REPAIR REHABILITAION AND PERIODICAL SERVICES TO OTM ACCN AND MD ACCN AT CEPTAM DCA ALISDA AND MTRDC UNDER AGE B R I OF GE I R AND D WEST BANGALORE

Amount

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and directed.

Demolition of PCC (unreinforced) of any description & in any position not otherwise specifically provided complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar etc complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land all as specified and as directed.

Demolition of concrete block walling, RR masonary in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specifed and directed.

Taking down chowkat or frames with shutters (with out taking off syhutters from the frame) n. exc 1.50 sqm each and removing from site all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified and as directed.

Dismantling of ceiling board /Wall panelling of any thickness and of any description including cover fillets complete all as specifed and directed.

Dismantling of aluminium partition / windows of any size and any description with frame complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed.

Dismantling water tanks of exc 250 & n exc 500 Ltrs capacity and removing to store etc complete all as specified and directed.

Dismantling water tanks of exc 500 & n exc 1000 Ltrs capacity and removing to store etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specifed and directed.

M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation,filling and mass concrete all as specified and directed.

M&L for PCC 1:5:10 type E2,(using 40mm graded stone aggregates) as in sunken,filling and mass concrete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of motar 15 mm thick for laying floor finished in cement mortar 1:6 complete all as specifed and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in flooring over and including 15mm thick screed bed in CM 1:6 complete all as specifed and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specifed and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.

M&L for glazed ceramic coloured tiles of size 300 x 200 x 7mm vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement mortar 1:4 all as specified and directed.

M&L Granite work of 20mm thick, (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed layer of 15 mm thick in CM 1:4 all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1 : 3 : 6 type C1 (using 20 mm graded stone aggregate) as in paving/ plinth protection laid in pannels including necessary form work, finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including 15mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes complete all as specified.

M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded stone agg) with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specifed and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finish the surface even and smooth including mixing of WPC complete all as specified and as directed. Note: WPC shall be measured and paid seperately

Supplying only liquid based water proofing compound complete all as specified and directed.

M&L for 1mm thick wall care putty on wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of suitable primer complete all as specified and directed.

S&F for 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.

S&F for 35mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F for 35 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides etc complete all as specified and directed.

S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification.complete all as specified and directed.

S&F for butt hinges of stainless steel 100mm size complete all as specifed and directed.

S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specifed and directed.

S&F for 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type. complete all as specified and directed.

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and directed.

S&F for powder coated aluminium frame and shutters for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed.

S & F in repairs 7 mm thick Aluminium grill of make "Deco grill" and DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel and fixed to windows/ ventilators including channel complete all as approved and directed.

S&F for 4 mm thick figured glass, pin head type and glazing with oil putty / aluminium beading in square not exc 0.50 Sqm each in each pane all as specified and directed.

S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm each in each pane all as specified and directed.

S&F for 4.8 mm thick sheet glass ordinary quality fixed in aluminium framenot exc 0.50 Sqm each in each pane complete all as specified and directed.

Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work ( New length of frame re puttied shall be measured ) complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed.

M&L for welding in repairs to steel windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded n. exc 6mm complete all as specified and directed.

Material and labour for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as directed by Engineer-in-Charge including taking down old false ceiling and grid. Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of Make Aerolite or techno commercial equivalent.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers of 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and directed.

Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and seamless finish on joints etc complete all as specified and directed.

M&L for preparation new ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

M&L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and directed.

M&L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and directed.

Supplying and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in floor/wall including fittings as required etc complete all as specified

Supplying and laying 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in floor/wall including fittings as required etc complete all as specified

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe( [Minimum weight for 20 mm – 210 gms) complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe( [Minimum weight for 20 mm – 210 gms) complete all as specified and directed.

S&F in repairs counter top WHB of size 550 x 430 x 195 mm of Parryware make (model:C0466(SP)) including taking down the existing unserviceable WHB complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets etc complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and directed.

S&F in repairs Vitreous China squatting pan of orissa pattern size 580mm x 440 mm white with `P' or `S' trap, front or back inlet & integrated foot rests, including provision of cement concrete bedding complete all as specified and directed.

