MAINT AND MISC CIVIL REPAIRS AND PERIODICAL SERVICES TO MD AND OTM ACCN AT HALLOMAJRA UNDER GE CHANDIGARH.

Amount

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying one coat of white wash on wall surface complete all as specified & as directed.

All as per above Srl item No 1 but on ceiling.

Preparation of old decorated plastered surfaces of walls by rubbing down,washing,& stopping of distempered surfaces and applying one coat of oil bound distemper (Ist quality) including cleaning the floor, joinery surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

M&L Complete removal of existing treatment of plastered surfaces wall and applying two coats of oil bound distermper (Ist quality) , white or colour over a coat of chalk whitening primer , including cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying one coat of cement base paint on wall surface including cleaning the floor, joinery surfaces, glass panes complete all as specified. Make/Brand : Super Snowcem/Duracem/Shalimar

M&L Complete removal of existing treatment of plastered surfaces wall and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer , including cleaning the floor / joinery, glass panes etc complete all as specified. Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) Dulux ( weather shield max), Nerolac (Excel Total). NOTE : Work will be carried out up to a height of 10 mtr from ground level. Rates for Necessary scaffoldings/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item .

M&L Preparation old wooden surface and applying one coat of synthetic enamel paint , any description over 10 cm in width or girth not otherwise described complete all as specified and directed. Make/Brand: Asian Paints/Berger/Shalimar

M&L for preparation of old painted surfaces of steel over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified. Make/Brand: Asian Paints/Berger/Shalimar

Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed

M&L Rendering 10 mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surface, finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface, finished the surface even and smooth without using extra cement , complete, all as specified

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L preparing newly plastered wall surfaces and applying applying two coats of oil bound distermper, white or colour over a coat of chalk whitening primer , including cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

M&L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified.

M&L preparing newly plastered wall surfaces and applying two coats of cement base paint, white or colour over a coat of alkali resistant primer , including cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Super Snowcem/Duracem/Shalimar

M&L for preparation of newly plastered surface of walls and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer. NOTE: Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) Dulux ( weather shield max), Nerolac (Excel Total)

M&L for applying wall care putty 1-2 mm thick on wall/ceiling surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified. MAKE: BIRLA, JK, WEBER (SAINT GOBAIN).

Re-Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high

Repairing the edges of concrete chajjas, facias, slabs, columns and the like by providing PCC (1:2:4) type B0 incl all necessary form work and or provn of rendering 15mm th(average thickness) in cement mortar 1:3 , after applying a coat of cement slurry @ 3 kg/sqm of surface, finished even and fair, surface area not exc 300 mm wide in patches incl taking down swoolen/damaged plaster of concrete complete all as specified

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed

M&L 75mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate) as in sub base under floor/path all as specified and directed.

M&L 25 mm thick Plain cement concrete 1:2:4 Type B0 (12.5mm graded aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layered (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layered (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L Vitrified ceramic tiles light shade 8 to 9 mm thick ( square/rectangular) polished, area of each tiles n.exc. 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed

All as per item No 31 above but in vertical surface (dado/skirting) to match the sahde of floor tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles 350x 250x 7 / 450X 350X 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with Grey cement and no pigment over 15mm thick screed bed of CM1:4

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) including removing of debris out side MoD land complete all as specified and directed

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in CM 1:4 complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc laid ,bedded and pointed in any mortar.

S&F 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar works complete all as specified

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store

Refixing of old steel tubing of 15mm bore including all fittings to walls, ceiling and laiding floors

S&F 15mm bore medium grade tubes, glvanized with all fittings anf fixed complete to walls and ceilings or laid in floors

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store

Refixing of old steel tubing of 20mm bore including all fittings to walls, ceiling and laiding floors

S&F 20mm bore medium grade tubes, glvanized with all fittings anf fixed complete to walls and ceilings or laid in floors

S&F in repairs 15 mm gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

S&F in repairs 20 mm gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated fancy type (ISI marked) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 15mm bore stop/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe,

S&F in repairs 15mm Stop valve, cast copper alloy (fancy type) chromium plated with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions,and fixed of 15mm bore complete all as specified and directed.

S&F fixed in repairs 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&Fin repairs PVC waste pipe 32mm bore all as specified

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S & F 110mm bore PVC (SWR) bends any radius

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exc 1Sqm and not exc. 2 Sqm each, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification

S&F Factory made soild PVC profiled panel door shutter 28mm thick withintegral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as , with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site complete, all as specified and directed.

Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

35mm thick 2nd class hard wood (Kail) Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc with powder coating (min thickness 50 micron). complete all as specified

S&F Anodised aluminium door shutters,aluminium section gauge 14 including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 01 No Tower Bolt, hinges,anodised aluminum snap beading screws etc with powder coating (min thickness 50 micron) complete all as specified.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165

S&F Factory made box steel windows/Ventilators with side hung shutters including hinges,steel handle,steel peg stay and MS tower bolt 150mm long complete with glazing bars,dovetailed or welded as per Drg No CECZ/TD-219 of HQ CECZ all as specified and as directed.

S&F Factory made box steel windows/Ventilators with side hung shutters including hinges,steel handle,steel peg stay and MS tower bolt 150mm long complete without glazing bars,dovetailed or welded as per Drg No CECZ/TD-219 of HQ CECZ all as specified and as directed..

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, handles 2 Nos, 02 Nos Tower Bolt, anodised aluminium snap beading, screws etc with powder coating (min thickness 50 micron) complete all as specified. complete all as specified

S&F aluminium anodised (Deco) pattern grill 75x75mm size design No 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and direcetd.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality not exc 0.50Sqm in each pane fixed with oil putty/rubber/aluminium beading complete all as specified in repairs.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty/rubber/aluminium beading in squares not exc 0.5 sq.m in each pane

S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty/rubber/aluminium beading in square exc 0.5sq. m in each pane complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

S&F Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.

S&F Madrasidana plaster on exterior walls in two layers under and including layer 12mm cement plaster 1:4 furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg per Sqm ,top layer 15 mm CM 1:0.5:2 (1 cement,0.5 sand,2 stone chippings 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified and directed.

S&F Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F in repair Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&L Steel curtain rod (Fancy Type) of 20 mm dia including curtain rings complete all as specified

S&F Steel bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.ISI marked.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E-250) quality-A

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 290 (Gde-E-165)

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Puneet Sharma

OJHA ENTERPRISES

M/s Krishan Aggarwal

KUMAR AND COMPANY