Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.4 LAccepted-AOC 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹59.8 L+₹6.4 L (12.0%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹61.6 L+₹8.2 L (15.3%)Rejected-Finance OPP AIR FORCE STATION VPO SORANA DISTT SAHARANPUR UP PIN 247 232 | SAHARANPUR | UTTAR PRADESH | 247232 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹62.9 L+₹9.5 L (17.9%)Rejected-Finance 2 2407 GILL COLONY NARAINPURI SAHARANPUR UP | SAHARANPUR | SAHARANPUR | UTTAR PRADESH | 247001 | L4 | Rejected-Finance Not lowest |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
12 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) AMBALA
HQ CWE (AF) Ambala Ambala Cantt 133001
PROVN OF DOG KENNEL AND ALLIED WORK SERVICES AT AF STN SARSAWA UNDER GE (AF) SARSAWA
2023_MES_598655_1
CWE/AF AMB/SAR-06/2023-24
Open Tender
Construction Works
Item Rate
180 days
SARSAWA
For MES enlisted contractor Class C Category a i and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹1,000
GE (AF) SARSAWA
₹1.1 L
Yes
16 Aug 2023
26 May 2023
14 Jul 2023
26 May 2023
12 Jul 2023
27 Jun 2023
26 May 2023 - 10 Jun 2023
Amount
Surface dressing not exceeding 15cm deep as in soft/loose soil complete all as specified & directed
Excavation in trenches, not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth; for foundation, laying pipes/cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan & not exceeding 1.5mtr in depth and getting out, in soft/loose soil complete all as specified & directed.
Excavating in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3.0 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and exceeding 1.5 mtr but not exceeding 3.0 mtr in depth and getting out in soft/loose soil complete all as specified & directed.
M&L Pre-constructional anti termite treatment by treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed.
M&L Pre-constructional anti termite treatment by treating backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified & directed.
M&L Pre-constructional anti termite treatment by treating top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & directed
M&L Pre-constructional anti termite treatment by treating soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed
M&L Pre-constructional anti termite treatment by treating soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & directed. Note for BOQ item No. 4.00 to 8.00:- For Guarantee & Security deposit refer Particulars specification.
M&L plain Cement concrete(PCC) 1:3:6 type C2 (using 40mm graded mechanically crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified & directed.
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.
Returning, filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick each in soft / loose type of soil complete all as specified & directed.
M&L mild steel TMT bars 10mm dia and over, Fe500/Fe500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
M&L mild steel TMT bars 6mm dia and over upto & inculding 10mm dia, Fe500/Fe500D grade confirming to IS-1786, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified & directed.
M&L formwork to sides of pillars, posts, struts, piers, columns & stanchions; square, circular rectangular on plan or polygonal in shape for rough finished flat surfaces of concrete complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified & directed.
M&L formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified & directed
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in chajjas complete all as specified & directed.
M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified & directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
M&L brick work with flyash burnt bricks (IS-13757), old size, Designation 75, straight or curved on plan exceeding 6mtr mean radius, built in cement mortar 1:6 complete all as specified & directed.
M&L brick work with flyash burnt bricks (IS-13757), old size, Designation 75, straight or curved on plan to any radius, built in half brick thick wall in cement mortar 1:4 complete all as specified & directed.
Earth filling under floors including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified & directed Note :- Soil obtained from excavation under respective items here-in-before shall be used for filling under this item.
M&L hardcore of broken stone or boulders, gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed
M&L 100 mm thick PCC (1:4:8) type D2 using 40 mm graded mechanically crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.
M&L machine cut Kota stone tiles, minimum size 590mm x 590mm, 18mm to 20mm thick as in flooring/stair case landing, laid over & including 20 mm thick screed bed in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.
M&L machine cut Kota stone slab 18mm to 20mm thick as in skirting /dado, riser of steps, laid over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.
M&L 75mm thick PCC 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified & directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length. (ii) 30 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume. (iii) Plinth protection shall be of width as directed and shall be laid to slope of 1:3
M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified & directed.
