Regarding the appointment of holder of material supply for all work n the Gram Panchayat Warud (Bha.) under the Mahatma Gandhi National Employment Guarantee Scheme for the financial year of the year 2019-2020

Amount

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Hire charges of Pump set of capacity 4000 litres/hour

Vibrator (Needle type 40 mm)

Hire and running charges of Tripod and Mechanical Winch machine complete with power unit and accessories

Hire and running charges of tipper

Hire and running charges of loader

Hydraulic Excavator (3D) with driver and fuel

pin vibrator

Hire and running charges of light crane

Hire and running charges of crane 20 tonne capacity

Water tanker 5000 Ltr. Capacity

Dozer D-80-A12

Hydraulic Excavator of 1 cum bucker

Front end loader 1 cum bucket capacity (incl POL)

Vibratory roller 8 to 10 tonne

Smooth Wheeled Roller 8 to 10 tonne

Water Tanker 5 to 6 KL Capacity

Air Compressor

Hire charges of TATA 407 or equivalent for local shifting

Hire charges of Diesel truck - 9 tonne (without POL)

Welding charges of shear key to existing reinforcement

Seam bolts and nuts 6 mm dia and 25 mm long

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):25 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 12.5 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 06 mm nominal size

Safeda ballies 125 mm diameter

Cowdung

Bamboo 25 mm dia 2.5 meter long

Bitumen grade PMB - 40

Blown type petroleum bitumen of penetration 85/25 of approved quality

Bitumen felt fibre base (vegetable or animal): Type 2 grade 1

Coal Tar

Blasting powder

Blasting fuse (fuse wire)

Brick bats

Portland Cement

White cement

Sealant primer

Brass tower bolt (barrel type) 250x10 mm

Brass tower bolt (barrel type) 200x10 mm

Oxidised mild steel sliding door bolt 250x16 mm

Anodised Aluminium butt hinges 125x75x4 mm

Fuel wood

Cement Concrete Jali 50 mm thick

Dry hydrated lime (factory made)

Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre

Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre

Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre

Moorum

Dry distemper

Oil bound washable distemper/ Acrylic distemper

Linseed oil (double boiled)

Cement Primer

Pink primer (for wood)

White cement based putty

Aluminium paint

Enamel paint

Synthetic enamel paint in black or chocolate shade

Plastic emulsion paint

water proofing cement paint

Wax polish (ready made)

Ordinary varnish

Superior copal varnish

Superior spar varnish

Putty for wood work

Royalty for good earth

Coarse sand (zone III)

Fine sand (zone IV)

Mild steel round bar 12 mm dia and below

Mild Steel round bar above 12 mm dia

Twisted steel/deformed bars

Structural steel such as tees, angles, channels and R.S. joists

Galvanised steel J or L hooks 8 mm dia

Mild steel bolts 6 mm dia and 25 mm long with hexagonal head

Galvanised steel bolts 10 mm dia and 7 cm long with nuts

Bolts and nuts up to 300 mm in length

Bolts and nuts above 300 mm in length

Rolling or ramming of ground turf (Grass

Through and bond stone size 24 x 24 x 39cm

Stone for masonry work

Stone for pitching 15 cm x 22.5 cm

Stone grit 6 mm and down size or pea sized gravel

Superior class teak wood such as Dandeli, Balarshah or Malabar in planks

Water proofing materials

Wire nails

Wire mesh (rabbit)

Chequered terrazzo tiles 22 mm thick (medium shade)