S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed.

S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed.

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) etc complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets etc complete all as specified and directed.

S&F in repairs CP Bib taps(Long body) fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe etc complete all as specified and directed.

S&F in repairs swan neck pillar tap (make:Jaquar) complete all as specified and directed.

S&F in repair Angle cock of 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed.

S&F in repair for 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair for CP towel rail of 20mm dia with hook 600mm long complete all as specifed and directed.

S&F in repair for CP shower rose fancy type complete all as specifed and directed.

S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair 15 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve etc complete all as specified and directed.

S&F 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and directed [Minimum weight for 20 mm – 210 gms] .

S&F 25 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve complete all as specified and directed [Minimum weight for 25 mm – 455 gms] .

S&F PTMT waste coupling of 32 mm dia ( half or full threaded ) including taking down old coupling of any description complete all as specified and directed [Minimum weight for 32 mm – 45 gms].

S&F PTMT waste coupling of 40 mm dia ( half or full threaded ) including taking down old coupling of any description complete all as specified and directed [Minimum weight for 40 mm –60 gms].

S&F grating doom 100 mm dia of PTMT, including taking down old grating doom complete all as specified and as directed [Minimum weight-25 gms].

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, including taking down old PVC connection all as specified and directed.

S&F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed.

S&F in repair 160 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and directed.

S&F in repair PVC (SWR) branch piece single equal of bore 75 mm dia, ,complete all as specified and directed

S&F PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and directed.

S&F in repair PVC (SWR) branch piece single equal of bore 110 mm dia, all as specified and directed

S&F PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and directed.

S&F in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and directed. Make: Prayag Cat no: 327

S&F 75mm dia outlet PVC multi floor trap with grating including dismantling the damaged trap all as specified and directed.

S&F in repair polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, including taking down old water tank cover all as specified and directed.

S&F for Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 250 Ltrs but not exc 500 Ltrs complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 500 Ltrs but not exc 1000 Ltrs complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 1000 Ltrs but not exc 2000 Ltrs complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity 5000 Ltrs complete all as specified and directed.

Removing vegetation growth / plants of any size at the junction of SWR pipe and wall, parapets up to roots and making good disturbed the surface in CM 1:3 up to height of 16 m all as specified and directed.

Cutting of tree branches of girth not less 10 cm falling over the building roof top upto a height of 15m from ground floor and cleaning the roof surface viz., leaves, tree branches etc incl removing of branches, leaves out of MD land all as specified and as directed by Engr-in-charge.

Cleaning of foliage on accessible / non accessible upto six storeyed roof top, mud cakes, rain water pipe outlets to ensure to pass the water through RWP with out any stagnation, etc including proper arrangement of ladder, scaffolding if required and cleaning with water and removal of debris out of MD land complete all as specified and as directed by Engr-in-charge

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of white wash on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts etc. and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper on walls complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper on ceilings complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of Weather proof exterior emulsion paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of old surface complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high including preration of the surface complete all as specified and directed

S&F in repair for 20 mm dia chromium plated pipes for curtain rods complete all as specified and directed.

S&F in repair for Chromium plated brackets and knobs for curtain rods complete all as specified and directed.

S&F in repair brass locks 4 levers for, cup board grade-I of size 50 mm fixed complete all as specified and directed.

S&F in repair 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring complete all as specified and directed.

S&F in repair aluminium anodised barrel towel bolts of extruded section of length 150 mm including taking down old unserviceable barrel tower bolts all as specified and directed.

S&F in repair for 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections etc complete all as specified and as directed.

S&F in repair mild steel butt hinges medium weight cold rolled mild steel of size 100 mm by welding to existing frame complete all as specified and as directed.

S&F in repair for aluminium extruded alloy handles fabricated type anodised of size 150 mm complete all as specified and directed.

S&F hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple all as specified and directed.

G K CONSTRUCTIONS (BID ID -3336761)

VAJRA CONSTRUCTIONS (BID ID -3343152)

Kaveri Enterprise (BID ID -3340455)

SRI LAKSHMI VENKATESHWARA ENTERPRISES (BID ID -3335680)