M&L rendering 15mm thick in cement mortar 1:4 on stone masonry or surface other than fair face of brick work masonry of wall mixed with water proofing compound as per manufacturer’s instructions, finished even and smooth without using extra cement complete all as specified & directed. Note : - Water proofing compound shall be measured & paid separetely.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling/soffits, finishing the surface even and smooth without using extra cement complete all as specified & directed
M&L preparation of newly plastered surfaces of wall(inner) and applying two coats of oil bound distemper over & including one coat of 1mm thick wall care putty of approved tint complete all as specified & directed.
M&L preparation of newly plastered surfaces of wall(outer) and applying two coat exterior acrylic emulsion paint over & including one coat of alkali resistant primer complete all as specified & directed. Note: The finishing shall be executed in Camouflaging Pattern as decided by Engr-in-Charge without any extra cost to Govt.
M&L preparation of newly plastered surfaces of ceiling / soffits and applying three coats of white wash complete all as specified & directed.
Supply only integral liquid water proofing compound(WPC), ISI marked complete all as specified & directed.
M&L coloured glazed ceramic tiles (1st quality), 300mm x 600mm x 7/8mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.
M&L 10mm thick plaster while the concrete is green over top of RCC roof slab/chajjas in cement motar 1:3 mixed with water proofing compound as per manufacturer’s instructions complete all as specified & directed. Note: Water proofing compound shall be measured & paid separetely.
M&L Atactic Polypropylene (APP) polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.5 Kg per sqm, black finish reinforced with non-woven polyster matt (Weight not less than 150 gram per Sqm), with properties of high penetration and centre core consisting of 90 micron, high molecular high density polyethylene (HMHDPE) film consisting of five layers with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 litre per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm below APP complete all as specified & directed . Notes : The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.
S&F anodized aluminium frame with power coating minimum thickness 50 micron and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.
S&F anodized aluminium grill with power coating minimum thickness 50 micron of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel screwed @ 200mm center to center complete all as specified & directed. Note: A BOO of officers shall be ordered by GE to as certiain the unit weight of aluminium grill and shall be measured accordingly.
S&F powder coated aluminium anodised window(Three track Bombay sliding window) made out hollow aluminium as mentioned below. Each shutter shall have suitable handle and locking arrganement as approved by GE. Window shall be glazed with 4.00mm thick tinted glass fixed with glazing clips, rubber beading and anodized aluminium beading etc complete all as specified & directed. Chowkhat bottom section size : 50.3mm X 26.0mm, 1.20mm thick Chowkhat top & sides section size : 50.3mm X 15.0mm, 1.00mm thick Shutter top & bottom rail section size : 101.60mm X 44.45mm, 1.50mm thick Shutter inner lock rail section size : 37.5mm x 15.0mm, 1.50mm thick Shutter side mid rail section size : 37.5mm x 15.0mm, 1.36mm thick Notes: (i) The weight of Aluminium sectons shall not be less than 0.55Kg/RM. (ii) Minimum thickness of anodization shall be 50 micron. (iii) The door/window shall be as per drawings/directions of Engingeer-in-charge and drawing may be reffered from GE office.
S&F factory made second class, hard wood(hollock), plain, framed, panelled shutters 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated complete all as specified & directed.
S&F pressed steel door frames (made out of cold rolled mild steel sheet 1.25mm thick), size 105mm x 60mm with one or more rebates including fixing necessary lugs, 3 Nos 100 mm long MS butt hinges per shutter, lock strike plate etc. complete all as specified & directed.
M&L preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over & including one coat of pink primer complete all as specified & directed.
M&L preparation of new steel and iron based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over & including one coat of red oxide primer complete all as specified & directed.
S&F stainless steel hinges 100mm long, medium weight complete all as specified & directed.
S&F aluminium anodised barrel tower bolt 200mm size extruded section, complete all as specified & directed.