Rubber base Adhesive

C.I. bracket for wash basin and sinks

Brass bib-cock-15 mm dia

Brass stop-cock 15 mm dia

S.C.I. gully or nahani grating 100 mm dia

Mirror of superior make glass 60x45 cm

Flush pipe with union spreaders and clamps all in C.P. Brass for single stall

G.I. pipes 15 mm dia

G.I. pipes 20 mm dia

G.I. pipes 25 mm dia

G.I. pipes 32 mm dia

G.I. pipes 40 mm dia

G.I pipes 50 mm dia

G.I. pipes 65 mm dia

G.I. pipes 80 mm dia

G.I.tees (equal) 25 mm

S.C.I. plain bend 100 mm dia

G.I. Union 15 mm nominal bore

G.I. Union 20 mm nominal bore

G.I. Union 25 mm nominal bore

G.I. Union 32 mm nominal bore

G.I. Union 40 mm nominal bore

R.C.C. pipes NP2 class 100 mm dia

R.C.C.pipes NP2 class 150 mm dia

R.C.C. pipes NP2 class 300 mm dia

R.C.C. pipes NP2 class 450 mm dia

R.C.C. pipes NP2 class 500 mm dia

R.C.C. pipes NP2 class 600 mm dia

R.C.C. pipes NP2 class 700 mm dia

R.C.C. pipes NP2 class 800 mm dia

R.C.C. pipes NP2 class 900 mm dia

R.C.C. pipes NP2 class 1000 mm dia

R.C.C. pipes NP2 class 1200 mm dia

R.C.C. collars NP2 class 450 mm dia

R.C.C. collars NP2 class 600 mm dia

R.C.C. Colllars NP2 class 800 mm dia

R.C.C. collars NP2 class 900 mm dia

R.C.C. collars NP2 class 1000 mm dia

R.C.C. collars NP2 class 1200 mm dia

RCC pipe 450 mm dia NP -3 spigot

RCC pipe 600 mm dia NP- 3 spigot

RCC pipe 900 mm dia NP - 3 spigot

RCC pipe 1000 mm dia NP -3 spigot

RCC pipe 1200 mm dia NP - 3 spigot

RCC pipe 900 mm dia NP- 4 spigot

RCC pipe 1000 mm dia NP- 4 spigot

RCC pipe 1200 mm dia NP- 4 spigot

stoneware pipes grade A (60 cm long) 100 mm dia

Stoneware pipes grade A (60 cm long ) 150 mm dia

Stoneware pipes grade A (60 cm long)230 mm dia

Vitreous china India type w.c. pan size 580 mm

Vitreous China orrisa type w.c. pan size 580 mm

Bolts and nuts 16 mm dia 60 mm long

White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting pan or European type water closet as per manufacture's specifications

Brass cupboard lock 6 levers of approved quality, 40 mm size

Brass hanging type door stopper 150 mm

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

6 mm thick High performance glass

GI Screws of guage 10, length 45 mm for fixing cement fibre board to C Section

Solvent

Galvanised steel corrugated sheets

Primer (for gypsum board)

Frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm)

Rolling shutters of 80x0.90 mm laths

Coloured Orissa pattern W.C. pan 580x440 mm

Coloured Pedestal type W.C. pan 580x440 mm (European type)

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

C.I. grating 150 mm dia, weighing not less than 440 gm

uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia

uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia

uPVC coupler for uPVC drainage pipes 110 mm

Melamine polish

30 mm thick prelaminated flush door shutter

Binding wire

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Anodising 25 microns on aluminium sections

Powder coating 50 microns on aluminium sections

Wedge expansion hold fastener 3/8 or 10 mm

PTMT - Ball Cock 40 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 100 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 150 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 200 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 250 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 300 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 350 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 400 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 450 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 500 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 600 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 700 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 750 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 800 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 900 mm dia

Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 1000 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 500 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 600 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia

Screwed double flanged centrifugally cast (spun) C.I Pipe pf Class B confroming to I.S. 1536.- 100 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536 - 200 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 500 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S.8329 - 100 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 150 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 200 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 250 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 300 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 350 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 400 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 450 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 500 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 600 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 700 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 800 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 900 mm dia

Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 1000 mm dia

PVC blind pipe 150 mm dia as per IS: 12818

Water supply tanker of 5000 litre capacity

Turpentine oil

Coloured inter locking C.C. paver Block

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc.

Matt finished vitrified tile 100x100 x16 mm

Vitrified tile

Adhesive chemical

Acrylic Polymer chemical for cracks

PVC pipe - 20 mm -150 mm long

Bitumen primer for bitumen membrane

Stainless steel butt hinges 125x64x1.9 mm IS: 12817 marked

Acrylic exterior paint

Metal Primer (U.G.)

Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia

Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia

Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia

Autoclaved aerated cement (AAC) blocks

UV stabilised 2 mm thick plain FRP sheet

Stainless steel roller for sliding arrangement in racks/cupboards/cabinets shutter

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Carriage

Sundries

Coarse sand

Stone aggregate 40 mm nominal size and above

Tar bitumen

Gravel 40 mm dn

P.V.C. pipe 75mm dia 4kg pressure

Bricks

stone ware pipe 150mm dia

steel

steel TME FE 500

shuttering(centaring)

sismopactor

rubble

through stone

p.v.c.pipe 110 mm dia 4kg

nail iron all size

corner stone 38*20*30

coloured cement (pigment)

R.C.C.pipe 800 mm dia Np32.5 m long with coller IRC

Mosquito Proof Nylon Net

texture material

wagon drill

Guiniting Gun

Calcet Powder

Black Oxide Powder

Gypsum Powder

Synthetic Paint ( Redy mix )

French Polish

Hum Prope

Water jet with accessories

CPCV PIPE 40MM DIA.

