Beautification of Roads in Sec-13 and 17 in ward no. 1 under MC Panipat (Rural)

Amount

`S/E of Solar Based Blinker system with 12V compressed panel for 4 day Backup unit make Tata BP/CEL/JJ with sealed battery EP Exide Power Safe 12V with BEL/SIEMENS/SAFETRANS/ETL/CEL make Charger and LED Aspect, Safetrans Blinker card RED/AMBER colour 300mm dia (EN certified) with Heavy duty Battery box with Locking Arrangements, Solar panel adjustable stand with 4” dia standard 20fet pole including erection of pole and painting with hi-Gloss Traffic Yellow paint and as per EN 12369 IRC/MOST Specification a reflective Frame erected both front sides of LED Aspects (White Reflecting Base ) etc complete with all respect Aspect Specification:- RED/Amber Led,s Signal Aspect Led’s Viewing angle -23deg. Led,s Forward current-20ma Total no of Led’s -190no. Total consumption -4W max. Intensity of Led aspect-260cd minimum IP-65 Approved, TUV Latest amended design Qualification testing ? Moisture resistant- NEMA STD 250 Type 4-1991 ? Electronic noise -FCC Title 47sec 15Sub.B ? Transient Voltage Protection -ITE VTCSH-STD Part-2 ? Controller Compatibility - NEMA TS-2-1992 QUALITY ASSURENCE Strict Quality control procedure as per international standards are followed right from incoming material to final products and as per IRC/TEC direction and EN6 ILPS of the ITE Part 2 J-98 section 3-4-5,With 3 year free maintenance.`

Recovery old unserviceable poles of 9 mtr

Providing and fixing 200mm Dia and One mtr Long Red Sand Stone Pedstal dully fixed at site complete all respect (NS) (6000 plus 18%)1.10

Cost of engraving of matter and desired design on Red Sand Stone (NS) (5400x18%)1.10

`Supply and Erection of Intelligent Adaptive APP Based Traffic Management System. Equipped with New tec- 520 next generation technologies With following Features. • Related to SMD based Technology Traffic Control systems) • POLICE CONTROL APP WITH FREE NETWORK • NEED NO INTERNET/NETWORK FOR OPERATION. • WORKING IN 1200 MTR RANGE. • Working on User Friendly IDEA PAD (Transforming Page). • GREEN WAVE CORRIDOR ACTIVATION • OPERATION WITHOUT SERVER APPLICATION. • USER FRIENDLY SAFETRANS APPLICATIONS. • FAULT RECORD ONLINE CHECK • GLOBAL HARWARE SETTING • ACTUATION SETTING ONLINE /OFFLINE THROUGH ANDRIOD BASED ON NEW ADCL COMPACT TRAFFIC TECHNOLOGY Compact Next Generation ITS Hardware and User friendly GPRS enabled Systems, Advance Voltage Control with software based systems including three phase power Cross detections/spikes proof systems. Pre-timed, Vehicle Actuated, ATCS, Manual Control, Hurry Call, Cable less linking and Flash modes of operation. 1) Built-in central control software for ITS system to ensure work stability; 2) 2*48 work periods for workday and holiday setting; 3) Easy for maintenance and function extension by modular design; 4) Input AC220V, 5) Yellow flashing or power off at night can be set; 6) Adopt RS-232 or LAN port to communicate with upper computer; 7) 32 working menus used for any period among 1~30 numbers customs can set it by choice); 8) The flashing state, frequency and time of each green signal light can be set or adjusted; 9) It can modify the current pace of running time in the running state immediately; 10) Full red, yellow flashing, step by step manual jump in the manual remote manual function optional); 11) Be equipped with the hardware fault testing function (Red Light fails, Green lights up test), down grade to Yellow flash status and cut down the Red and Green light power supply when the fault happens. (Optional) 12) The output part adopts zero-test technology Change of state is under zero state switch in communication Make the drive more safe and reliable; 13) Each output all the way with independent lightning protection circuit; 14) Equipped with Installation testing capabilities and it can be used to test if each light is correctly installed. 15) 30 menus can be used for backup and recovery; 16) The setup software can operated offline Project data can be stored on the computer Also working with Android working APP Green Wave traffic signal technology. Special menu:- detector failure menu, Amber Flashing menu, total fault detection menu enable with DIP setup functions. Makes:- Safetrans ITS / SIEMENS /Swarco/ Bel/Keltron Note: - NO PLC Based System or Web Enabled/Internet Accepted.