S&F extruded aluminium alloy handles 150mm size fabricated type anodised complete all as specified & directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.
M&L AC door curtain made up of transparent PVC sheet 3/4mm thick hinged at top, the pvc sheet shall be clear, flexible & barriers to the exchange of air & dust complete all as specified & directed.
M&L 400 micron thick HDPE sheet water proof, wrinkle free without puncture having minimum weight 390gm/sqm over tack coat as specified complete all as specified & directed.
M&L machine cut Granite stone slab 18mm to 20mm thick, table rubbed and polished, as on shelves/ cooking platform/steps/pillars etc, like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over & including 15mm thick screed bed or bedding layers in cement mortar 1:4, set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
Removal of excavated soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed.
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded mechanically crushed stone aggregate), as in sub base complete all as specified & directed.
M&L coloured, non-skid, jointfree, ceramic tiles, 1st quality, 7 to 8 mm thick, square/ rectangular, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 15mm thick screed bed or bedding layers in cement mortar 1:4, complete all as specified & directed.
M&L PCC 1:2:4, type B-1, using 20mm graded mechanically crushed stone aggregate as in filling and mass concrete for water tank / feeding / platform including necessary formwork complete all as specified & directed.
S&F rotational moulded polyethylene(PVC) water storage tank, HDPE, triple layered, cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 litre and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gram) complete all as specified & directed. Note: Ball brass valve of PTMT included in quoted rates.
S&F galvanized iron water tubes 15 mm bore, medium grade, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F galvanized iron water tubes 20 mm bore, medium grade, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F 15 mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified & directed.
S&F sink with drainage board made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS brackets and connecting union to pipe, over all size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F 40mm dia Brass chromium plated bottle traps for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed. Note :- Excavation & earthwork shall be measured & paid separately.
M&L 150mmx100mm salt-glazed stoneware gully traps, square or round mouthed, type 'P' complete all as specified & directed.
M&L Vitrified ceramic tiles, coloured, dark shade, 10 mm thick, square/ rectangular, polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6, complete all as specified & directed.
M&L Vitrified ceramic tiles, coloured, dark shade, 10 mm thick, square/ rectangular, polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.
S&F factory made, solid PVC Door Frame of size 50mm x 47mm made out of 5mm both side prelaminted sheet reinforced with mild steel square tube, edges will be painted to match with prelaminated sheet, suppling & fixing in opening as per specification & drawing as per SSR Part –II complete all as specified & directed.
S&F factory made, solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded both side prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelaminted PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelaminated PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per SSR Part –II complete all as sepcified & directed.
S&F PVC connection 600 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified & directed.
S&F 15mm bore stop / angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified & directed.
S&F 110 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal with access door complete all as specified & directed.
S&F 110mm bore PVC (SWR) vent cowl complete all as specified & directed.
S&F cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) grating including jointing with solvent cement, diameter of outlet 100mm, complete all as specified & directed.
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinge complete all as specified & directed.
S&F PVC low level flushing cistern, white, valveless syphonic action type 10 litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified & directed.
S&F chromium plated Brass health faucet for EWC with including PVC Connection 1 mtr long suitable for 15mm bore with all connected fittings complete all as specified & directed.
S&F fancy type 15mm bore Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified & directed.
S&F vitreous china counter top/down wash hand basin size 450mm x 525mm x 195mm shape oval including 32 mm CP waste coupling complete all as specified & directed.
S&F tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges fixed to wall complete all as specified & directed
M&L 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long complete all as specified & directed.
M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 Gde E-165 etc complete all as specified & directed
M&L rolled mild steel work in tubular truess, purlin, rafter, columns etc including welding, butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified & directed
M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour(as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified & directed
M&L preparation of new steel surfaces of any description, not exceeding 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint of approved tint over & including one coat of red oxide primer complete all as specified & directed.
