PETTY REPAIR AND DAY TO DAY COMPREHENSIVE MAINTENANCE TO BANI CAMP, VSB AND TECH AREA AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD

Amount

Fixing only in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed by Engr-in-charge. Note:- Harrison rails shall be supplied by the department under Sch 'B'. Necessary fittings required for fixing the same shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Fixing only in repair towel rod/towel rail of any type, fixed with PVC rawl plug and stainless steel screws, complete all as specified and directed by Engr-in-charge. Note:- Tubular towel rail/Towel rod shall be supplied by department under Sch 'B'.

Fixing only in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-charge. Note:- Galvanised mild steel wire cloth shall be supplied by the department under Sch 'B'. Necessary fittings like screws etc. or any other way to fix shall be arranged by the contractor and rate for same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Fixing only in repairs Rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank and removing to store complete all as specified in SSR Part I complete all as specified and directed by Engr-in-charge. Note:- Water tank 500 litre shall be supplied by the department under Sch 'B'. All necessary fittings required for fixing the tank in position shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered..

Fixing only in repairs Rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank and removing to store complete all as specified in SSR Part I complete all as specified and directed by Engr-in-charge. Note:- Water tank 1000 litre shall be supplied by the department under Sch 'B'. All necessary fittings required for fixing the tank in position shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered..

Fixing only in repairs of 15 mm dia bore bib taps chromium plated cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge. Note:-Bib taps will be provided by department under Sch 'B'. During fixing of tap, all necessary fittings and fixtures as per site requirement shall be arranged by the contractor and the rate for the same shall be included in the quoted rate. Old taps must be returned back to store.

Fixing only in repairs pillar taps 15 mm dia, chromium plated cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. Note:-Pillar taps will be provided by department under Sch 'B'. During fixing of tap, all necessary fittings and fixtures as per site requirement shall be arranged by the contractor and the rate for the same shall be included in the quoted rate. Old taps must be returned back to store.

Fixing only in repairs Brass CP mixer any type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-charge. Note:- Mixer taps( either wall, sink, or basin mixture shall be provided by the department under Sch 'B'. During fixing of mixture, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Old mixer taps must be returned back to store.

Fixing only in repairs Stop valves 15/20 mm dia, cast copper alloy CP plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge. Note:- Stop valves shall be provided by the department under Sch 'B'. During fixing of valves, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Old stop valve must be returned back to store.

Fixing only in repairs Ball brass valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-charge. Note:-Ball valves shall be provided by the department under Sch 'B'. During fixing of valve, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate.

Fixing only in repairs Bib tap standard of PTMT any colour 15 mm dia high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. Note:- Bib taps shall be provided by the department under Sch 'B'. During fixing of taps, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate.

Fixing only in repairs Pillar taps of PTMT any colour 15 mm dia high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. Note:-Pillar taps PTMT shall be provided by the department under Sch 'B'. During fixing of taps, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate.

Fixing only in repairs CP Angle stop valve any colour 15 mm dia high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. Note:- Angle valves shall be provided by the department under Sch 'B'. During fixing of valves, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate.

Fixing only in repairs float valves 20mm high pressure of PTMT any dia with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. Note:- Ball valves shall be provided by the department under Sch 'B'. During fixing of valves, all necessary fittings required shall be arranged by the contractor and rate for the same shall be included in the quoted rate.

Fixing only in repairs Wash down water closet (Pedestal pattern), including making connections to trap (or outgoing pipe), flush, white-cementing, fitting of seat cover and overall finishing complete all as specified and directed by Engr-in-charge. Note:- Old dismantled WC should be thrown out of MoD land completely. WC shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Fixing only in repairs Wash down water closet (Squatt pattern) including concrete bedding, including making connections with trap,making good flooring complete all as specified and directed by Engr-in-charge. Note:- Old dismantled WC should be thrown out of MoD land completely.WC shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered..

Fixing only in repairs High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed by Engr-in-charge. Note:- PVC cistern shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Fixing only in repairs health faucet any type complete all as specified and directed by Engr-in-charge. Note:- Health faucet shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. The contractor shall not be entitled to make any claims in this regard.

Fixing only in repairs Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engr-in-charge. Note:- Washbasin shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered. Old dismantled Washbasin should be properly disposed off the MoD premises.

Fixing only in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engr-in-charge. Note:- Shower roses shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered..