Supply and erection of Antitheft Cabinet with heavy duty M.S Sheet without any Hinges with Internal locking bolts Without door ,but lockable roof with nut bolt including base frame made with heavy duty angle stand suitable for Battery Bank and Charge Controller complete in all respect

`Supply and Erection of LED aspects as per Following specifications and Standards:- Polycarbonate signal aspects of impact resistance, UV stabilized, Fast dyed, Unbreakable, rust and rain proof and anticorrosive, no metallic components parts used single walled including aluminum basket for led,s retrofit kit with brass nb, texture non reflective from surface ,hdpe detachable sun visors and LED’s based lamp from giving balanced light output intensity with tolerable limit and with appropriate colors and necessary mounting arrangements. QUALITY ASSURENCE TUV Certified , IP65 tested approved ,EN/BIS Certified Makes Safetrans/Swarco/Siemens/BEL/CEL` `a) RED/Amber Led,s Signal Aspect 12 Led’s Viewing angle -23deg. Led,s Forward current-20ma Total no of Led’s -190no. Total consumption -10W max. Intensity of Led aspect-260cd minimum Energy consumpution upto 8.5 watt

`Supply and Erection of LED aspects as per Following specifications and Standards:- Polycarbonate signal aspects of impact resistance, UV stabilized, Fast dyed, Unbreakable, rust and rain proof and anticorrosive, no metallic components parts used single walled including aluminum basket for led,s retrofit kit with brass nb, texture non reflective from surface ,hdpe detachable sun visors and LED’s based lamp from giving balanced light output intensity with tolerable limit and with appropriate colors and necessary mounting arrangements. QUALITY ASSURENCE TUV Certified , IP65 tested approved ,EN/BIS Certified Makes Safetrans/Swarco/Siemens/BEL/CEL` `b. RED Standing Man pedestrian signal ,s Signal Aspect 12 Led’s Viewing angle -23deg. Led,s Forward current-20ma Total no of Led’s -66 no. Total consumption -10W max. Intensity of Led aspect-260cd minimum Energy consumpution upto 8.5 watt

`Supply and Erection of LED aspects as per Following specifications and Standards:- Polycarbonate signal aspects of impact resistance, UV stabilized, Fast dyed, Unbreakable, rust and rain proof and anticorrosive, no metallic components parts used single walled including aluminum basket for led,s retrofit kit with brass nb, texture non reflective from surface ,hdpe detachable sun visors and LED’s based lamp from giving balanced light output intensity with tolerable limit and with appropriate colors and necessary mounting arrangements. QUALITY ASSURENCE TUV Certified , IP65 tested approved ,EN/BIS Certified Makes Safetrans/Swarco/Siemens/BEL/CEL` `c. Green Colour LEDs Signal Aspect Led’s Viewing angle -23deg. Led,s Forward current-10ma Total no of Led’s -66no. Total consumption -4W max. Intensity of Led aspect-260cd minimum Energy consumption up to 6 watt.

`Supply and Erection of LED aspects as per Following specifications and Standards:- Polycarbonate signal aspects of impact resistance, UV stabilized, Fast dyed, Unbreakable, rust and rain proof and anticorrosive, no metallic components parts used single walled including aluminum basket for led,s retrofit kit with brass nb, texture non reflective from surface ,hdpe detachable sun visors and LED’s based lamp from giving balanced light output intensity with tolerable limit and with appropriate colors and necessary mounting arrangements. QUALITY ASSURENCE TUV Certified , IP65 tested approved ,EN/BIS Certified Makes Safetrans/Swarco/Siemens/BEL/CEL` `d. Green Pedestrian running Man Colour LEDs Signal Aspect Led’s Viewing angle -23deg. Led,s Forward current-10ma Total no of Led’s -56no. Total consumption -4W max. Intensity of Led aspect-260cd minimum Energy consumption up to 6 watt.