Bleaching powder

potassium permanganate

nylon/pvc gasket

duster

plastic bucket

gunny cloth

kharata

cpcv pipe 50mm dia

cpcv pipe 15 mm dia

cpcv pipe 20 mm dia

cpcv pipe 25 mm dia

cpcv pipe 32 mm dia

Chain and pully

R.C.C. chamber cover with frame 90*45 cm hevy duty 225 kg

R.c.c. chamber cover with frame 90*45 cm medium duty 140 kg

brick II CLASS

Half round earthware pipe 100 mm (60 cm long)

plumber with tools skilled

C.I. cover with frame (gully trap)

salt glazed stone ware gully trap (150*150mm)

aggregate 40 mm (hand broken) blasted

stone ware pipe 100 mm dia

span yarn

stone ware pipe 225 mm dia

R.C.C. pipe Np2 class 100 mm dia. 2m long

R.C.C. pipe Np2 class 150mm dia. 2m long

R.C.C. pipe Np2 class 225 mm dia. 2m long

R.C.C. pipe Np2 class 300 mm dia. 2m long

C.I.Man hole cover 75 kg

R.C.C. Chamber cover with frame 60cm*45cm Medium duty140 kg

C.C.Septic tank 0.9 dia(2.5m long)

polydee-TP42 Primer

AG10 granules

polydee-LM

Polydee-MC

POLYDEE

Rough Shahabad 50 to 60 mm thick

rough shahabad 25 to 30 mm thick

pvc 160mm dia. pipe 2 meter long

Acrylic Polymer Modified waterproofing powder

bitumen 85/25 grade

grit (add below 5.6)

cement morter

bitumen felt

Glass Plain 3 mm

Jungle Wood ( Non teak ) normal

Jali Welded Mesh 50*25 11 Guage

Clamp for G.I.pipe 25 mm

Clamp for G.I. pipe

G.I.pipe 100 mm Dia. medium type

Clamp for G.I. pipe 100 mm

G.I. pipe 100 mm dia. heavy type

PVC Nahani Trap 75 mm

PVC nahani Trap 150 mm

Black Bakelite seat to european closer

PVC pipe 32 mm dia. 10 Kg. pressure ( Class 4 )

Half turn flush cock 25 mm

Colour european type W.C.pan

Low level flush pr. st. 10 ltr.

Anglo Indian W.C. Pan White

Fibre flushing tank for W.C.

P.V.C. Cowl 100 mm

Sand- Crushed

Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap

Ultra 250 mm. dia. uPVC cover & frame

uPVC Blanking Plug 110 mm

uPVC 90 degree bend

Rubber lubricant

Ultra shaft 250x470 mm

Ultra 450 mm dia. polypropylene multiple inlet inspection chamber base

Shaft pipe 450mm dia. 460mm height of HDPE material

RCC cover & frame 175 Kg.

uPVC Blanking plug 160 mm

uPVC Insitu Adapter 100 mm ( F )

uPVC Eccentric reducer 200 x 160 mm

uPVC Eccentric reducer 250 x 160 mm

uPVC Eccentric reducer 315 x 200 mm

Ultra 600 mm dia.polypropylene 315 mm St. through, 600 mm inbuilt shaft chamber

Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes

G.I. Screw 75 mm

socket brass for 32mm tap

chromium plated 12 mm dia. bib cock

lead pipe 32 mm dia.

bottle track chromium plated 32 mm dai

stainless steel sink of size 600*510*200 mm of nirali or equivalent make

Alluminium Screw 32*6 mm

Alluminium Screw 25*6 mm

P.V.C. Gasket for Glass

Socket for 15 mm tap

C.P.2-way bib cock jaquar make continental (cat. No. CON-041)

C.I bend 100 dia

purlin

soft murum

ghana teak wood

glass plain 5mm

welder

water

12 mm flexble inlet pipe connection

fiber flushing tank for w.c

G.I screw 40 mm

G.I clamp 12 mm to 32mm

C.I pipe 20 mm dia soil heavy type

C.I pipe 15 mm dia soil heavy type

C.I pipe 100 mm dia soil heavy type

half turn flush cock 25 mm dia

towel rod with clamp 16 mm dia

P.V.C pipe 15 mm dia 10 kg pressure (class iv)

P.V.C pipe 32 mm dia 10 kg pressure (class iv)

P.V.C pipe 40 mm dia 10 kg pressure (class iv)

P.V.C pipe 50 mm dia 10 kg pressure (class iv)

both side polished kadappa stone 25 mm dia

nut bolt 16 mm dia/nail/all size

formica 1.5 mm thick

all frame rail angle anodized

bitumen pad 25 mm thick 1.20*1.20

hold fast iron 300*40*5 mm

C.P. Bib cock long thread jaquar make continental(cat.no. CON-039)

Socket for 25mm tap

fibre glass mesh

pile boaring machinary 325 to 400 mm dia

A.C. block of size 625*240*225

jointing mortar of fix block

skilled labour

C.I.Bend 100mm dia

low level flush pr. st. 10 ltr

European type wall-hung white closet

push valve 32mm size of jaquar make

Neeru/ Shanala

p.v.c. pipe 20 mm dia. 10kg pressure(class IV)

P.V.C. 110MM rain water pipe 6kg pressure

ovel type under counter wash hand basin of 16 inch *22 inch size

telephonic black / coloured granite of 18 mm thick stone

kadappa frame work

chromium plated coupling bottle trap using CERA company model no 3448

G.I. screw 50mm

alluminium section

stainless steel plate

acrylic polymer modifield liquid

POLYDEE-TP40 PRIMER

POLYDEE-LM 150MM WIDTH

BITUFLEX CLOESDCELL FOAM 30*30 MM

pin header (standard size)

khandakies

ecolite of size 625*240*225

hollow block cc 0.1*0.2*0.4

hollow block cc (0.2*0.2*0.4)(0.3*0.2*0.15)

wooden slipper test (5*0.20*0.10)(5*5*0.1)

polydee 11

luster paint (m)

malathion

pine oil

clorophyriphos

lightening conductor(earthing)

gelatin 80 percent

electric detonator @1 detonator for 1/2 gelatin stick of 125 gms

credit for excavated rock found suitable for use @ 50 percent quantity blasted

Lock for sliding shutter

All Bearing Roller

Powder Coating

All Frame Rail Angle

STRUCTURAL STEEL

oil enamel paint

teak wood battens 50*25 mm

welding electrodes

tower bolt aluminium 200mm

handal stainless steel 100 mm

hinge stainless steel 125 mm

tower bolt stainless steel

steel primer

cold rolled door frame1829*610

air hose

bushes of tur/cotton

vertical post 100 mm dia

100 mm dia balli for rafter

sand blast gun nozzel

RCC pole

Engraver

karva (for roof and sides)

tatti

bamboo mating

guard stone

sand blasting without royalty

use rate of water hose 20 m

admixtures @200ml bag of cement(1594 X0.20)/50=6.376 lit

guiniting equipment

pump set (5 to 9 Hp)

crew for guiniting

use rate of spining belt

spining machine

energy charges for spining machine

total station (cost including GST)

steel tape (Cost in GST)

G.C.I sheet corrugated 24 BWC

G.I J and L hooks 6 mm dia

G.I. Washer

Zinc Sheet

A.C. Corrugated Sheet 6 mm Thick

Utima Tiles

Hanger wire (2.68 mm Dia.,1.8288 m Long)

Bioguard Tegular False Ceiling Tiles (600x600x15)

Optra Edge Tiles

Dune Edge Tiles

Fine Fissured Edge Tiles

T.W. Balli 100 mm Dia.

Polishman II class Semi skilled

Plain A.C. sheet 4 mm Thick

Alluminium Grill / Jali of heavy Type 100 x100 mm

F Patti

Terpentine

All frame rail angle with powder coating

Nylon / PVC Gasket

level Adjustment clip size 85 x 35 x 0.8 mm

Proflex Sheet 0.85 mm BMT imported Galvalume 350 mpa, A2 150 with alloy coating ,painting ,polister, top coat 25 micron and bottom coat of 12 micron

Sky Light 0.2 Millimeter thick polycarbonate sheet of size 2' x7' (5 x0.60x2.13)/ 674 sqm

Turbo Ventilator 24'' Dia. to be installed

Mazdoor Heavy Skilled

pannel roofing, fabrication, auto seaming and installation

Bituman pressure distributor @ 1750 sqm per hr

hydraulic self propelled drip @1500 sqm per hr for 4500m x 259m = 9000 Sqm

finish rolling with 6-8 tones smooth wheeled tandem roller

NTW for Frame

T.W. Planked 12 mm

N.T.W. Planked 12 m

N.T. Wooden Battern

Laches 250 mm

wooden fram

country tiles

Tile Turner

hanger rod 4 mm thick

UPVC Ridge / hip Tiles

UPVC 3 Layer Trapazoidal 2.00 mm sheet

Alluminium Sheeting sheet with encapsulated type reflective sheeting including 2 % towards lettering ,cost of angle iron ,cost of drilling holes, nuts bolts etc and signs an applicable