Fixing only in repairs sinks, kitchen or laboratory any size with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe complete all as specified and directed by Engr-in-charge. Note:- Kitchen sink shall be supplied by department under Sch 'B'. All necessary fittings and fixtures like coupling, waste pipe etc, including fixing of sink properly as per site using proper clamps shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Taking down or up 15 mm bore galvanised iron tubing and connection and Fixing only GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engr-in-charge. Note:-GI tubing shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Taking down or up 20 mm bore galvanised iron tubing and connection and Fixing only GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engr-in-charge. Note:-GI tubing shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered.

Fixing only in repairs stainless steel kitchen rack plate rack in any size complete all as specified and directed by Engr-in-charge. Note:-Kitchen plate rack shall be supplied by department under Sch 'B'. All necessary fittings and fixtures shall be arranged by the contractor and rate for the same shall be included in the quoted rate. Any claims by the contractor in this regard will not be considered..

Attending plumber complaints and rectify defects (i.e flushing cistern leakage from down pipe, flush handle, PVC connection, stop valves, Leakage of bib taps, Wall mixer, basin mixer, stop/ angle cock, Pipe line leakages, etc including provision of all type of washers, rubber cone, M-seal, spindle for Bib tap/stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed by Engr-in-charge.

Attending carpenter complaints (i.e tightening of loose door/window/cup board hinges, and refixing of loose sliding bolts/tower bolt/handle, refixing of loose pelmet & curtain rod/brackets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed by Engr-in-charge.

Attending mason complaints and rectifying defects (i.e. broken wall, floor, plinth protection, plaster, refixing of tiles etc in patches, each job requiring cement not more than 2 Kg for each complaint as per site requirement, including provision of sand & aggregate as required with necessary tools & plant complete made functional to entire satisfaction complete all as specified and directed by Engr-in-charge. Note for item Nos 25, 26 and 27: Mason and carpenter complaints shall be attended and rectified within 72 Hours & plumber complaints shall be attended and rectified within 48 Hours of handing over of complaint slip. However, certain complaints, if declared as urgent by the Engineer in Charge, shall be attended and rectified by the contractor on the same day. Violation of this timeline shall attract a penalty of Rs. 250.00/Per complaint per day on the contractor.

S&F in repair of wall/floor mounted EWC with integrated vitreous china flushing cistern of 10 Ltrs capacity, single unit, complete set and making all necessary connections complete all as specified and directed by Engr-in-charge.

S&F in repairs Vitreous China urinal bowl type flat back or angle back type, size( 465x355x265m) complete including providing and fixing plugs, waste pipe 32mm dia ,bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified and directed by Engr-in-charge.

S&F in repairs plastic water closet seat white colour,closed pattern with flat bottom and cover with mild steel CP or aluminium hinge device etc complete all as specified and directed by Engr-in-charge.

Removal of air lock/blockage of water in GI and PPR Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

S&F in repairs of small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc of any size for 15mm bore GI (ISI marked) complete all as specified and directed by Engr-in-charge.

All as per item No 34 above but 20mm GI (ISI marked) complete all as specified and directed by Engr-in-charge.

S&F in repair superior quality PVC Urinal waste pipe, 32 mm bore, 650 mm long, complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC flexible waste down pipe-32 mm dia and 600 mm long complete all as specified and directed by Engr-in-charge.

S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repairs, toilet cabinet with mirror of overall size 350 x 450mm complete all as specified and directed by Engr-in-charge.

S&F grating doom of 100/110 mm dia, made of stainless steel with or without waste pipe hole, complete all as specified and directed by Engr-in-charge.

S & f in repair grating round 125 mm size. (Minimum weight 50gms) complete all as specified and directed by Engr-in-charge.

S&F of corner glass shelf 12" complete all as specified and directed by Engr-in-charge.

Demolition and breaking up drain pipe salt glazed ware, AC, PVC/CI or reinforced concrete pipes internal dia of pipe 100mm /75mm complete all as specified and directed by Engr-in-charge.

S&F 100mm dia , Cast iron soil, waste and vent pipes, sand cast pipe in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engr-in-charge.