M&L stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified & directed
Excavation in post holes each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50mtr and making good surface complete all as specified & directed
S&F mild steel section as Joist, channel, angle, tubes, flats or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) quality-B including cutting, bending, complete all as specified & directed
M&L 40 mm thick 2nd class hardwood boarding, clean sawn with butt joints fixed with screws to any type of frame, plate etc in any situation complete all as specified & directed
M&L PCC 1:4:8, type D2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
M&L plain cement concrete(PCC) 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in lintels upto 1.5mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork to complete all as specified & directed.
M&L preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified & directed
M&L 450mm bore Reinforced concrete pipe, NP3 with one collar per length of pipe, laid in trenches and jonted complete all as specified & directed.
M&L providing & laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed.
M&L providing & laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed.
S&F double legged informatory sign board of size 1.20 mtr x 1.20 mtr fixed on single frame, both side and meeting back to back on the stainless steel 50 mm square pipe. The boards are of high intensity grade reto-reflective sheeting madeout of 2mm thick aluminium sheet confirming to IS 736, colour as approved by Engineer-in-charge. The lettering will be computerized cut of high intesity grade white sheeting and mechanically fixed on board over vertical post of 50mm stainless steel square pipe having 2 Nos flat ion strip of 40mm x 5mm, 0.30 mtr long on bottom & fixed at ground with PCC 1:2:4 type B-1 of size 450mm x 450mm x 750mm complete all as specified & directed. Notes: (i) The stainless steel pipe shall be of wall thickness 2.0mm & SS 304 grade. The overall height of sign board shall be 3.20 mtr from GL. (ii) The depth of PCC work shall be 750mm below GL. Necessary earthwork, formwork & concrete work included in quoted rates. (iii) The MS iron work shall be painted with two coat of synthetic enamel paint including one coat redoxide primer.
Excavating over areas, not exceeding 1.5 mtr deep and getting out in soft/ loose soil complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified & directed.
M&L formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.
Construction of Septic tank, 10 users, single compartment complete all as specified & shown on drawings bearing No. CEJZ/STD-263/90, sheet 1/9 to 9/9.
Construction of Soakage well 1.2mtr dia & 3.0mtr deep complete all as specified & shown on drawings bearing No. CEJZ/STD-301/90, sheet 1/4 to 4/4.
M&L 150mm bore Reinforced concrete pipe, NP2 with one collar per length of pipe, laid in trenches and jonted complete all as specified & directed.
M&L plain cement concrete(PCC) bed 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregates to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified & directed. Note: The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.
M&L plain cement concrete(PCC) 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edges including necessary formwork to complete all as specified & directed.
M&L plain cement concrete(PCC) 1:3:6, type C-1, using 20 mm graded mechanically crushed stone aggregates as in lintels upto 1.5mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork to complete all as specified & directed.
M&L precast cement concrete 1:2:4, type B-1 (using 20mm graded mechanically crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified & directed. Note: Reinforcement shall be measured & paid seperately.
M&L PCC(1:2:4) type B-1 (using 20mm graded mechanically crushed stone aggregate) in surface channels or drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified & directed.
M&L PCC 1:2:4, type B-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe-290) complete all as specified & directed.
S&F galvanized iron chain link fencing 4mm dia, made of mild steel GI mesh 50mm x 50mm weight not less than 4Kg per Sqm, binding the same with binding wires including all necessary drilling , bolting or riveting etc complete all as specified & directed. Notes: (i) Line wire 12mm dia, MS flat iron & Nut/bolts shall be measured & paid seperately. (ii) A BOO of officers shall be ordered by GE to as certiain the unit weight of chain link fencing and shall be measured accordingly.
S&F mild steel round bars as in tie bars of 12 mm dia, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Fe 290 (Gde -E-165) complete all as specified & directed. Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above
S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other end or screwed both ends, each screwed end to be fitted with one washers and with one hexagonal nut of exceeding 5cm but not exceeding 10cm length with dia of neck 11mm to 15mm etc complete all as specified & directed.