`Cantilever poles: - This signal post consists of 3 sections 6”5”2” dia made from mild steel B class pipes .The tubes are joined by tempering outer tube signal post is capable of Holding vehicular as well as pedestal faces the overhang assembly is provided for minimum clearance of pole from G/L Total height of Pole varies from 8.3 mtr. Pole is further Divided in two sections and is joined With the help of flanges for easy transportation including required RCC in Foundation. size of Cantilever bracket upto 15 feet long and one segment section in half of Bracket Designed as per International Traffic rules and Standards.)

Supply of Turner type Black sheathed PP 14core control cable 1mm copper Polypropylene super cable with full sheathed as per site requirement `A. 14 Core 1mm

Supply of Turner type Black sheathed PP 14core control cable 1mm copper Polypropylene super cable with full sheathed as per site requirement `B. 4 core 1mm

Aspect holding Stands (Arms):-Aspect stands suitable for moving of aspects L/R and S/F position according Traffic waves. The aspect stand made with Strips duly auto tight clamps complete with all respects

`Power Source:-Supply and erection of Traffic Signal Controller power Backup SYTEMS Input: -160-280 a) Output: -230VAC plus 0.5 b) Charger:-Solar Charge Controller/SMPS based Charging System.0-20Amp c) Power source tech (EPG):- MPWMM, Efficiency-90% d) Technology: -MBT Makes (Convergence, Green dot, Pro/Eco-lite/) Complete in all respects

Supply and erection of Sintex make Junction Boxes complete with connectors, clamps, wiring Jacks etc complete in all respect

Supply and erection of Side walls made with ACP/pipe Frame with Black paint/polished as per IRC standards with HIP White base complete with Clamps including fitting for Aspects Modules (set of 2/4/5 attachemnets

Supply of Microprocessor based Jumbo Down Counter Time for ATC Signals to depict the timings of Red /Straight Green or Side Green timings independently. The down counters of approx size 22” x 20” fabricated from Reinforced Plastic with Ultra violet Diffuser display, Digital segments and having long hood and having 2.1/2 digits of 12” height and 8” width with Hi Bright 30 watt 240 Track SMD Light Bunch suitable to run with 12/24 20 Amp Supply system (make Safetrans ITS India/BEL/KELTRON

Supply and erection of 8 pole (twin Junction) Controller synchronized digital power wave out-put (5V operation programmed digital form) for better flow of traffic connected with App control device Systems for Command of Main Control Built PWM and auto Cut on High/low Voltage ,Heat protection suitable for fast command signal operation .completely suitable for 15 Channels ,working on 5.2 digital version without external Id automatically connected with Android device and Controller, auto disconnect Make/Safetrans/Siemens/Bels

`Supply and erection of Standard pole as per IRC recommended specifications and Standards as following:- This signal post made from mild steel B class pipes. The signal post is capable of holding vehicular as well as pedestal faces the overhang assembly is provided for minimum clearance of pole from G/L Total height of pole varies from 20 plus 10 30 feet long. the pole have superior approved make paint coatings and sockets and bends properly welded on pole including installation of pole with Proper CC Mixture cost of digging hole as recommended according to IRC specifications.