S&F 75 mm dia Cast iron soil, waste and vent pipes, sand cast pipe in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends (TEE, Elbow & socket) any radius 110mm bore complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type, B-1 complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or MS work of any description and in any position complete all as specified and directed by Engr-in-charge.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow tubes/pipe, or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde E- 250) complete all as specified and directed by Engr-in-charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F cubical partition consisting of aluminium frame of section 65mmx40mmx1mm thick, bottom and top gap/partition filled with 6 mm thick aluminium composite panels sheet, coloured with decorative choice on both sides or top gap filled with 5.5mm thick tinted sheet glass jointing cleats, glazing clip rubber packing anodized aluminium snap beading complete all as per manufacturer’s instructions, complete all as specified and directed by Engr-in-charge.

M&L for false ceiling of approved (ISI marked) make with 4mm thick Anodised aluminium snap grid frame work for false ceiling 600x600mm size suspended system fixed to MS framed work of approved make and section as specified in SSR Part I with suitable hook/fasteners and GI/almn suspenders not less than 3mm dia @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag and dismantling old ceiling board with frame complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above GL complete all as specified and directed by Engr-in-charge.

M &L 75 mm thick PCC C-2, 1:3:6 using 40mm agg as in sub base complete all as specified and directed by Engr-in-charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.

M&L for precast machine pressed concrete interlocking pave blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness, M 35 grade wirh grey cement and pigment complete all as specified and directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.

M&L for 25 mm thick chequered cement concrete coloured tiles glossy finished of any shape any size set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.

M&L for glazed ceramic colour tile 300mmx200mmx7mm /600x300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4) complete in patches complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic (non skid) joint free edge cut coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete in patches complete all as specified and directed by Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises out side of def land complete all as specified and directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.

M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm , in floor etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engr-in-charge.

M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base lad and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.

Demolition of brick work of any type built in cement mortar in foul condition etc complete all as specified and directed by Engr-in-charge.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM (1:6) on other than fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM (1:4) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for rendering 10mm thick in CM (1:3) on fair faces of ceiling surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed by Engr-in-charge.

S&F Pressed steel door frame of size 105mm x 60mm with one or more rebates using 1.25mm thick sheet including necessary fixing lugs, lock strike plate including one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge.

S&F 35mm thick factory made IInd Class Hard wood paneled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Prelaminated particle board 18 mm thick, interior grade, ISI marked as in cupboard shutter / shelves, prelaminated one side with decorative choice lamination and other side balancing white lamination including 6mm thick teak wood liping, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engr-in-charge.

S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) windows and ventilator shutters, with aluminium grill, side hung type, without sash bars aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engr-in-charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, with and including taking down & refixing the aluminium door shutter, complete all as specified and directed by Engr-in-charge.

S&F in repair door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed by Engr-in-charge.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in doors and windows complete all as specified and directed by Engr-in-charge.

S&F 150 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F 100 mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-charge.

S&F mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed by Engr-in-charge.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type B-21 complete all as specified and directed by Engr-in-charge.

S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame fixed in repair complete all as specified and directed by Engr-in-charge.

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl punching or drilling out old glazing pins/spring clips and fixing new ones incl and M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares complete all as specified and directed by Engr-in-charge.

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 5.5 mm thick Sheet glass, ordinary quality and glazing/black glass in steel or aluminium windows complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed by Engr-in-charge.

S&F mortice lock brass 4 levers vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-charge.

S&F door seal of aluminium for doors of aluminium and wooden complete all as specified and directed by Engr-in-charge.

S&F in repair curtain rails 25mm bore decorative type chromium plated with fixing brackets, stops, rollers, etc complete all as specified and directed by Engr-in-charge.

S&F in repairs of 150 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-charge.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.

M&L for Providing precast cement concrete Type B-0 1:2:4 using (12.5 mm graded stone aggregate) louvres and jallies, 45 mm thick (measured solid), including all moldings but excluding frame Set in Cement Mortar (1:4) complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment on walls/chajjas and applying two coat of cement based paint upto four storey bldgs including necessary scaffolding/arrangement complete all as specified and directed by Engr-in-charge.

M&L for preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of distemper oil emulsion in patches (Washable oil bound distemper) on wall including cornices, pilasters complete all as specified and directed by Engr-in-charge.

K S CONSTRUCTIONS (BID ID -3316361)

M/S HARINDER SINGH (BID ID -3315729)

M/S Parshant Associates (BID ID -3316345)

M/s Nikhil Kumar Builders (BID ID -3314675)

MOHIT ENTERPRISES (BID ID -3315741)

J.P. Enterprises (BID ID -3315098)

M/s R P Enterprises (BID ID -3315924)