of gaskets and Oil sump packing set etc, testing on full load up to entire satisfaction of Engineer-in-Charge, complete all as specified and directed.

15.00 KVA DG Set to 30 KVA DG Set

62.50 KVA DG Set to 83.00 KVA DG Set

250.00 KVA DG Set

S&F solenoid valve suitable for following capacity of DG sets for smooth function of DG sets including removal of existing unserviceable one, complete all specified and directed.

15.00 KVA DG set to 30.00 KVA DG set

62.50 KVA DG set to 83.00 KVA DG set

250.00 KVA DG set

M&L Engine complete overhauling of DG set capacity 250 KVA by opening the top cover complete including dismatlling the engine head, cylinder liner and piston assembly, crankshaft assembly, radiater fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge all as directed (Note :- Measure spare parts will be measured and paid seperately under relevent items)

Supply only Piston assembly

Supply only Piston ring set

Supply only full engine gasket

Supply only Main bearing set

Supply only Main cylinder liner

Supply only Main cylinder head copper sleeves

Supply only Lock nut

Supply only Big end bearing

Supply only Timing Belt

Supply only benjo bolt

Supply only Timing belt tension adjuster

Supply only inlet valve

Supply only Exhaust Valve

Supply only head gasket

Supply only oil pump assembly

Supply only Thrust washer

Supply only Crank case gasket

Supply only Head nozzle plug set

S&F pressure gauge 0 to 7 Kg/ sqcm along with sensor and cables for DG set including removal of existing unserviceable one, complete all specified and irected.

S&F microprocessor based multifunction relay suitable for DG sets operation of any capacity and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per site requirment including removal of existing unserviceable one complete all specified and directed.

S&F connecting and testing MCCB in existing Panel of the following capacity, suitable for 415 volts, 50 Hz, with extended terminals type, inter locked to prevent opening when the Switch is in ON Position, connecting and testing complete including removal of exiting unsv, complete all as specified and directed. Make:- L&T/ ABB/ Siemens/ Schneider.

4 pole 63 Amps with thermal magnetic release breaking capacity 16 KA, Ics=100% Icu

4 pole 100 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu

4 pole 125 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu

4 pole 160 Amps with thermal magnetic release breaking capacity 36 KA, Ics=100% Icu

4 pole 200 Amps with thermal magnetic release breaking capacity 36 KA, Ics=100% Icu

4 pole 250 Amps with thermal magnetic release breaking capacity 36 KA, Ics=100% Icu

M&L cleaning of fuel tank of DG sets of any make and capacity including replacement of fuel level indicating tube and markings, complete all as specified and directed.

M&L painting of DG set with two coats of spray painting with synthetic enamel paints as per colour code after preparation of old painted surfaces and writing SM/MES Nos etc all as directed for the following capacity :-

Upto 83 KVA Capacity

250 KVA capacity

M&L checking of fan hub including minor repair if any for 250 KVA DG set and checking for alignment, complete all as specified and directed.

M&L checking of fan hub including minor repair if any for upto 83 KVA DG set and checking for alignment, complete all as specified and directed.

Supply rubber mat of 1 Mtr x 2 Mtr x 19 mm ISI marked

Supply electric rubber hand gloves as per sample suitable for 33 KV

Supply only empty barrel heavy duty made of steel of 220 L capacity for collection of FOL, complete all as specified and directed.

S&F in replacement of turbo kit suitable for 250 KVA DG set

S&F in replacement of turbo kit suitable for upto 83 KVA DG set

S&F in replacement asbestos rope 20 mm dia for tightly covered the silencer exhaust pipe etc complete all as specified and direceted

S&F wooden board of size 2 m x 1.2 m with colour chart/ diagram/ name plates/ details of installations made out of bakeite hylem sheet, ISI marked, 3 mm thick , cutting to shape /size including fixing of adhesive transperent filament including cutting of filament of letters/ figures/ diagrams/ details of suitable size/ type all as directed including fixing to the wall by wooden screw and PVC hold fast etc complete all as directed and specified. Note :- Matter/ figure/ chart/ diagrams shall be given by the Engineer- in- Charge

S& F connecting and testing open execution on load change over in existing DG set Panel of the following capacity, suitable for 415 volts, 50 Hz, with extended terminals type, interlocked to prevent opening when the Switch is in ON Position, connecting and testing complete including removal of exiting unsv, complete all as specified and directed. Make:- ABB/ Siemens/ Schneider/Legrand.

4 pole 63 Amps

4 pole 100 Amps

4 pole 125 Amps

4 pole 160 Amps

4 pole 200 Amps

Supply and fill genuine coolant in 5 ltrs plastic sealed container for topping up in Radiator of DG set located at different locationscomplete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strip 32 x 6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate no 3 of SSR part I of 2009 including necessary excavation and earth work GI pipe 20mm dia light grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 Type B1 (20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to panel board as indicated including testing, complete all as specified and directed.

S&F and taking down unserviceable electronic fuel pump for 250 KVA DG set as per sample shown, complete all as specified and directed

S&F rotary barrel pump of cast iron material with dual direction operation flow rate of 4 L/20 turns for taking out petrol/diesel from barrels.

S&F illumination LED glow board of which front side will be of acrylic material showing 'MILITARY ENGINEER SERVICE LOCKET POWER HOUSE' / 'MILITARY ENGINEER SERVICE PUMP HOUSE NAMKUM' of size 10 feet x 2 feet x 9 inch and back side of decorative fancy material, complete all as specified and directed.

Raj Construction

BHARATI ENTERPRISES