GE 874/EWS-43/2021-22

Amount

E/M Portion

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M & L for point wiring for One light /one fan/one bell point controlled by one switch with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping or conduit pipes, with wooded or white coloured casing caping (as directed and specified) including accessories and provinsing of PVC boxes for mounting switches, switch socket, fan regulator, provn of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly. Make of wire :-Havells/ Finolex/L&T. Make of casing caping- Poly plast/ pressfit/ Presto plast

All as per item no. 2 above but for One socket outlet 5 pins 5 amps controlled by one switch on same board, complete as directed by engineer in charge.

All as per item no. 3 above but for One socket outlet 5 pins 5 amps controlled by one switch on independent board complete as directed by engineer in charge.

All as per item No 4 here in before but wiring with 4.0 sqmm copper wire FRLS and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .

S&F switch piano flush button single pole, one way 5 amps complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells .

S & F switch socket combination 5 in one, 5 pin 16A, flush type, universal complete as directed and specified by engineer in charge. Make : Anchor/SSK/Cona Havells.

S&F socket outlet multi 5 pins 5 amp, complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate (back plate of wooden or white pattern) suitable for batten/wall fitting of wooden pattern or white, complete as directed and specified by engineer in charge.. Make - Anchor/SSK/Cona Havells

Supply and Fixing LED bulb 9 watt complete as directed and specified by engineer in charge. Make : Make Bajaj/ Havells/ Wipro.

S&F LED Bulk Head luminaires, with 9 Watts /10 Watt lights and LED light driver holder and with lamp holders, ceiling rose, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make of light fitting - C&S, Philips, Syska, Wipro or equivalent as approved by engineer in charge.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link complete all as specified.

Supply & fix sheet metal enclosure MCB distribution board. Triple pole & neutral (VTPN) 240 volts 4 way with space for MCCB and MCB IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and directed

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core complete all as specified and directed

Supply & Fixing of Electronic Voltage Stabilizer of 6.6 KVA, 30 Amp, working range 110-290 Volts, Model No VGMW 1000 Plus all as specified and directed by Engineer-in-Charge

Supply and fixing Voltage Protector Single phase complete all as specified.

Supply and fixing MCCB 4 pole, 415 volts with adjustable thermal and fixed magnetic setting, 63 Amp with breaking capacity 16 KA complete all as specified and directed.

Supply and fixing of Electric water heater storage type of capacity 25 ltrs all as specified and directed by Engr in Charge , Make - Havells , Monza DX HSN Code 8516 or equivelent ISI Marked company.

M&L for LED Batten 1x20 W for regal batten for LED Universal battenm for G13 with 18 W rods and ultra bright LED Polycarbonate tube light very high effiency suited for instalation in existing T8 and connecting electrically using PVC insulated and overall sheated flexible copper conducter cable of size 0.75 sqm 3 core all as required at site or directed by engr - in- charge. Make : Havells Batten Cap part No LHFYBYG21N1W020 and LED Tube Rod Cat part LHLDCLXNUL8X018 or Equivalent.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

M & L for sub main wiring with two single core 10 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

Supply and Intsallation of Centralised Water Heater Facility with water heating plant of 500 LPH, capable of heating 500 litres of water at 2 degrees celcius to 50 degrees celcius in 40 minutes (or 65 degrees, as required at site. But when 65 degrees celcius is required, then time may be more for heating), with puffed glass wool/ polyurethene insulation (of thickness and density as directed at site by engineer in charge) over the boiler, boiler tank and pipelines, all covered with aluminium cover, digital temperature controller, electronically controlled burner, water temperature gauge, nylon braided fuel pipes, flue gas chimney and exhausts (insulated with POP ropes), fuel boiler, fuel level indicator, fuel burner, capable of running in Kerosene and Diesel, boards (for instructions, caution and installation names), necessary electrical wiring, necessary insulated GI/ Triple layered PPR (Grade PN-20) gate valves, insulated GI/ Triple layered PPR (Grade PN-20) fittings and insulated GI (medium grade)/ Triple layered PPR (Grade PN-20) pipes (existing tank to boiler, and an output of 6m from the boiler) including polyurethene (covered with aluminium sheet and nylon cable ties) lagging as directed at site by engineer in charge, one set of beacons (to indicate plant running) and ....