Supply and laying of HDPE pipe size 70 mm with manual trenchless system for cable protection

Supply, testing and commissioning of unique collection of functional and decorative poles packages for modern urban design achievement. Designed to harmonise both in style and proportion with the designated street light these poles add extra ambience to the surroundings. The luminaire poles shall be made of Mild Steel in 9 Meter height with double side bracket with street light of 120W each and with top diffuser(Tri color/ Amber color). Pole section of length 9mtr is 150x150mm square pipe with base plate of 300x300x12mm. Provision for inside termination box with 4way connector and 1nos 6 AMPS MCB for local isolation. All pole section shall be welded by certified welders using high and MIG welding process. Service door at bottom part of the pole is equipped with a C clamp with sliding nuts to accommodate a built-in connection box. The base plate of the pole shall be design with elongated foundation holes for fine alignment of the pole during installation. Pole primarily coated with epoxy resin and top coated with UV powder coat and cured. The street light fixture shall be made of corrosion resistant mild steel closed by diffuser with durable proper silicone rubber gasket for dust and water protection in 120W. Arm length of the light fixture is 750x150x150mm. Luminaire primarily coated with epoxy resin and top coated with UV stabilized PU powder coat. All exterior parts are made of stainless steel. Light output of source is more than 110lm/ watt, CRI)70, Surge protection 4k, operating voltage 140-270V. The streetlight automation system shall control and monitor streetlight electrical cabinets remotely via NB-IoT / 4G / 5G as the primary communications network to the server. The system shall be easily scalable to include streetlights from a small area to a citywide system essentially provide following facilities: Automatic, remote and manual switching options Remote energy measurement, Real-time system monitoring, Scheduled dimming of Street Light fixtures. Fitting is IP66, wired with Branded LEDs of Osram/ Cree/Seoul and Fulham/Meanwell/Inventronics/Osramor or equivalent constant voltage/current driver with THD ( 10%, Pf : ) 0.98. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. Fitting is complete in all aspects with all accessories except foundation bolt. with 5 year DLP Approved Make : Keselec/VAK/Jaquar Note: The pole would be inspected by the inspection committee of the MC Panipat and only after that technical inspection Pole will be finallised for eraction at site. Note: For better understanding of the design and specification photo has been attached for design and specification of the poles along with the tender docs.

Supply, testing and commissioning of Post Top Coloumn light made of mild steel and have ingress protection for optical compartment. Column of height 4mtr above ground level with two spot light of 10W for top illumination and column with predesigned Laser cut to illuminate the surroundings with noticeable mode. The column light pole section of 220mmx220mm x 4mm thickness up to 4mtr long. The base plate dimension are 209x209x16mm. All pole section Shall be welded by certified welders using high and MIG welding process. The Service door shall be provided at bottom part of the pole to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole is design with elongated foundation holes for fine alignment of the pole during installation. Nano Ceramic surface conversion, resistant to corrosive environment. Fitting is made of mild steel with fine laser cut design and signage closed by diffuser tailored with lighting to suit your specific needs as per detail drawing. Colour tolerance ,3 SCDM to avoid colour deviation. Nano Ceramic surface conversion, resistant to corrosive environment. All exterior parts are made of stainless steel. Diffused symmetric light without glare. Light output of source is more than 110lm/ watt, CRI)70, Surge protection 4k, operating voltage 140-270V, Branded LEDs of Osram/ Cree/Seoul and Fulham/Meanwell/Inventronics/Osramor equivalent constant voltage/current driver with THD ( 10% power factor)0.9. The CCT of led will be 3000k and fixture color will be Black as required by the project. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. Fitting is complete in all aspects with all accessories except foundation bolts.with 5 year DLP Approved Make : Keselec/VAK/Jaquar Note: The pole would be inspected by the inspection committee of the MC Panipat and only after that technical inspection Pole will be finallised for eraction at site. Note: For better understanding of the design and specification photo has been attached for design and specification of the poles along with the tender docs.

`Supply of PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS:1554 (PART-I) 1988/7098 (Part – I) WTH ALUMINIUM CONDUCTOR – ISI MARKED POWER CABLE- ALUMINIUM CONDUCTOR 25 Sqmm 4 core armoured cable Make: Grandlay/Havells/KEI/RR Keble/POLYCAB

`Supply of PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS:1554 (PART-I) 1988/7098 (Part – I) WTH ALUMINIUM CONDUCTOR – ISI MARKED POWER CABLE- ALUMINIUM CONDUCTOR 16 Sqmm 4 core armoured cable Make: Grandlay/Havells/KEI/RR Keble/POLYCAB` `Supply of PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS:1554 (PART-I) 1988/7098 (Part – I) WTH ALUMINIUM CONDUCTOR – ISI MARKED POWER CABLE- ALUMINIUM CONDUCTOR 16 Sqmm 4 core armoured cables Make: Grandlay/Havells/KEI/RR Keble/POLYCAB`

