SPL REPAIR OF AC SHEET, FLOOR TILING, FALSE CEILING, DOOR AND WINDOW INCL ELECTRIC FITTING AND CEILING FAN IN BLDG NO T-332, T-333 AND T-334 OF 108 INF BN (TA) MAHAR UNDER GE SAUGOR

Amount

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) exc 1.50 but n exc 4.00 Sqm each, complete all as specified.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) n exc 1.50 sqm each etc removing to or from store, complete all as specified.

M&L for Pressed steel frames (1.25 mm thick) for doors of size (125X60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed by Engineer-in-Charge.

S&F 2nd class HW 35 mm thick glazed and skeleton shutters of door open rebated and prepared to receive glass gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, shutters as specified in SSR Part -I, Section 8, clause 8.20 (a) complete all as secified and directed by Engineer-in-Charge.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ( double or single shutter), complete all as specified and directed.

M&L for PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) as in filling in door frame/ Chowkhat etc, complete all as specified and directed.

S&F mild steel work as in hold fasts, plain angle cleats for securing purlins and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in filling of hold fast , kneelers, apex stones,bed plates etc, complete all as specified and directed.

M&L for Preparing surface of wood & wood based materials, steel & iron work, new or old, of area exc 0.10 Sqm but n.exc 0.50 Sqm each & treated with tar or coal tar black paint, complete all as specified.

Ditto all as per item no 9.00 as above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc., area n exc 0.10 sq. m each complete all as specified.

M&L for Sanding newly tarred or painted surfaces with clean sharp sand, complete all specified.

S&F Steel windows and ventilators with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified & directed by Engineer-in-charge.

S&F Steel windows and ventilators with side hung shutters including Box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified & directed by Engineer-in-charge.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. Note: Weight shall be verified by the GE.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/ springs clips and S&F 3 mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.50 sqm in each pane.

S&F 3mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.50 sqm in each pane.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-charge.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

S&F MS 150 mm, ordinary rat tail rod pattern springs including roller and roller plate, complete as specified

S&F mild steel Butt hinges, 100 mm size, medium weight, cold rolled fixed with screws/ welding to wooded/ steel frames or chowkhats, complete all as specified

S&F Aluminium anodised tower bolt 200 mm long of extruded section, complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified.

S&F Extruded aluminium alloy handles 125 mm long , fabricated type anodised, complete all as specified.

S&F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring all as specified

Dismantling of floor, hearth or wall tiles/ terrazo including cement mortar bedding, removal servicable tiles to store and rubbish off the premises, all as specified and directed..

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor.

Demolition of brick work or rubbled stone masonry including all qoins arches, pillars etc built in cement mortar.

Demolition of Roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work Cement concrete (unreinforced)

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc. complete all as specified.

M&L for RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified.

M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified.

M&L for TMT bar 6mm to 8mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips, complete all as specified.

M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement provided with construction joint 10 x 20mm filled with bitumen and sand mortar (1:3) complete all as specified.

M&L for providing 100 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified.

M&L for polished Machine cut kota stone slab as in flooring 20 to 22 mm thick size not less then 550mm X 550mm over 20 mm thick screed in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

M&L for Kota stone slab 16 -18 mm thick as in skirting, steps riser etc over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

M&L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar (1:6), complete all as specified and directed.

M&L for providing 100 mm thick cement concrete (1:4:8) type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified.

M&L for sand filling under interlocking tiles 25mm thick including watering and consolidating, complete all as spefcified

S&F Machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment etc .

M&L for Providing cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate), as in coping, apex stone, bed plate, kerbs including weathering, slightly rounded or chamferred angles and throating and incl. necessary form work etc.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick on brick work or conc surfaces in CM (1:6), finished even and smooth without using extra cement all as specified.

M&L for two coat cement plaster ,first coat 10mm thick CM (1:6) and second coat cement plaster 5mm thick in CM (1:4) with WPC finished even and smooth without using extra cment. Note: WPC will be paid seperately under respective item.

M&L for taking down cement plaster in crack width exc 150mm n exc 250mm including supply & fixing of Chicken wire mess with nails and rendering 15mm thick on brick work or conc surfaces in CM (1:4), finished even and smooth without using extra cement all as specified.

M&L for preparation of surfaces of old decorated walls etc, properly making of V shape cracks and filling of all cracks with cracks seal of walls & complete removal of existing treatment and applying Birla/ JK wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed by Engr-in-charge. Make: Asian ACE or equivalent as approved by the GE.

M&L for preparation of new wall surfaces and applying Birla / JK wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed by Engr-in-charge. Make: Asian ACE or equivalent make as approved by the GE.

M&L for preparation of old surfaces of walls by complete removal of existing treatment from walls & by properly making of V shape cracks and filling of all cracks with cracks seal of walls and applying Birla / JK wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified.

M&L for preparation of new surfaces of walls and applying Birla / JK wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer, complete all as specified.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L for prepration of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for prepration of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer, complete all as specified.

Demolition of existing ceiling boards (fiber, pulp, insulation etc) or insulation board/ slabs/ blankets, any thickness, including frames.

S&F GI (cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section (bottom pre-coated) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire of dia 4 mm as per manufacturer instruction as in ceiling with and incl S&F white Non Asbestos designer ceiling cement boards 4 mm thick of size 595 mm x 595 mm complete all as specified and directed. Make: Everest or equivalent make as approved by the GE.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified.

S&F Pre-coated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self driving screws complete all as specified & directed.

S&F Pre-coated galvalume aluminum zinc coating GI based ridge Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ150) as in roof covering/ cladding to wall, fixed with self driving screws, complete all as specified & directed.

Dismantling framed timber scantlings 40 sqcm & over in section, in any position

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, in any position.

S&F mild steel flat iron for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165, complete all as specified & directed. Note: Weight shall be verified by the GE.

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16 to 20 mm, complete all as specified and directed. Note: Weight shall be verified by the GE.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete, all as specified and directed. Note: Weight shall be verified by the GE.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. Note: weight shall be verified by the GE.

S&F in repair 25 mm bore stainless steel pipe curtain rod including stainless steel brackets & decorative dome, suitable for door/ windows curtain with fancy type powder coated MS dooms with SS brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc, complete all as specified and directed by Engineer-in-charge.

Taking down copper/ aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting, wooden boards, bell push, call bell, MCBs & regulators etc, making good to disturbed surfaces & matching with the existing colour of wall floor etc.

Taking down main switch, DB of any capacity.

M&L for concealed point wiring with 1.5 Sqmm PVC insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square TW Mica Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green (Make–for cable - Havells/Polycab/Finolex.

For one light, fan point controlled by one switch

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

Ditto all as per item No 67.00 here in before but for power point wiring using with 2.5 sqmm PVC insulated, unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt. Make:- Plaza octa series/Havells Reo /Anchor

S&F socket outlet , 5 pin, 5 Amp flush, 230 Volt Make:- Plaza octa series/Havells Reo/Anchor

S&F switch piano type flush, single pole, one way,15Amp 230 Volt . Make:- Plaza octa series/Havells Reo/Anchor

S&F socket outlet 2 in 1, 6 pin, 5/15 Amp ,flush type universal shuttered 230 Volt complete. Make:- Plaza octa series/Havells Reo/Anchor

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal. Make:- Plaza octa series/Havells Reo/Anchor

S&F lamp holder modular type insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb. Make:- Plaza octa series/Havells Reo/Anchor

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make:- Legrand/ L&T/Havells

Ditto all as per item no 75.00 above but SPN 32- 63 Amps, 240 V. Make:- Legrand/L&T/Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make:- Legrand/L&T/Havells

S&F electronic double space rotary step type 5 speed regulator 120-280 V. Make:- Plaza octa series/ Havells or equivalent as approved by the GE.

Taking down and refixing connecting ceiling fan with painting all as specified and directed by Engr-in-Charge.

M&L for LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corrosion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brightness. Make: Havells Cat Part N0 LUMILINEBS20WLED830SPCWH 4 feet or eqvt make in Phillips/ CG/ Wipro

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

S&F ENDURA RUGBY NEO N - IP65 Environmental friendly ultra modern energy saving surface mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LEDs. Make:- Havells Cat part no RUGBYNEONFT10WLED860SSYMTOPC or eqvt in philips/wipro

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 10 sqmm 2 core as specified and directed. Make- Polycab/Plaza/Havells

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out in any type of soil.

M&L for sand cushioning in trenches for the cable etc all as directed by Engr-in-charge. Note: Punned thickness shall be measured & paid.

Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete.

Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level n. exc 1.50 mtr from starting point.

S&L kiln brunt bricks sub class B laid in trenches for cable protection complete.

S&F GI Pipe light grade 25 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers)

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

M/S MOHAN SINGH

v k builder

siddhant construction

A Raza Enterprises

maharaja construction and suppliers

M/s JAYPEE ENTERPRISES