Various Electrical work of electric supply.

Amount

Supply of The Line Material as per Relevent ISS :-

Holding Clamp for TF

Nut & Bolt with washer

Stone Pad

Danger Board

Barbed Wire

Top Channel

MS Angle with Clamp

PG Clamp

Clamp with Nut & Bolt

33 KV Cable Jonting Kit O/D 3x300 sqmm

33 KV Cable Jonting Kit I/D 3x300 sqmm

Erection Work :-

Safe carriage of line material from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

Safe carriage of following VCB from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

11 KV VCB

33 KV VCB

Safe carriage of 33 KV XLPE Cable 3x300 sqmm from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

Safe Carriage of 8.5 Mtr Long PCC Pole from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side

Safe Carriage of 13 Mtr Long ST Pole from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side

Safe Carriage of 10 KVA TF from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side.

Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc and other work complete as per RESPO norms.

Erection of 13 mtr long ST Pole as Double Pole/Section Pole including fixing of HT/LT accessories etc and other work complete as per RESPO norms.

Dismantling and removal of existing ACSR Weasel/Dog conductor conductor from the various area, stacking and placement their coils and their in the safer place including cost of lobour T&P etc. required for proper completion of work.

Laying sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

(a) ACSR Weseal Conductor

(b) ACSR Dog Conductor

(c) 33 KV XLPE Cable 3x300 sqmm

(d) LT AB Cable 3x50 sqmm

Re-sagging of loose Weseal/Dog conductor as per direction of supervising engineer. It includes the cost of labour, T & P carrier etc required for proper completion of work.

Stone Pad

PG Clamp

Earthing Complete

33 KV VCB 800A, 750 MVA

Making of 33 KV VCB double TF control panel NCT 200/100 1Amp with structure as per RESPO norms.

11 KV VCB O/G CTR 200/100/5A, 350 MVA

33 KV Cable Jonting Kit O/D 3x300 sqmm

33 KV Cable Jonting Kit I/D 3x300 sqmm

Danger Board with clamp

Erection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Mounting of 10 KVA TF including making of the connection etc. complete.

Any other material/consumable required to complete the work shall be arrange by the contractor at his own cost.

Carriage of ACSR Dog/Rabbit/Weseal Conductor (Scrap) from pit site to JE store/store center Etah in distance range 0 to 60 km. including loading & unloading and proper stacking.

YASH URJAA VARDHAN PVT. LTD.