Constt. of sanitary complex (ladies and gents) at sub centre phinter

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth as directed:

All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) (Including all leads and lifts carriages of material by MT/HL)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (Including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including all leads and lifts carriages of material by MT/HL)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)(Including all leads and lifts carriages of material by MT/HL)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. (Including all leads and lifts carriages of material by MT/HL)

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cm wide

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade

Providing and placing on terrace on all floor levels polythene water storage tank ISI;12701 marked indicating the bis no with cover and suitable locking arrangements and making the necessary holes for inlet, outlet and overflow pipes including fitting and the base port for tanks syntax , electroplast , star , lotus, or equivalent having ISI make .

Providing and fixing Motor pump of ½ HP of sharp ,bajaj,or equivalent make including fittings (complete job)

Providing and fixing soap dish of approved quality

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making the walls etc.: Internal work-Exposed on wall

15 mm dia. nominal bore .

20 mm dia. nominal bore .

Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work)

15mm dia nominal bore

Providing and fixing wash basin with C.I /M.S brackets 15mm C.P bras pillar taps , 32mm C.P bras waste of standard pattern , including Painting of fittings and brackets , cutting and making the good walls wherever . white vitrerous China . size wash basin 630x450mm with pair of 15mm c.p brass pillar tap .(make cera/equivalent)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.(make cera/equivalent)

Providing and fixing cp bib cock of approved quality 15mm nominal bore complete job (make jaquar/ cera /equivalent) Short nose

Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to IS:8931. 15mm nominal bore complete job .(make jaquar/cera/equivalent)

Providing and fixing 110mm dia. PVC waste water / sewerage pipe of 4 kg pressure per sqm of supreme / prince/ finoeix make prakash surya

Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats 15mm dia nominal bore

Providing and fixing white vitrous china pedestal type water closet ( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled device conforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.(make cera/equivalent)

Providing and fixing of white china pedistal urinal of approved brand and make including all job complete all lead lifts and carriage complete

Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, over 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing of 1 mm thick M.S sheet door with frame of 40*40*6mm angle iron 3 mm M.S gusset plate at the junction and corner all necessary fittings complete including applying a priming coat of approved steel primer using M.S angles 40*40*6 mm for diagonal braces

Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R.

TILAK RAJ