`SITC of DIN Type Astronomical Digital Time Switch with 1 CO: Astronomical programmable every 1 minute, backup of 6 years , 28 memory locations, currently capacity 16 Amp, with one changover, total 28 program

`P and F Contactor as per NS MNX 25 Make: Make: Indo Asian/L and T/C and S.

Supply of street light electric meter of 8 Kw capacity three phase and providing connection of street lights with the meter, payment to the contractor will be made as per actual slip received from the UHBVN .

Supply of street light electric meter of 4 Kw capacity three phase and providing connection of street lights with the meter, payment to the contractor will be made as per actual slip received from the UHBVN .

`Supply and eraction of PVC/XLPE Insulated (Heavy Duty) Electrical cables for working voltage upto and including 1100 Volt to IS: 1554 (Part-I) 1988/7098(Part-I) 1988 with coper conductor -ISI Marked 2.5 sq mm 2 Core copper Unarmoured Cable Make: Grandlay/Havells/KEI/RR Keble/POLYCAB

Providing and fixing of P6 Video wall with accessories (size 4.8x3.84 mtr) video wall controler VX1 AIO with USB Play Back alogwith power modules, internal cables and connectors, locking plate, ribbon, etc. (Waterproof) (Videos, images, Animation, Texts and Graphics) with Intelligent media player, Ethernet, inculding Transportaion, Installation, Commissioning and training on site with RCC foudation nutbolts, MS Structure frmae and Squre Piller (Unipol) (Height from goround 6mtr) ACP cladding on borders and squre for beautification, complete fixed at site including all charges. Megastar/ Samsung/ LG make as per specification complete in all respects

Providing and fixing pair of Stainless steel dustbins 50 litre volume each, of each set marked with two different colours tape, for dry and wet waste, made of stainless Steel to be mounted on SS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 SS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1 :2:4 cement concrete.

Provision for Retro Reflective Type 75MM wide tape (NS

Providing and fixing 200mm Dia and One mtr Long Red Sand Stone bollard dully fixed at site complete all respect

Construction of 6 mtr long Mild Steel Bus Queue Shelter with PU paint including signages, baklite sheet, polycarbonate sheet for roofing , foundation etc as per drawing and complete in all respect Bus Shelters. Specification: - SIZE -9Mtr X 2.4Mtr X 2.5 Mtr. 1. Providing and pasting at site high grade printed vinyl with bus shelter name logo, route number etc. on one sides of the front facia information board. The vinyl shall be minimum 85 micron thick, of LG or equivalent make complete in all respect and to the entire satisfaction of engineer-in-charge. 2. Supplying and fixing single sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 3.80 to 4.00kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with internal support frameat rear completely sealed with the of silicon and EPDM to make it dust and water proof should have the inbuilt strong clipping and frame arrangement for holding the flex or digital media along with all necessary cleats and corner Joinery required to build thus signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron. Signage should have inbuilt arrangement of mounting it with the bus shelter structure. 3.Supplying and fixing of double sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 5.3 to 5.5kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate on both side and reinforced with internal support frame,completely sealed with the help of silicon and EPDM to make it dust and water proof. Should have the inbuilt STRONG clipping and frame arrangement for holding the flex of digital media alongwith all necessary cleats and corner Joinery require to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron, signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weather proof protection. 4. Vandal resistant light source of polycarbonate body with compact fluorescent lamp of white colour of 55w of standard, MY 1: of approved make with IP 67 approval,including cable fixing, switch gear etc. all complete. 5. Providing and fixing MS Electrical weather proof leader box approximately 600mm wide and 900mm high as required for installing MCB switch gear and meters as required for advertisement and other electrical gear, with provision for inserting cable condails as per design. The access to feeder box shall be through a toll based (common for all locks provided in each package) key, Tools should not be identical for different package shelters. 6. Providing and fixing anodized aluminum 25 x 50mm channel frame with 40W standard manufactured tube light fittings with electronic choke starters and wiring all complete connection to electrical supply drom feeder box with minimum 4 tubelights x per square meter (of add panel size) or actual requirement decided by the engineer in charge. The tube light frame and fittings (including that in feeder pillar) should include ballast ELCB timer MCB mounting blocks etc. The tube light alignment should allow two way lighting (front and back) of add panel. 7. Providing and fixing various member of material shall be austenitic mild steel with PU paint complete in all respect and to the entire satisfaction of the Engineer in charge. 8. Providing and fixing 5-walled , 10mm thick polycarbonate multiwall sheet bronze colour having a light transmission of 37% with a Uvalue of 2.39 w/m2 K. Lexan thermoclear multiwall sheet LT2UV105R175 from SABIC innovative plastics or Equivalent. Fixing of the 10mm sheet to be done with profiles having EPDM / silicon. Aluminum profiles need to use and front and rear of polycarbonate sheet has to be closed by aluminum profile. Sq. mtr 19