M&L preparation of newly untreated steel surfaces of any description over 10cm in width or girth and applying one coat of zinc chrome primer complete all as specified & directed.
S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild ste complete all as specified & directed.
S&F 600mm dia Punched tape concertina coil any type coil size of any type of standards, rails etc including provision of mild steel(annealed) binding wire complete all as specified & directed. Note: A BOO of officers shall be ordered by GE to as certiain the unit weight of concertina coil and shall be measured accordingly.
S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde-E-165) complete all as specified & directed.
S&F steel body desert cooler electric driven single phase having 18 inch exhaust fan motor with nominal air flow capacity of 5000 cum per hour including submersible water pump heavy duty with water storege capacity upto 140 Ltrs with wood pads 03 sides over flow pipe drain pipe water filling point with authomatic float valve cooler body made of powder coated metal sheet 3.15 mm thick complete all as specified & directed.
S&F electric water heater, storage type with SS tank and outer body made out of ABS & PP, heating element of 2 KW storage capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, SS connection piece of suitable length etc complete all as specified & directed.
S&F refrigerator, electric driven (single phase), capacity 180 Litres BEE 5 star rated single door complete all as specified & directed.
S&F Voltage stabilizer for automatic operation, single phase, copper wound, naturally air cooled, indoor type & designed for input variation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of +/-2.5% and of capacity 2 KVA complete all as specified & directed.
M&L for cutting GI pipes 100mm bore for insertion of new tees, branches connection for new branch including any tee and necessary accessories complete all as specified & directed.
M&L construction of brick masonary valve pit, internal size 45 cm x 45 cm, 45 cm deep (depth to be reckoned from top of the PCC in foundation to the top of MS cover), 150 mm thick PCC 1:4:8, type D-2 as in foundation & 150 mm thick PCC 1:2:4 type B-2 as in coping with & including necessary form work, brick work in cement mortar 1:4 using old size sub class burnt clay bricks, 15mm thick internal plaster in cement mortar 1:4 even & smooth, Pit cover shall be of MS sheet 3.0 mm thick with complete locking & hinging arrangement and painting with two coats of black synthetic enamel paint over one coat of red oxide primer complete all as shown on drawing and directed. Note:- (i) The Excavation & eathwork shall be in any type of soil. The removal of surplus soil shall be to a distance not exceeding 50mtr. (ii) The valve pit shall be constructed as per drg No CE AF/STD-28/94 dated 01-Feb-1994, Sheet No 1/2 & 2/2. The drawings may be referred from office GE office. (iii) Cost shall be inclusive of all items of work required for the execution (as shown on drawing) and entire completion of this item and noting extra shall be paid seprately in any other item(s).
S&F galvanized iron water tubes 25 mm bore, medium grade, with all fittings and fixed complete to wall & ceiling with and including cutting chasing whereever required or laid in floor complete all as specified & directed.
S&F galvanized iron water tubes 15 mm bore, medium grade, with all fittings and fixed complete to wall & ceiling with and including cutting chasing whereever required or laid in floor complete all as specified & directed.
S&F 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.
S&F 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.
M&L Sand cushioning to electric cable with a layer of dry fine sand 8cm thick before laying the cable and 15cm thick after laying the cable (punned down to 18cm thick after laying and stretching of cable ) complete all as specified & directed.
Supply and laying old size, common burnt clay, sub class 'B' bricks, designation 75, laid flat & dry for protection of electric cable in trenches, adjacent to each other, perpendicular to central axis of cable complete all as specified & directed.
M&L GI pipe 32mm bore , light grade, for cable protection as in road crossing under road/path, under floor/plinth protection, fixed to wall/pole with fixing arrangement with suitable size of MS clamps, nuts,bolts & washers complete all as specified & directed .
Supply, laying, jointing, testing and commissioning of LT electric cable, 1100 Volts grade, heavy duty, XLPE insulated, armoured electric power cable with aluminium conductor of cross sectional area 10sqmm, 4 core conforming to IS- 7098 (Part I) 1988 laid as in trenches or fixed along the wall/pole or passing through pipes/ducts etc, complete all as specified & directed.