Nut Bolt Washers 12 mm Dia.45 mm long

Iron washer 12 mm to 16 mm

Jali chicken mesh

Wire glass 6 mm Thick

Bitumen NG 30 Tin (60/70)

Fire wood

Tarat 36'' Width (Gummy Cloth)

G.I. Clamps 80 mm

decorative board of plaster of paris

Practical board B.W.P. Phinol Bend 12 mm Thick

Manglore pattern cowl vantilator

Manglore glass tiles

A.C. Sheet Rigde

aldrop

aluminium stay 25cm

mild steel

G.I.screw 25 mm

aluminium sheet 24 B.W.G.

rubber lining

hydraulic floor spring

locking arrangement

BAMBOO

BIDDING

spinning machine crew

fuel charges for spinning machine

coles mobile aneas

Earth

ledges 4cm thick

NTW for sill

T.W. particle board with laminated face

C.P. sink cock

pvc pipe 160 mm

face tone

p.v.c. water stopper 310 mm wide

G.I.sheet 24 gauge

shalitex sealing compound

shalitex super expansion pad 12mm thick,27.5cm wide

nylon rope

asphalf

sinc base oil paint

M.S. PICKAXE

EMPTY CEMENT BAG

DUNGRI CLOTH

wooden pegs

resin sunpoxy

drill rod rate use 1.6 m length

explosive small dia

electric detonator

detonating fuse coil

welding holder

grinding machine

fixed charge of welding transformer

elbows,nipple, plug

vulcnizing materil

hydrolic self propelled chip sprider @ 1500sqm/hour

bitumin pressure distributor

Bitumen pressure distributor

MARBLE CHIPS

Coarse Sand as per IS:[email protected] cum/cum of Concrere

Kerb casting machine @60 metres/hour

Concrete Batching and mixing plant @15 cum/hr.

Coarse sand 30 per cent

air compressor 280 cm

jack hammer

electrician/linemen

geletin 80 percent

Concrete cement tank

Material cost Rs 1/- per unit.

FRP door shutter 30mm tk factory made shutter

FRP door shutter 35mm tk factory made shutter

Aggregate 90mm to 45mm

Boulder of size 300mm

Quarry stone 150-200mm size

Jali welded mesh

NP2 pipe 450mm dia 2.5m long

NP2 PIPE COLLAR OF 450MM DIA

Aggregate 90mm to 45mm

RCC/PVC tank of size (0.9X1.2)m OD

RCC/PVC tank (0.75X0.90)M.OD

80mm Laterite stone metal

60mm Laterite stone metal

Laterite stone

Ordinary Detonators

Electric Detonators

Jack hammer for drilling with compressor

Blaster

Crowbarman

8 to 10 MT power roller for 100mm loose metal

8 to 10 MT power roller for 200mm Loose Metal

8 to 10 MT Vibratory roller for 100mm Loose metal

8 to 10 MT Vibratory Roller for 200mm Loose metal

Hire charges for boring machine

Hire charges of "V" notch for yield test

In well bore machine hire charges

P.V.C. pipe 140mm dia. (4 Kg/Cm2)

Permissible Machinery for Farm Pond

Door stopper (Stainless steel)

Vision panel

Eye hole lens

White glazed wash hand basin (55X50)cm

P.V.C Connector15mm dia

Handle stainless steel (100mm)

S.S sliding door bolt 250

Powder & Chemicals for colour anodizing process of aluminium section

Country teak wood

C.I. Nahani trap

Bib cock stop tap brass heavy 20mm

Socket for 20 mm tap

Wheel stop tap brass 25 mm

Eco- drain 110 mm SN 8 NU - drain UPVC pipes

Steel centering for foundation. (Per Cum of concrete)

Steel centering for columns/Pillars (Per Cum of concrete)

Steel shuttering for Lintels, Beams, Girder, Plinth beam, Cantilever. (Per Cum of concrete)

Steel shuttering for Roof, landing, balcony having 12.5cm Tk (Per cum of concrete)

Electric vibrator

Single Toilet unit

Vitrified tile (Matt finish). Size 590 to 605mm X 590 to 605mm X 8 to 10mm.

Tile cutting machine

PVC pipe 160mm dia (Rain water pipe)

Water tank H.D.P. container syntex or alike

Jaali fly proof

Stop tap brass with crunch wheel 15mm dia.

Piller tap 12mm dia. chromium plated heavy

Power roller for 80mm Laterite metal.

Power roller for 60mm Laterite metal.

Brick work in C.M 1:5 mix including all labour charges etc complete

The Total value of Schedule4

Sai Bulding Materils And Suppilres Arni

GUNWANT L RAUT