Providing and fixing convex Mirror as per standard design having weight not less than 10 kg , Diameter 106 (cm) , Lens Material Polycarbonate , Viewing Angle 130 (degree) embedded in CC 1:2:4 of size 300mm x 300mm x 450mm having post height 1.5 mtr complete in all respect

Construction of Mushroom type Water Fountain, made out of Red Sand Stone including all operations complete fixed in running condition having 3 stages of cascade falls with 2400 mm overall height and 6000 mm water tank size as per Drawing and as per satisfaction of Engineer-in-charge.

Provision for pigment of required colour and approved make as per satisfaction of Engineer incharge

Providing and fixing One Statue of Army Bust partenet prepolished white makrana marble good quality Realistic Acrylic paint 10 year warrenty 750 mm height and 450 mm width, including all taxes and complete in all respect

Cost of engraving of matter and desired design on Red Sand Stone with 10 mm deep engraving as per direction of engineer in-charge

Cost of Monoment of ` Dandi March` F.R.P 8mm thick high quality fiber glass mixture of epoxy resin and aerosil powder with iron structute of 75 mm dia pipe, 2750 mm height of statues and 1500 mm width and 1067 mm high Pedstal including fixing at site complete in all respect commemorating the country`s struggle for independence under the leadership of Mahatma Gandhi. An ensemble of eleven statues, ten represent people from diverse sociocultural, religious and economic backgrounds following Gandhi in the lead. who include a woman with a sari draped over her head, a group of three men – a Hindu, a Sikh and a Muslim, a turbaned man, an emaciated man, a Christian priest, a woman and a young man urging a tired old man to join the group.

Cost of Monoment of Kargil Vijay Diwas F.R.P 8mm thick high quality fiber glass mixture of epoxy resin and aerosil powderwith iron structute of 75 mm dia pipe, 2750 mm height of statues and 1500 mm width and 1067 mm high Pedstal including fixing at site complete in all respect commemorating victory of kargil battle with hoisting of Indian Flag An ensemble of four soilders including one sikh soilder.

Cost of Monoment of ` Maharana Partap with Chetak` F.R.P 8mm thick high quality fiber glass mixture of epoxy resin and aerosil powder with iron structute of 75 mm dia pipe, 4573 mm height of statues and 1500 mm width and 1067 mm high Pedstal with iron including Pedstal and fixing at site complete in all respect

Provision for fixing of small lights and small fountains in the Pond area (NS) 12 lights and 12 fountains jet complete in all respect.

Providing and fixing of corded LED COVE light of make Phillips/ Havells/ Crompton complete in all respect.

Bidder Name

Amount

S S BUILDERS (GSTN-06ABOFS7053A1Z7) BID ID -1061227

Krishna Construction Co (GSTN-06AALFK6441Q1ZP) BID ID -1063574

Krishna Construction Co

Krishna Construction Co