Supply, laying, jointing, testing and commissioning of LT electric cable, 1100 Volts grade, heavy duty, XLPE insulated, armoured electric power cable with aluminium conductor of cross sectional area 6sqmm, 2 core conforming to IS- 7098 (Part I) 1988 laid as in trenches or fixed along the wall/pole or passing through pipes/ducts etc, complete all as specified & directed.
M&L MCCB 63 Amps 4 pole 16 KA duly enclosed in 3.15 mm CRCA sheet CPRI tested cubical type totally enclosed wheather dust and vermin proof with front opening including connecting all incoming and outgoing cable feeders with necessary lugs ferrules etc. The panel should have angle iron support of size 50mm x 50mm x 6mm with 4 legs of 750 mm long (300 mm grouted in PCC and 450 mm above GL) on the base all around including PCC foundation support, well finishing with cement mortar complete all as specified & directed.
M&L earthing complete with galvanized steel earth plate 60cm X 60cm X 6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level, connected to GI earth lead wire 4.00mm dia upto 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade including protection pipe GI medium grade 15mm bore , wire mesh, funnel,lugs, salt, charcoal dust, excavation & earthwork in soft/losse soil and refilling pit chamber with PCC 1:3:6 type C-1 using 20 mm graded mechnically crushed stone aggregates , RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates pit cover slab 40 mm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways including necessary form work all as shown in electrical plate No 3 of SSR part-I, including testing on completion on site complete all as specified & directed. Notes :- Any variation in length of earth lead and protection pipe of earth lead shall be measured & paid seperately. On testing if the earth resistance is not obtained, earthing will be generated at no extra cost ,till the desired earth resistance is obtained. The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.
S&F LED Solar street light fitting 20 Watt not less than 125 Lumen per watt delivered lumen efficieny total system not less than 5000 lumen solar PV module should be 12 volt, 60watt Mono-crystalline & solar charge controller should be MPPT & its capacity not less than 12volt, 6 Amp with battery (Li Fe P40) with BMS 12.8 volt, 24 Ah & its backup should be 2 days with dimming & its life span must be more than 50000 Hrs complete all as specified & directed.
S&F post top lantern LED type 40 Watt 230 Volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 class protection with aluminium die cast housing cum heat sink circular canopy and clear acrylic cover for 360 degree indirect uniform glare free light distribution impact and corrosion resistant operating voltage range 140 volt to 270 volt, total system lumen not less than 3200 lumens lumen efficiency + 80 lumen/watt, THDS 20 CRI>80, colour temperature 6500K, inbuilt surege protection = Kv, 50000 Hrs burning hours complete complete all as specified & directed.
S& F 50mm bore GI pipe medium grade for fixing of solar street light fixed complete all as specified & directed .
S&F PVC junction box (water proof) of size 250mm x 250mm x 160mm for street light poles with connector for connection incoming and outgoing cables including provn of 01 No MCB SP 06 Amp to control the pole light circuit including 02 Nos of AIuminium Busbar mounting in the insulator including suitable size of double compression cable glands for incoming and outgoing cables complete all as specified & directed .
S&F PVC insulated copper wire 1.5 Sqmm 3 Core for street light fitting from juction box to fitting complete all as specified & directed .
M&L concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including non metallic rigid PVC conduit not less than 20mm bore medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 1.5 sqmm connected to common earth and earth dolly for one light point, ceiling fan/exhaust fan point controlled by one way switch 5/6 amp complete all as specified & directed.
Description all as per BOQ item No. 144.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the independent board.
Description all as per BOQ item No. 144.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the same board.
M&L concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including non metallic rigid PVC conduit not less than 25mm bore medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 2.5 sqmm connected to common earth and earth dolly for one socket outlet point 15/16 amp controlled by one way switch on the independent board complete all as specified & directed. Notes for BOQ item No. 144.00 to 147.00 :- (i) S&F of Switches, socket outlets, bell pushes and fan regulators etc. shall be measured and paid for separately. (ii) Rate quoted shall be inclusive of cutting chases in wall and making good in cement mortar 1:3 & finishing the disturbed surfaces to match with the existing surfaces.