...including a control panel with over current, over voltage protection circuits, Ampere meter, Voltage meter, power factor meter, all with 24 month AMC (all included warranty), suitable motor pump of head of 20m to pump water to storage tank is included. Fuel tank of 150 litres capacity is also included. Any other necessary fittings, accessories and infrastructure required shall also be provided, as directed by engineer in charge. The make shall be of Supertherm or equivalent as approved by engineer in charge. The equipment shall have tolerence for any soil/ dirt/ water in fuel as applicable in field conditions in Army locations in Kashmir valley. In case of any doubt regarding electrical and plumbing requirement, the direction of engineer in charge will be final. Staging for tanks mentioned below are also included.

Material, Hoisting, Fixing and Labour for Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal or cylindrical as approved by Engineer In Charge) vertical with closed top, for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position all as specified.

Material, Hoisting, Fixing and Labour for Rotational moulded polyethylene Fuel storage tank of capacity of 250 litres (cylindrical vertical with closed top), to be used as storage tank for fuel, for hoisting into position either inside or outside of building, connecting up pipes, marked with type of Fuel used in white paint (as described at site), securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position all as specified.

Supply and Fixing GI Steel Tubes, 'medium grade', galvanised, 20mm bore with all fittings (such as tees, elbows, sockets, unions, etc) laid in trenches (including excavation and refilling of of 60 cm below the ground level/ fixed to wall (including lagging for exposed regions)

Supply only of PPR (triple layered with PN-20 strength) Tubes, with one socket per length of pipe for 20mm bore pipe.

Supply and fixing analogue/ digital temperature gauge (for measurement of temperature in water tank), IP67 rated, rainproof and snowproof, with separate sensor and gauge fixed upto 1.5 meters away

Material and Labour for Plain Cement Concrete in Foundation, of type B2, 1:2:4, 40 mm graded aggregate, laid in foudations or as directed.

Supply and Fixing, Single Phase, electric motor water pump, with separate starter, self priming type, with 25 meter head, 0.5 HP (or any other higher capacity as required at site), for pumping hot water, complete with all plumbing and electrical fittings, all as clarified, specified and directed by engineer in charge. Make : Kirloskar, Crompton Greaves, Crompton or equivalent from the list of approved brands in MES.

Supply and install auto switch on and Switch off mechanism for above motor pump (based on sensors in upper tank and lower tank), IP67 rated, with all necessary electrical, electronic and mechanical fittings, complete, all as clarified, specified and defined by engineer in charge. The controller shall have system to protect motor when lower tank is dry and correspondingly avoid dry running of motor.

Material and Labour in Walling of random rubble stone masonry, uncoursed, built in cement mortar of 1:4 ratio, well bonded, in stagings, retaining walls, abutments and similar work.

Material and Labour for Galvanised, corrugated mild steel sheeting, of thickness 0.8mm, with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as in roof covering/ wall covering, fixed with self tapping screws as specified.

Material amd Labour for Plain, galvanised, mild steel sheeting, with grade of zinc coating 275, of thickness of 1 mm, including washers, joints, etc,., as in roof covering/ wall covering, fixed with self tapping screws as specified

Material and Labour Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (of any colour and pattern as specified at site) having tensile strength of 550 Mpa as in roof covering/ wall covering, fixed with self tapping screws as specified

Material and Labour Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (of any colour and pattern as specified at site) having tensile strength of 550 Mpa as in roof covering/ wall covering, fixed with self tapping screws as specified

Material and Labour Framed work such as tank stagings, shed superstructures, grills, gratings, etc.. with ends of tubular bars shouldered and/or riveted, or bolted, or welded, or forged for shed building, conforming to Fe.290.Gde-E-165, painted in Olive Green/ MES Blue Colour.

Material and Labour for tank/ pipe insulation with resin bonded fibre glass wool roll/ Polyurethene roll of density of 24 kg per Cubic Meters, of 50 mm thick, with factory laminated aluminium vapour barrier and aluminium sheet covering, thickness of insulation as specified and including the following:- (a) Material and labour for cleaning the tank surface (to be insulated ) by scrapping carefully with wire brush, any paint, etc. to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all parts of tank are sealed and covered. (b) Material and labour for applying rubber based adhesive CPRX compound. (c) Material and Labour for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leakproof. (d) Material and Labour for securing the insulation with and including mechanically fastened nylon/ steel straps of size 12 mm/50 mm at maximum intervals of 1.2 mtr.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

FG CONSTRUCTION

M/S MANZOORAHMAD LONE

M/S GHULAM NABI KHUROO AND CO

POPULARHARDWARESTORE

M/S Mohammad Saleem and Co

Bidder Name

M/S ABDUL AHAD SHAH

M/S GHULAM NABI KHUROO AND CO

FG CONSTRUCTION

POPULARHARDWARESTORE

M/S MANZOORAHMAD LONE

M/S Mohammad Saleem and Co