Improvements work arrangements at Ground floor VIP room in thamukkam convention centre ward 31

Amount

Supply and Installation of Air Conditioner with Copper Coil including labour charges etc Complete 1.5 TR Split Type AC Unit (Five Star Rated)

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay etc Complete

Supply, fabrication and fixing of Ms Channel for Mounting the Air conditioning Oudoor Unit

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and Fixing for PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER (4.0 sq.mm etc Complete

Supply and Fixing for Vertical blinds including Labour charges etc Complete Vertical blinds - Ordinary

Supply and Fixing for Brass chromium plated soap tray of size 150mm x 100mm including labour charges etc Complete

Supply and Fixing for Brass chromium plated towel rail 60cm long and 20mm dia with Brackets including labour charges etc Complete

Supply and Fixing for LED Outdoor Fittings (Light Emitting Diode) Higher End 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED

Supply and Fixing for 20 W LED Tube Light for T 8 Fitting (single side) including Labour Charges etc Complete

Supply and Fixing for AC Exhaust Fan 450 mm (18”) sweep (Light duty) including Labour Charges etc Complete

Supply and Fixing for MS/Fibre Louvers shutters arrangements for 450mm AC Exhaust Fan including Labour Charges etc Complete

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supply and Fixing of 1200mm (48") Sweep AC Ceiling Fan Complete (Higher End) With 2 module 100W Fan Step Regulator (Higher End) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and Fixing for Wall Mounting Fan inlcuidng Labour Charges etc Complete 300 mm Sweep

Supply of Automatic Electrical Water Heater with copper container, with Glass Wool/ Puf insulation with MS powder coated shell suitable for 25 Litres capacity 230V/1000W (Higher end) WATER HEATER WITH ISI MARK

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Providing two coats of damp proof putty over the wall surface to levelling the undulation in the walls of approved make. The rate including cost of putty, sand paper and labour charges for smoothening the surface etc., complete.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc ,complete as per standard specification. - 10 sq.m

Add GST 18%

PR Construction And Company (BID ID -1091933)