M&L surface point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including PVC casing & caping minimum size 20mm x 12mm, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 1.5 sqmm connected to common earth and earth dolly for one light point, ceiling fan/exhaust fan point controlled by one way switch 5/6 amp complete all as specified & directed.
Description all as per BOQ item No. 148.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the independent board.
M&L surface point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including PVC casing & caping minimum size 20mm x 12mm, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 2.5 sqmm connected to common earth and earth dolly for one socket outlet point 15/16 amp controlled by one way switch on the independent board complete all as specified & directed. Notes for BOQ item No. 148.00 to 150.00 :- (i) S&F of Switches, socket outlets, bell pushes and fan regulators etc. shall be measured and paid for separately.
S&F switch piano, flush type, 5/6 amp, single pole, one way complete all as specified & directed.
S&F switch piano, flush type, 15/16 amp, single pole, one way complete all as specified & directed.
S&F socket outlet, flush type, 2 in 1, 3 pin, 5/6 amp, complete all as specified & directed.
S&F switch piano, flush type, 15/16 amp, single pole, one way complete all as specified & directed.
S&F stepped type electronic fan regulator flush type, single pole 240 volts, 50 Hz, 4 step type, 100 watts, on the existing phenolic laminated sheet etc. as required complete all as specified & directed.
S&F ceiling rose, surface bakelite 3 terminals, isolated body complete all as specified & directed.
S&F heavy duty, exhaust fan, single phase, 230/240 volt, 300mm sweep, steel body, 1400 RPM, totally enclosed heavy duty motor with copper winding including mounting brackets fixing on frame including S&F MS sheet 1.00mm thick as louver shutter for exhaust fan with all accessories fixed on wall and making connetions with twisted copper flexible wire 23/0.0076mm complete all as specified & directed.
S&F heavy duty, exhaust fan, single phase, 230/240 volt, 380mm sweep, steel body, 1400 RPM, totally enclosed heavy duty motor with copper winding including mounting brackets fixing on frame including S&F MS sheet 1.00mm thick as louver shutter for exhaust fan with all accessories fixed on wall and making connetions with twisted copper flexible wire 23/0.0076mm complete all as specified & directed.
S&F ceiling fans complete with blades, down rods and accessories, 230 volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) hanging, connecting with existing point complete all as specified & directed.
S&F wall mounted fan, oscillating type, AC, single phase 230/240 volts of size 300 mm sweep including suitable size of fashtner complete all as specified & directed
S&F sheet metal enclosure distribution board, 230 volt, single pole and neutral, IP 43 protection, with 200 Amps rated copper busbar and neutral link, 6 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified & directed.
S&F sheet metal enclosure distribution board, 230 volt, single pole and neutral, IP 43 protection, with 200 Amps rated copper busbar and neutral link, 4 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified & directed.
S&F single pole & neutral, sheet metal enclosure with socket plug top with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volts complete all as specified & directed.
S&F MCB, single pole, 5 to 32 Amp, B curve, 10 kA capacity, 240 volts complete all as specified & directed.
S&F MCB, single pole & neutral, 16 to 40 Amp, B curve, 10 kA capacity, 240 volts complete all as specified & directed.
S&F LED lights fitting 1 x 20watt, 140 volt to 270 volt, AC decorative box type with driver, driver efficiency 80%, lumen efficiency =100lumen/watt, THD< 20, CRI>80, colour temperature 6500K, inbuilt surge protection =2.5Kv, isolation =3.75 and zero mercury content including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.
S&F LED lights fitting 15 watt 110 Volt to 220 Volt, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant complete all as specified & directed.
Gupta Enterprises
SUBHASH CHAND CONTRACTOR
RAMAPATI ENGINEERING SERVICES
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .