Macadamization of parkings/ link roads including new Transport Yard and faculty quarters at SKIMS Soura.

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5mall kinds of soil

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant, the desired density, complete as per specifications and directions of engineer-in-charge

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.With rapid setting bitumen emulsion On W.B.M. /W.M.M. @ 0.75 Kg/sqm.

Providing and applying tack coat using hot straight run bitumen of grade – vg-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm.

Providing / laying of 50mm thick premix bituminous macadam base course with stone aggregate of quality size & grading as specified in cpwd specifications & straight run bitumen of grade vg-10 @ 3.3% by weight of total mix @ 66kgs/cum including hot mixing of stone aggregate and bitumen in hot mix plant, transporting and laying mixed material with paver finisher to the required level and grade, rolling with road roller of 08 to 10 tonne capacity to achieve the required compaction and density (50mm compacted thickness complete) inluding cost & carriage of all materials involved from source upto site of work complete.

Providing and laying 25mm thick compacted bituminous of vg 10 @ 5% by wt of total mix to the wt total aggregate and mixed and plant consolidated with 8-10 tons road roller to acquire required cost and layed with paver finished with 8-10 cap road roller to achieve req density and camber incl all carriages involved upto work of sight complete job

Providing and laying seal coat as per specification of morth 0.025mm and pssing to 18 no seal with vg grade 10 bitumenious to be mixed in well equipped hot mixed plant and transportation of same by mech means to work of sight and per 100 sqm of road surface including rolling and finishing with road all complete.